Endnu en totalt grønskolling henvender sig pga det wireless....
Jeg har som alle andre jo også siger, søgt og søgt og prøvet og prøvet. Men jeg er helt på bar bund stadigvæk.
Det korte af det lange, så aner ubuntu slet ikke maskinen har wireless. Jeg kørte den der iw config jeg så en anden blev bedt om og den siger der intet trådløst er...
Outputs:
ole@ole-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Atheros Communications Inc. AR5418 802.11abgn Wireless PCI Express Adapter (rev 01)
02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
02:05.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:05.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
02:05.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
02:05.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller
ole@ole-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
dmesg|grep ja der skulle vist osse lige have været "navnet" på wireless'en med også. Men jeg kunne ik lige finde ud af det...! Stjal bare de her kommandoer fra en anden post, for at være på forkant..
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f650000 (usable)
[ 0.000000] BIOS-e820: 000000003f650000 - 000000003f659000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f659000 - 000000003f65a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f65a000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7880
[ 0.000000] Entering add_active_range(0, 0, 259664) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259664
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259664
[ 0.000000] On node 0 totalpages: 259664
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 236 pages used for memmap
[ 0.000000] HighMem zone: 30052 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F77F0 checksum 0
[ 0.000000] ACPI: RSDP 000F77F0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3F6530DD, 0084 (r1 MITAC_ MITACMTC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F658BE0, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 3F653CB1, 4EBB (r1 INTEL CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 3F659FC0, 0040
[ 0.000000] ACPI: APIC 3F658CD4, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F658D3C, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F658D74, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 3F658DB0, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
[ 0.000000] ACPI: TMOR 3F658DE2, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: APIC 3F658E08, 005A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SLIC 3F658E62, 0176 (r1 MITAC_ MITACMTC 6040000 LTP 1)
[ 0.000000] ACPI: BOOT 3F658FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3F653AFD, 01B4 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F653647, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F653161, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 0000000000097000 - 0000000000098000
[ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257636
[ 0.000000] Kernel command line: root=UUID=78A0BACCA0BA905C loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 798.011 MHz processor.
[ 25.023020] Console: colour VGA+ 80x25
[ 25.023027] console [tty0] enabled
[ 25.023505] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 25.024351] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 25.080037] Memory: 1017216k/1038656k available (2177k kernel code, 20644k reserved, 1006k data, 368k init, 121152k highmem)
[ 25.080057] virtual kernel memory layout:
[ 25.080059] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 25.080062] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 25.080065] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 25.080068] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 25.080070] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 25.080073] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 25.080075] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 25.080083] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 25.080165] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 25.080466] hpet clockevent registered
[ 25.160461] Calibrating delay using timer specific routine.. 1598.20 BogoMIPS (lpj=3196415)
[ 25.160506] Security Framework initialized
[ 25.160520] SELinux: Disabled at boot.
[ 25.160551] AppArmor: AppArmor initialized
[ 25.160559] Failure registering capabilities with primary security module.
[ 25.160576] Mount-cache hash table entries: 512
[ 25.160831] Initializing cgroup subsys ns
[ 25.160841] Initializing cgroup subsys cpuacct
[ 25.160862] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 25.160885] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 25.160890] CPU: L2 cache: 512K
[ 25.160896] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 25.160915] Compat vDSO mapped to ffffe000.
[ 25.160936] Checking 'hlt' instruction... OK.
[ 25.177173] SMP alternatives: switching to UP code
[ 25.180859] Freeing SMP alternatives: 11k freed
[ 25.181082] Early unpacking initramfs... done
[ 25.988874] ACPI: Core revision 20070126
[ 25.988991] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 26.058149] CPU0: Intel Genuine Intel(R) processor 800MHz stepping 08
[ 26.058194] Total of 1 processors activated (1598.20 BogoMIPS).
