Jeg har fået overtalt min mor til at prøve Ubuntu som dual-boot med XP, så det skuffede mig naturligvis en del da jeg efter at have installeret Ubuntu opdagede at den ikke kunne komme på internettet - den finder ganske enkelt ikke netværksforbindelsen.
Der er ingen problemer i XP, så det er ikke forbindelsen der er noget galt med.
Her er output af dmesg i terminalen:
Kode: Vælg alt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-3-generic (buildd@vernadsky) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu6) ) #1 SMP Wed Sep 10 16:02:00 UTC 2008 (Ubuntu 2.6.27-3.4-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe53c00 (usable)
[ 0.000000] BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe55c00 - 00000000bfe57c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe57c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] last_pfn = 0xbfe53 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 7f7ee000 - 7ffef224
[ 0.000000] Allocated new RAMDISK: 005e3000 - 00de4224
[ 0.000000] Move RAMDISK from 000000007f7ee000 - 000000007ffef223 to 005e3000 - 00de4223
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD08A, 005C (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: FACP 000FD1A2, 00F4 (r3 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: DSDT FFFCEA8C, 32D3 (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS BFE53C00, 0040
[ 0.000000] ACPI: SSDT FFFD203D, 009C (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD296, 0092 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: BOOT 000FD328, 0028 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: MCFG 000FD350, 003E (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: HPET 000FD38E, 0038 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: SLIC 000FD3C6, 0176 (r1 DELL B8K 14 ASL 61)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005dfba0] TEXT DATA BSS ==> [0000100000 - 00005dfba0]
[ 0.000000] #4 [00005e0000 - 00005e3000] INIT_PG_TABLE ==> [00005e0000 - 00005e3000]
[ 0.000000] #5 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005e3000 - 0000de4224] NEW RAMDISK ==> [00005e3000 - 0000de4224]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x000bfe53
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bfe53
[ 0.000000] On node 0 totalpages: 785902
[ 0.000000] free_area_init_node: node 0, pgdat c04a4f00, node_mem_map c1000000
[ 0.000000] DMA zone: 3959 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 551734 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778993
[ 0.000000] Kernel command line: root=UUID=6A64B59164B5608D loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2127.991 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 3100604k/3144012k available (2661k kernel code, 42088k reserved, 1180k data, 428k init, 2226508k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04c8000 - 0xc0533000 ( 428 kB)
[ 0.004000] .data : 0xc03995af - 0xc04c0640 (1180 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03995af (2661 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.98 BogoMIPS (lpj=8511964)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized <NULL>
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017907] ACPI: Core revision 20080609
[ 0.072199] ACPI: Checking initramfs for custom DSDT
[ 0.491464] ENABLING IO-APIC IRQs
[ 0.491635] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.531328] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 0.532031] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4256.01 BogoMIPS (lpj=8512027)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.616435] CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 0.616450] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.620050] Brought up 2 CPUs
[ 0.620053] Total of 2 processors activated (8511.99 BogoMIPS).
[ 0.620074] CPU0 attaching sched-domain:
[ 0.620077] domain 0: span 0-1 level MC
[ 0.620080] groups: 0 1
[ 0.620086] CPU1 attaching sched-domain:
[ 0.620088] domain 0: span 0-1 level MC
[ 0.620091] groups: 1 0
[ 0.620187] net_namespace: 840 bytes
[ 0.620187] Booting paravirtualized kernel on bare hardware
[ 0.620293] Time: 19:03:24 Date: 07/10/09
[ 0.620293] NET: Registered protocol family 16
[ 0.620293] EISA bus registered
[ 0.620293] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.620293] ACPI: bus type pci registered
[ 0.620293] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.620293] PCI: MCFG area at e0000000 reserved in E820
[ 0.620293] PCI: Using MMCONFIG for extended config space
[ 0.620293] PCI: Using configuration type 1 for base access
[ 0.624237] ACPI: EC: Look up EC in DSDT
[ 0.673744] ACPI: BIOS _OSI(Linux) query ignored
[ 0.673749] ACPI: DMI System Vendor: Dell Inc.