[ 26.058411] ENABLING IO-APIC IRQs
[ 26.058638] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 26.204394] Brought up 1 CPUs
[ 26.204438] CPU0 attaching sched-domain:
[ 26.204444] domain 0: span 01
[ 26.204448] groups: 01
[ 26.204786] net_namespace: 64 bytes
[ 26.204799] Booting paravirtualized kernel on bare hardware
[ 26.205735] Time: 23:01:39 Date: 09/15/08
[ 26.205785] NET: Registered protocol family 16
[ 26.206205] EISA bus registered
[ 26.206215] ACPI: bus type pci registered
[ 26.206975] PCI: PCI BIOS revision 3.00 entry at 0xfddc1, last bus=3
[ 26.206984] PCI: Using configuration type 1
[ 26.207000] Setting up standard PCI resources
[ 26.211322] ACPI: EC: Look up EC in DSDT
[ 26.214185] ACPI: BIOS _OSI(Linux) query ignored
[ 26.214190] ACPI: DMI System Vendor: Zepto
[ 26.214194] ACPI: DMI Product Name: NotusA12DK
[ 26.214198] ACPI: DMI Product Version: Not Applicable
[ 26.214202] ACPI: DMI Board Name: 8212
[ 26.214205] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
[ 26.214211] ACPI: DMI BIOS Date: 04/25/2008
[ 26.214214] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 26.214219] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 26.215143] ACPI: Interpreter enabled
[ 26.215154] ACPI: (supports S0 S3 S4 S5)
[ 26.215185] ACPI: Using IOAPIC for interrupt routing
[ 26.215783] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 26.224769] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 26.224777] ACPI: EC: driver started in interrupt mode
[ 26.224878] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.225856] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 26.225864] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 26.226801] PCI: Transparent bridge - 0000:00:1e.0
[ 26.226938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.227618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 26.227908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 26.239074] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 26.239261] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 26.239441] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 26.239619] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 26.239797] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 26.239974] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 26.240154] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 26.240346] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 26.240651] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.240726] pnp: PnP ACPI init
[ 26.240742] ACPI: bus type pnp registered
[ 26.244469] pnp: PnP ACPI: found 11 devices
[ 26.244475] ACPI: ACPI bus type pnp unregistered
[ 26.244484] PnPBIOS: Disabled by ACPI PNP
[ 26.244972] PCI: Using ACPI for IRQ routing
[ 26.244979] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 26.316282] NET: Registered protocol family 8
[ 26.316288] NET: Registered protocol family 20
[ 26.316369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 26.316378] hpet0: 3 64-bit timers, 14318180 Hz
[ 26.317448] AppArmor: AppArmor Filesystem Enabled
[ 26.320272] Time: tsc clocksource has been installed.
[ 26.320309] Switched to high resolution mode on CPU 0
[ 26.328371] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 26.328379] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 26.328386] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 26.328393] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 26.328400] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 26.328406] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 26.328413] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 26.328430] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 26.328446] system 00:06: ioport range 0x6c0-0x6df has been reserved
[ 26.328452] system 00:06: ioport range 0x800-0x80f has been reserved
[ 26.328458] system 00:06: ioport range 0xa00-0xa0f has been reserved
[ 26.328464] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 26.328471] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 26.328477] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 26.359396] PCI: Bridge: 0000:00:01.0
[ 26.359400] IO window: disabled.
[ 26.359408] MEM window: f0100000-f01fffff
[ 26.359413] PREFETCH window: disabled.
[ 26.359431] PCI: Bus 3, cardbus bridge: 0000:02:05.0
[ 26.359435] IO window: 00002400-000024ff
[ 26.359443] IO window: 00002800-000028ff
[ 26.359450] PREFETCH window: 50000000-53ffffff
[ 26.359458] MEM window: 54000000-57ffffff
[ 26.359466] PCI: Bridge: 0000:00:1e.0
[ 26.359471] IO window: 2000-2fff
[ 26.359480] MEM window: f0200000-f02fffff
[ 26.359486] PREFETCH window: disabled.
[ 26.359524] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.359534] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 26.359553] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 26.359578] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 26.359588] PCI: Setting latency timer of device 0000:02:05.0 to 64
[ 26.359614] NET: Registered protocol family 2
[ 26.396325] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 26.396799] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 26.398448] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 26.399281] TCP: Hash tables configured (established 131072 bind 65536)
[ 26.399288] TCP reno registered
[ 26.408500] checking if image is initramfs... it is
[ 27.977869] Freeing initrd memory: 7572k freed
[ 27.978186] Simple Boot Flag at 0x36 set to 0x1
[ 27.979021] audit: initializing netlink socket (disabled)
[ 27.979045] audit(1221519700.728:1): initialized
[ 27.979340] highmem bounce pool size: 64 pages
[ 27.983472] VFS: Disk quotas dquot_6.5.1
[ 27.983633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.983968] io scheduler noop registered
[ 27.983973] io scheduler anticipatory registered
[ 27.983977] io scheduler deadline registered
[ 27.984006] io scheduler cfq registered (default)
[ 27.984030] Boot video device is 0000:00:02.0
[ 27.984350] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.984402] assign_interrupt_mode Found MSI capability
[ 27.984445] Allocate Port Service[0000:00:01.0:pcie00]
[ 27.984528] Allocate Port Service[0000:00:01.0:pcie02]
[ 27.984995] isapnp: Scanning for PnP cards...