[ 0.673753] ACPI: DMI Product Name: Dell DXP061
[ 0.673757] ACPI: DMI Product Version:
[ 0.673761] ACPI: DMI Board Name: 0WG855
[ 0.673764] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.673768] ACPI: DMI BIOS Date: 11/30/2006
[ 0.673771] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.673776] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.696856] ACPI: Interpreter enabled
[ 0.696861] ACPI: (supports S0 S3 S4 S5)
[ 0.696889] ACPI: Using IOAPIC for interrupt routing
[ 0.793499] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.793499] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:01.0: PME# disabled
[ 0.793499] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:19.0: PME# disabled
[ 0.793499] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:1a.7: PME# disabled
[ 0.793499] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:1b.0: PME# disabled
[ 0.793499] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:1c.0: PME# disabled
[ 0.793499] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:1c.4: PME# disabled
[ 0.793499] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.793499] pci 0000:00:1d.7: PME# disabled
[ 0.793499] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.793499] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.793499] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.793499] pci 0000:00:1f.2: PME# disabled
[ 0.793499] PCI: bridge 0000:00:01.0 io port: [dfff0000d000, f7923e5800000122]
[ 0.793499] PCI: bridge 0000:00:01.0 32bit mmio: [dfefffffdd000000, f7923e5800000122]
[ 0.793499] PCI: bridge 0000:00:01.0 64bit mmio pref: [cfffffffc0000000, f7915000f7923e58]
[ 0.793499] PCI: bridge 0000:00:1c.0 32bit mmio: [dcffffffdcf00000, f792565800000122]
[ 0.793499] pci 0000:00:1e.0: transparent bridge
[ 0.793499] bus 00 -> node 0
[ 0.793499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.796578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.797576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.798254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.798926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 1.814037] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.814037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.816714] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.817471] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.818246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.819009] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.819765] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.820543] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 1.820750] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.820750] pnp: PnP ACPI init
[ 1.820750] ACPI: bus type pnp registered
[ 1.831275] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.831278] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.869452] pnp: PnP ACPI: found 10 devices
[ 1.869454] ACPI: ACPI bus type pnp unregistered
[ 1.869458] PnPBIOS: Disabled by ACPI PNP
[ 1.869473] PCI: Using ACPI for IRQ routing
[ 1.876043] NET: Registered protocol family 8
[ 1.876046] NET: Registered protocol family 20
[ 1.876066] NetLabel: Initializing
[ 1.876066] NetLabel: domain hash size = 128
[ 1.876066] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.876081] NetLabel: unlabeled traffic allowed by default
[ 1.876089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.876095] hpet0: 3 64-bit timers, 14318180 Hz
[ 1.878819] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 1.878821] actual entries 65620
[ 1.878902] AppArmor: AppArmor Filesystem Enabled
[ 1.878921] ACPI: RTC can wake from S4
[ 1.880047] Switched to high resolution mode on CPU 0
[ 1.880490] Switched to high resolution mode on CPU 1
[ 1.884050] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.884064] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 1.884068] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[ 1.884072] system 00:07: iomem range 0x1000000-0xbfe53bff could not be reserved
[ 1.884075] system 00:07: iomem range 0xf0000-0xfffff could not be reserved
[ 1.884079] system 00:07: iomem range 0xc0000-0xd7fff could not be reserved
[ 1.884083] system 00:07: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.884087] system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.884090] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 1.884094] system 00:07: iomem range 0xffc00000-0xffffffff could not be reserved
[ 1.884101] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.884105] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.884108] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.884112] system 00:08: ioport range 0x2e8-0x2ef has been reserved
[ 1.884115] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.884118] system 00:08: ioport range 0x2f8-0x2ff has been reserved
[ 1.884122] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.884125] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.884128] system 00:08: ioport range 0x3c0-0x3e7 could not be reserved
[ 1.884132] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.884135] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.884139] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.884142] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.884145] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.884149] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.884152] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.884155] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.884159] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.884162] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.884166] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.884169] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.884172] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 1.884176] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.884179] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.884183] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.884186] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.884190] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.884193] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.884197] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.884200] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.884204] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.884207] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.884211] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.884214] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.884218] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.884221] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.884225] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.884228] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.884232] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.884236] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.884239] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.884243] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.884246] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.884250] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.884254] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.884257] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.884261] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