[ 28.339430] isapnp: No Plug & Play device found
[ 28.417102] Real Time Clock Driver v1.12ac
[ 28.417494] hpet_resources: 0xfed00000 is busy
[ 28.417530] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 28.420215] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.420364] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 28.420574] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 28.422728] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 28.423751] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.423759] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 28.423764] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 28.423770] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 28.423775] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 28.435957] mice: PS/2 mouse device common for all mice
[ 28.436203] EISA: Probing bus 0 at eisa.0
[ 28.436215] Cannot allocate resource for EISA slot 1
[ 28.436220] Cannot allocate resource for EISA slot 2
[ 28.436254] EISA: Detected 0 cards.
[ 28.436259] cpuidle: using governor ladder
[ 28.436263] cpuidle: using governor menu
[ 28.436429] NET: Registered protocol family 1
[ 28.436485] Using IPI No-Shortcut mode
[ 28.436542] registered taskstats version 1
[ 28.436735] Magic number: 8:547:49
[ 28.436898] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 28.436902] EDD information not available.
[ 28.437172] Freeing unused kernel memory: 368k freed
[ 28.475825] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 29.921413] fuse init (API version 7.9)
[ 29.972797] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 29.972812] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 29.972851] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 29.976346] ACPI: Thermal Zone [TZ0] (63 C)
[ 31.519290] usbcore: registered new interface driver usbfs
[ 31.519334] usbcore: registered new interface driver hub
[ 31.539842] usbcore: registered new device driver usb
[ 31.567219] USB Universal Host Controller Interface driver v3.0
[ 31.570543] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 31.570563] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 31.570572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 31.571025] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 31.571074] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[ 31.571356] usb usb1: configuration #1 chosen from 1 choice
[ 31.571405] hub 1-0:1.0: USB hub found
[ 31.571417] hub 1-0:1.0: 2 ports detected
[ 31.675322] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 31.675344] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 31.675353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 31.675399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 31.675445] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 31.675661] usb usb2: configuration #1 chosen from 1 choice
[ 31.675709] hub 2-0:1.0: USB hub found
[ 31.675720] hub 2-0:1.0: 2 ports detected
[ 31.719581] SCSI subsystem initialized
[ 31.779479] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 31.779501] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 31.779509] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 31.779558] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 31.779603] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[ 31.779834] usb usb3: configuration #1 chosen from 1 choice
[ 31.779882] hub 3-0:1.0: USB hub found
[ 31.779893] hub 3-0:1.0: 2 ports detected
[ 31.883283] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 31.883305] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 31.883313] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 31.883359] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 31.883405] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 31.883617] usb usb4: configuration #1 chosen from 1 choice
[ 31.883662] hub 4-0:1.0: USB hub found
[ 31.883673] hub 4-0:1.0: 2 ports detected
[ 31.907153] libata version 3.00 loaded.
[ 31.987460] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 31.987486] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.987493] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.987547] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 31.991465] ehci_hcd 0000:00:1d.7: debug port 1
[ 31.991476] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 31.991489] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0544000
[ 32.019254] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 32.031097] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.031338] usb usb5: configuration #1 chosen from 1 choice
[ 32.031387] hub 5-0:1.0: USB hub found
[ 32.031399] hub 5-0:1.0: 8 ports detected
[ 32.135385] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 32.135436] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 32.135881] eth0: RTL8169sc/8110sc at 0xf883c800, 00:40:d0:e7:4f:29, XID 18000000 IRQ 21
[ 32.164236] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 32.164298] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 32.164324] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 32.180523] ata_piix 0000:00:1f.1: version 2.12
[ 32.180553] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 32.180615] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 32.199054] scsi0 : ata_piix
[ 32.211050] scsi1 : ata_piix
[ 32.212017] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 32.212024] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 32.375773] ata1.00: ATA-6: TOSHIBA MK8009GAH, BS011A, max UDMA/100
[ 32.375782] ata1.00: 156301488 sectors, multi 16: LBA48
[ 32.375813] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 32.383663] ata1.00: configured for UDMA/33
[ 32.383735] ata2: port disabled. ignoring.