.884265] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.884278] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.884281] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.884284] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.884286] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.884289] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.884292] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.884295] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.884300] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.884303] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.884306] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.884308] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.884311] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.884314] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.884317] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.884319] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.884322] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.884325] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.884328] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.884330] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.884333] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.884336] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.884339] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.884341] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.884344] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.884347] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.884350] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.884353] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.884356] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.884358] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.884361] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.884364] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.884367] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.884370] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.884372] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.884375] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.884378] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.884381] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.884384] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.884387] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.884389] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.884392] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.884395] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.884398] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.884401] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.915014] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.915017] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.915021] pci 0000:00:01.0: MEM window: 0xdd000000-0xdfefffff
[ 1.915025] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.915029] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.915031] pci 0000:00:1c.0: IO window: disabled
[ 1.915036] pci 0000:00:1c.0: MEM window: 0xdcf00000-0xdcffffff
[ 1.915039] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.915045] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.915047] pci 0000:00:1c.4: IO window: disabled
[ 1.915051] pci 0000:00:1c.4: MEM window: disabled
[ 1.915055] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.915061] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.915063] pci 0000:00:1e.0: IO window: disabled
[ 1.915067] pci 0000:00:1e.0: MEM window: disabled
[ 1.915070] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.915085] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.915089] pci 0000:00:01.0: setting latency timer to 64
[ 1.915096] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.915100] pci 0000:00:1c.0: setting latency timer to 64
[ 1.915107] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.915111] pci 0000:00:1c.4: setting latency timer to 64
[ 1.915118] pci 0000:00:1e.0: setting latency timer to 64
[ 1.915121] bus: 00 index 0 io port: [ffff00000000, f7927e3cf7914c00]
[ 1.915123] bus: 00 index 1 mmio: [ffffffff00000000, f7927e3cf7914c00]
[ 1.915126] bus: 01 index 0 io port: [dfff0000d000, f7914c14f7923c00]
[ 1.915128] bus: 01 index 1 mmio: [dfefffffdd000000, f7914c14f7923c00]
[ 1.915130] bus: 01 index 2 mmio: [cfffffffc0000000, f7914c14f7923c00]
[ 1.915133] bus: 01 index 3 mmio: [0, f7914c14f7923c00]
[ 1.915135] bus: 02 index 0 mmio: [0, f7914c14f7925400]
[ 1.915137] bus: 02 index 1 mmio: [dcffffffdcf00000, f7914c14f7925400]
[ 1.915139] bus: 02 index 2 mmio: [0, f7914c14f7925400]
[ 1.915141] bus: 02 index 3 mmio: [0, f7914c14f7925400]
[ 1.915143] bus: 03 index 0 mmio: [0, f7914c14f7925800]
[ 1.915145] bus: 03 index 1 mmio: [0, f7914c14f7925800]
[ 1.915147] bus: 03 index 2 mmio: [0, f7914c14f7925800]
[ 1.915149] bus: 03 index 3 mmio: [0, f7914c14f7925800]
[ 1.915151] bus: 04 index 0 mmio: [0, f7914c14f7926c00]
[ 1.915153] bus: 04 index 1 mmio: [0, f7914c14f7926c00]
[ 1.915155] bus: 04 index 2 mmio: [0, f7914c14f7926c00]
[ 1.915157] bus: 04 index 3 io port: [ffff00000000, f7914c14f7926c00]
[ 1.915159] bus: 04 index 4 mmio: [ffffffff00000000, f7914c14f7926c00]
[ 1.915167] NET: Registered protocol family 2
[ 1.928099] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.928394] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.928726] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.928915] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.928918] TCP reno registered
[ 1.936147] NET: Registered protocol family 1
[ 1.936295] checking if image is initramfs... it is
[ 2.607262] Freeing initrd memory: 8196k freed
[ 2.607585] Simple Boot Flag at 0x7a set to 0x1
[ 2.608358] audit: initializing netlink socket (disabled)
[ 2.608382] type=2000 audit(1247252605.608:1): initialized
[ 2.614029] highmem bounce pool size: 64 pages
[ 2.614035] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.616212] VFS: Disk quotas dquot_6.5.1
[ 2.616304] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.616406] msgmni has been set to 1725
[ 2.616534] io scheduler noop registered
[ 2.616537] io scheduler anticipatory registered
[ 2.616540] io scheduler deadline registered
[ 2.616551] io scheduler cfq registered (default)
[ 2.616685] pci 0000:01:00.0: Boot video device
[ 2.616785] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 2.616816] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.616845] pci_express 0000:00:01.0:pcie00: allocate port service
[ 2.616888] pci_express 0000:00:01.0:pcie03: allocate port service
[ 2.616968] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.616998] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.617029] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.617072] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.617111] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.617194] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 2.617224] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.617255] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 2.617295] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 2.617334] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 2.617643] isapnp: Scanning for PnP cards...
[ 2.970565] isapnp: No Plug & Play device found
[ 2.997061] hpet_resources: 0xfed00000 is busy
[ 2.997108] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.999077] brd: module loaded
[ 2.999141] input: Macintosh mouse button emulation as /class/input/input0
[ 2.999309] PNP: No PS/2 controller found. Probing ports directly.
[ 3.001892] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.001898] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.004166] mice: PS/2 mouse device common for all mice
[ 3.004328] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.004350] rtc0: alarms up to one day, hpet irqs
[ 3.004463] EISA: Probing bus 0 at eisa.0
[ 3.004466] EISA: Cannot allocate resource for mainboard
[ 3.004472] Cannot allocate resource for EISA slot 2
[ 3.004481] Cannot allocate resource for EISA slot 5
[ 3.004483] Cannot allocate resource for EISA slot 6
[ 3.004492] EISA: Detected 0 cards.
[ 3.004496] cpuidle: using governor ladder
[ 3.004499] cpuidle: using governor menu
[ 3.004833] aufs 20080609
[ 3.005307] Using IPI No-Shortcut mode
[ 3.005468] registered taskstats version 1
[ 3.005591] Magic number: 1:286:91
[ 3.005682] rtc_cmos 00:05: setting system clock to 2009-07-10 19:03:26 UTC (1247252606)
[ 3.005685] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.005687] EDD information not available.
[ 3.005919] Freeing unused kernel memory: 428k freed
[ 3.005944] Write protecting the kernel read-only data: 952k
[ 3.165680] fuse init (API version 7.9)
[ 3.290661] uvesafb: failed to execute /sbin/v86d
[ 3.290665] uvesafb: make sure that the v86d helper is installed and executable
[ 3.290668] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 3.290670] uvesafb: vbe_init() failed with -22
[ 3.290676] uvesafb: probe of uvesafb.0 failed with error -22
[ 3.332170] processor ACPI0007:00: registered as cooling_device0
[ 3.332230] processor ACPI0007:01: registered as cooling_device1
[ 3.939934] usbcore: registered new interface driver usbfs
[ 3.939958] usbcore: registered new interface driver hub
[ 3.957742] usbcore: registered new device driver usb
[ 3.963276] e1000e: Intel(R) PRO/1000 Network Driver - 0.4.1.7
[ 3.963279] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.963311] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.963325] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.966375] USB Universal Host Controller Interface driver v3.0
[ 4.008082] No dock devices found.
[ 4.039466] SCSI subsystem initialized
[ 4.053922] libata version 3.00 loaded.