[ 32.383969] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8009GA BS01 PQ: 0 ANSI: 5
[ 32.934944] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 33.113451] usb 2-1: configuration #1 chosen from 1 choice
[ 33.219531] Driver 'sd' needs updating - please use bus_type methods
[ 33.219677] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 33.219702] sd 0:0:0:0: [sda] Write Protect is off
[ 33.219707] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.219743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.219830] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 33.219851] sd 0:0:0:0: [sda] Write Protect is off
[ 33.219856] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.219889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.219897] sda: sda1
[ 33.258173] sd 0:0:0:0: [sda] Attached SCSI disk
[ 33.275456] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.358862] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 33.533583] usb 3-2: configuration #1 chosen from 1 choice
[ 33.536702] usbcore: registered new interface driver hiddev
[ 33.540995] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 33.550917] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
[ 33.556418] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.1/input/input3
[ 33.570915] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1
[ 33.570951] usbcore: registered new interface driver usbhid
[ 33.570959] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 34.267394] loop: module loaded
[ 34.316379] kjournald starting. Commit interval 5 seconds
[ 34.316404] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.743857] Clocksource tsc unstable (delta = -304508188 ns)
[ 47.747837] Time: hpet clocksource has been installed.
[ 49.363579] Linux agpgart interface v0.102
[ 49.454915] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 49.520298] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 49.597741] agpgart: Detected an Intel 945GM Chipset.
[ 49.598014] agpgart: Detected 7932K stolen memory.
[ 49.711557] agpgart: AGP aperture is 256M @ 0xd0000000
[ 50.108362] intel_rng: FWH not detected
[ 50.513349] iTCO_vendor_support: vendor-support=0
[ 50.567605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 50.568787] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 50.569219] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 51.285684] input: Power Button (FF) as /devices/virtual/input/input4
[ 51.297891] ACPI: Power Button (FF) [PWRF]
[ 51.298065] input: Lid Switch as /devices/virtual/input/input5
[ 51.300334] ACPI: Lid Switch [LID0]
[ 51.300509] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 51.319100] ACPI: Sleep Button (CM) [SBTN]
[ 51.843210] ACPI: AC Adapter [AC] (on-line)
[ 51.970223] ACPI: Battery Slot [BAT0] (battery present)
[ 52.680232] Yenta: CardBus bridge found at 0000:02:05.0 [1071:8212]
[ 52.680262] Yenta: Enabling burst memory read transactions
[ 52.680271] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 52.680275] Yenta: Routing CardBus interrupts to PCI
[ 52.680284] Yenta TI: socket 0000:02:05.0, mfunc 0x00a01b02, devctl 0x64
[ 52.915584] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 52.915593] Socket status: 30000006
[ 52.915598] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 52.915608] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 52.915614] cs: IO port probe 0x2000-0x2fff: clean.
[ 52.916109] pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
[ 53.162838] ACPI: PCI Interrupt 0000:02:05.2[A] -> GSI 20 (level, low) -> IRQ 17
[ 53.162855] PCI: Setting latency timer of device 0000:02:05.2 to 64
[ 53.998710] sdhci: Secure Digital Host Controller Interface driver
[ 53.998717] sdhci: Copyright(c) Pierre Ossman
[ 53.998846] sdhci: SDHCI controller found at 0000:02:05.3 [104c:803c] (rev 0)
[ 53.998878] ACPI: PCI Interrupt 0000:02:05.3[A] -> GSI 20 (level, low) -> IRQ 17
[ 53.998916] PCI: Setting latency timer of device 0000:02:05.3 to 64
[ 53.999025] mmc0: SDHCI at 0xf0208c00 irq 17 DMA
[ 54.151045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 54.166489] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 57.553982] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 58.409365] tpm_inf_pnp 00:08: Found TPM with ID IFX0102
[ 58.409432] tpm_inf_pnp 00:08: TPM found: config base 0x4e, data base 0x6f0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 58.508343] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 58.508395] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 58.539315] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 60.239535] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 60.271970] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 61.665786] cs: IO port probe 0x100-0x3af: clean.
[ 61.667793] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 61.668658] cs: IO port probe 0x820-0x8ff: clean.
[ 61.669426] cs: IO port probe 0xc00-0xcf7: clean.
[ 61.670411] cs: IO port probe 0xa00-0xaff: clean.
[ 62.173917] lp: driver loaded but no devices found
[ 63.209948] EXT3 FS on loop0, internal journal
[ 86.005859] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 87.114113] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 87.992753] No dock devices found.
[ 90.339538] apm: BIOS not found.
[ 90.526473] ppdev: user-space parallel port driver
[ 90.784613] audit(1221516164.774:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4898 profile="/usr/sbin/cupsd" namespace="default"
[ 121.469816] Marking TSC unstable due to: cpufreq changes.