[ 4.258654] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:21:a2:0f
[ 4.258658] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.258680] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1021ff-0ff
[ 4.258775] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.258787] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.258791] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.258841] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.258873] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 4.259023] usb usb1: configuration #1 chosen from 1 choice
[ 4.259056] hub 1-0:1.0: USB hub found
[ 4.259065] hub 1-0:1.0: 2 ports detected
[ 4.468237] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.468246] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.468250] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.468286] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 4.468312] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 4.468391] usb usb2: configuration #1 chosen from 1 choice
[ 4.468417] hub 2-0:1.0: USB hub found
[ 4.468424] hub 2-0:1.0: 2 ports detected
[ 4.576022] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.676231] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.676246] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.676250] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.676295] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 4.680188] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.680194] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.680205] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00
[ 4.700051] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.700148] usb usb3: configuration #1 chosen from 1 choice
[ 4.700184] hub 3-0:1.0: USB hub found
[ 4.700194] hub 3-0:1.0: 4 ports detected
[ 4.908309] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.908328] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.908332] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.908361] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.908388] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 4.908479] usb usb4: configuration #1 chosen from 1 choice
[ 4.908505] hub 4-0:1.0: USB hub found
[ 4.908512] hub 4-0:1.0: 2 ports detected
[ 5.100020] usb 1-1: device not accepting address 2, error -71
[ 5.116474] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.116481] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.116484] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.116631] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.116653] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 5.116864] usb usb5: configuration #1 chosen from 1 choice
[ 5.116893] hub 5-0:1.0: USB hub found
[ 5.116900] hub 5-0:1.0: 2 ports detected
[ 5.156047] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.220503] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.220509] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.220513] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.220540] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.220567] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 5.220643] usb usb6: configuration #1 chosen from 1 choice
[ 5.220668] hub 6-0:1.0: USB hub found
[ 5.220674] hub 6-0:1.0: 2 ports detected
[ 5.396023] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 5.428508] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.428517] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.428520] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.428548] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 5.432457] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.432463] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.432467] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[ 5.520031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.520130] usb usb7: configuration #1 chosen from 1 choice
[ 5.520164] hub 7-0:1.0: USB hub found
[ 5.520172] hub 7-0:1.0: 6 ports detected
[ 5.528669] usb 3-1: configuration #1 chosen from 1 choice
[ 5.528960] hub 3-1:1.0: USB hub found
[ 5.529002] hub 3-1:1.0: 4 ports detected
[ 5.728209] ahci 0000:00:1f.2: version 3.0
[ 5.728225] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 5.728358] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 5.728361] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
[ 5.728365] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.728862] scsi0 : ahci
[ 5.728950] scsi1 : ahci
[ 5.729001] scsi2 : ahci
[ 5.729051] scsi3 : ahci
[ 5.729100] scsi4 : ahci
[ 5.729682] scsi5 : ahci
[ 5.729719] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 220
[ 5.729722] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 220
[ 5.729725] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 220
[ 5.729728] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 220
[ 5.729731] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970300 irq 220
[ 5.729734] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 220
[ 6.048040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.067843] ata1.00: ATA-7: WDC WD3200KS-75PFB0, 21.00M21, max UDMA/133
[ 6.067847] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.068593] ata1.00: configured for UDMA/133
[ 6.112034] usb 7-2: new high speed USB device using ehci_hcd and address 2
[ 6.318174] usb 7-2: configuration #1 chosen from 1 choice
[ 6.612180] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 6.787733] usb 2-1: configuration #1 chosen from 1 choice
[ 6.808038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.841472] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H553A, DE04, max UDMA/33
[ 6.841475] ata2.00: applying bridge limits
[ 6.875669] ata2.00: configured for UDMA/33
[ 7.028022] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 7.205996] usb 6-2: configuration #1 chosen from 1 choice
[ 7.208057] ata3: SATA link down (SStatus 0 SControl 300)
[ 7.544026] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.880036] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.216026] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.232192] scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-75P 21.0 PQ: 0 ANSI: 5
[ 8.233482] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H553A DE04 PQ: 0 ANSI: 5
[ 8.268315] Driver 'sr' needs updating - please use bus_type methods
[ 8.271182] Driver 'sd' needs updating - please use bus_type methods
[ 8.271611] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 8.271640] sd 0:0:0:0: [sda] Write Protect is off
[ 8.271642] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.271680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.271765] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 8.271785] sd 0:0:0:0: [sda] Write Protect is off
[ 8.271787] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.271823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.271827] sda: sda1 sda2 sda3
[ 8.274637] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.282495] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 8.282500] Uniform CD-ROM driver Revision: 3.20
[ 8.282577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.287868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.287906] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.333358] usbcore: registered new interface driver libusual
[ 8.333360] usbcore: registered new interface driver hiddev
[ 8.339441] Initializing USB Mass Storage driver...
[ 8.339572] scsi6 : SCSI emulation for USB Mass Storage devices
[ 8.340243] usb-storage: device found at 2
[ 8.340245] usb-storage: waiting for device to settle before scanning
[ 8.340279] scsi7 : SCSI emulation for USB Mass Storage devices
[ 8.340647] usb-storage: device found at 2
[ 8.340649] usb-storage: waiting for device to settle before scanning
[ 8.349905] input: Logitech USB Receiver as /class/input/input1
[ 8.353721] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 8.382621] Fixing up Logitech keyboard report descriptor
[ 8.383622] input: Logitech USB Receiver as /class/input/input2
[ 8.383923] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 8.383960] usbcore: registered new interface driver usb-storage
[ 8.383963] USB Mass Storage support registered.
[ 8.384081] usbcore: registered new interface driver usbhid
[ 8.384084] usbhid: v2.6:USB HID core driver
[ 9.247807] loop: module loaded
[ 9.261396] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.261399] EXT3-fs: write access will be enabled during recovery.
[ 9.582033] kjournald starting. Commit interval 5 seconds
[ 9.582050] EXT3-fs: recovery complete.
[ 9.582217] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.258397] udevd version 124 started
[ 12.705998] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.391504] usb-storage: device scan complete
[ 13.391569] usb-storage: device scan complete
[ 13.394832] scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0
[ 13.395406] scsi 7:0:0:0: Direct-Access 040514 Flash Disk 7.78 PQ: 0 ANSI: 2
[ 13.398452] scsi 6:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
[ 13.400392] sd 7:0:0:0: [sdb] 64000 512-byte hardware sectors (33 MB)
[ 13.402452] scsi 6:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
[ 13.405391] sd 7:0:0:0: [sdb] Write Protect is off
[ 13.405393] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 13.405395] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 13.405702] scsi 6:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
[ 13.417400] sd 7:0:0:0: [sdb] 64000 512-byte hardware sectors (33 MB)
[ 13.422404] sd 7:0:0:0: [sdb] Write Protect is off
[ 13.422407] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 13.422410] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 13.422414] sdb: sdb1
[ 13.428552] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 13.428704] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 13.433154] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 13.433237] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 13.438058] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 13.438172] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 13.445899] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 13.446023] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 13.487704] Linux agpgart interface v0.103
[ 13.494328] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 13.494455] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 13.794486] input: Power Button (FF) as /class/input/input3
[ 13.844368] ACPI: Power Button (FF) [PWRF]
[ 13.844427] input: Power Button (CM) as /class/input/input4
[ 13.872751] iTCO_vendor_support: vendor-support=0
[ 13.874877] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.874964] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 13.874973] iTCO_wdt: No card detected
[ 13.908365] ACPI: Power Button (CM) [VBTN]
[ 13.938404] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.001559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.432693] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.432711] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.276587] lp: driver loaded but no devices found
[ 15.975096] EXT3 FS on loop0, internal journal
[ 21.515613] Adding 488272k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:488272k
[ 21.607449] type=1505 audit(1247249025.444:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4136
[ 21.749969] type=1505 audit(1247249025.588:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4141
[ 21.750136] type=1505 audit(1247249025.588:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4141
[ 21.853040] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.248724] ACPI: WMI: Mapper loaded
[ 23.672110] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.724305] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 23.724312] apm: disabled - APM is not SMP safe.
[ 23.897960] ppdev: user-space parallel port driver
[ 26.196857] Bluetooth: Core ver 2.13
[ 26.198177] NET: Registered protocol family 31
[ 26.198181] Bluetooth: HCI device and connection manager initialized
[ 26.198187] Bluetooth: HCI socket layer initialized
[ 26.211298] Bluetooth: L2CAP ver 2.11
[ 26.211303] Bluetooth: L2CAP socket layer initialized
[ 26.323086] Bluetooth: RFCOMM socket layer initialized
[ 26.323459] Bluetooth: RFCOMM TTY layer initialized
[ 26.323463] Bluetooth: RFCOMM ver 1.10
[ 28.401841] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 32.448895] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 32.448902] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 32.533182] NET: Registered protocol family 17
[ 35.718265] 0000:00:19.0: eth0: changing MTU from 1500 to 1492
[ 37.272881] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 37.272887] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 50.445301] NET: Registered protocol family 10
[ 50.446278] lo: Disabled Privacy Extensions
[ 60.676025] eth0: no IPv6 routers present
og her er output fra lspci i terminalen
Kode: Vælg alt
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller (rev 02)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
Kan nogen se hvad der er galt?
Det er intrepid der er installeret hos hende, for jeg havde på daværende tidspunkt ikke nogen nyere cd.