[ 92.058287] r8169: eth0: link up
[ 122.965609] Bluetooth: Core ver 2.11
[ 122.966795] NET: Registered protocol family 31
[ 122.966806] Bluetooth: HCI device and connection manager initialized
[ 122.966815] Bluetooth: HCI socket layer initialized
[ 123.012488] Bluetooth: L2CAP ver 2.9
[ 123.012498] Bluetooth: L2CAP socket layer initialized
[ 92.424728] Bluetooth: RFCOMM socket layer initialized
[ 92.424754] Bluetooth: RFCOMM TTY layer initialized
[ 92.424758] Bluetooth: RFCOMM ver 1.8
[ 94.952452] NET: Registered protocol family 17
[ 96.310972] [drm] Initialized drm 1.1.0 20060810
[ 96.317088] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 96.317104] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 96.317898] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 130.576832] NET: Registered protocol family 10
[ 130.577842] lo: Disabled Privacy Extensions
[ 139.146577] eth0: no IPv6 routers present
[ 193.492392] usb 5-1: new high speed USB device using ehci_hcd and address 4
[ 193.638152] usb 5-1: configuration #1 chosen from 1 choice
[ 145.520606] usbcore: registered new interface driver libusual
[ 145.630027] Initializing USB Mass Storage driver...
[ 145.638872] scsi2 : SCSI emulation for USB Mass Storage devices
[ 145.643360] usbcore: registered new interface driver usb-storage
[ 145.643373] USB Mass Storage support registered.
[ 145.644147] usb-storage: device found at 4
[ 145.644155] usb-storage: waiting for device to settle before scanning
[ 198.235729] usb-storage: device scan complete
[ 198.236742] scsi 2:0:0:0: Direct-Access Hitachi HDP725050GLA360 GM4O PQ: 0 ANSI: 0
[ 198.251390] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 198.252292] sd 2:0:0:0: [sdb] Write Protect is off
[ 198.252304] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 198.252311] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 198.253912] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 198.254793] sd 2:0:0:0: [sdb] Write Protect is off
[ 198.254804] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 198.254811] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 198.254823] sdb: sdb1
[ 198.282966] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 198.283066] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 514.431139] usb 5-2: new high speed USB device using ehci_hcd and address 5
[ 514.565598] usb 5-2: configuration #1 chosen from 1 choice
[ 386.125887] scsi3 : SCSI emulation for USB Mass Storage devices
[ 386.129197] usb-storage: device found at 5
[ 386.129206] usb-storage: waiting for device to settle before scanning
[ 515.697506] usb-storage: device scan complete
[ 515.698411] scsi 3:0:0:0: Direct-Access JetFlash TS16GJFV20 8.07 PQ: 0 ANSI: 2
[ 515.713957] sd 3:0:0:0: [sdc] 31948800 512-byte hardware sectors (16358 MB)
[ 515.714594] sd 3:0:0:0: [sdc] Write Protect is off
[ 515.714605] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 515.714613] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 515.717701] sd 3:0:0:0: [sdc] 31948800 512-byte hardware sectors (16358 MB)
[ 515.718341] sd 3:0:0:0: [sdc] Write Protect is off
[ 515.718352] sd 3:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 515.718359] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 515.718371] sdc: unknown partition table
[ 387.053118] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 387.053200] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 504.815848] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
[ 504.815861] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 504.815868] pcmcia: see http://www.kernel.org/pub/linux/utils/k ... cmcia.html for details.
Som sagt, så er jeg totalt rookie. Men det jeg får ud af alt det, er at det lader til fejlen ligger et helt andet sted... Det forklarer nok også hvorfor de guider jeg har forsøgt at få til at afhjælpe problemet har været nyttesløse. F.eks. Så er der et tomt felt i "hardware drivers"... Der står intet overhovedet. Som om jeg ingen drivere har whatsoever...?Og "system->preferences->hardware information" Gik jeg i stå ved, da "hardware information" slet ikke eksisterer. Så er den jo lidt svær at åbne....? Og jeg kan ikke finde den andre steder... Ud over det, så har jeg en wireless manager til at koble på og af tilgængelige netværk, men der er intet..Jeg har en manuel knap på maskinen til wireless. Den var tændt under installationen og også da jeg lukkede vista ned. Og der er intet i vejen der. Ellers, så har jeg ingen problem med at losse stikket i. Der virker nettet. Og resten af funktionerne på maskinene lader til at virke fint.
Det skal lige siges jeg kører med engelsk som sprog ( DK layout på key...)...
Nå, men jeg håber nogle kan fortælle mig hva jeg stiller op! For jeg aner ikke hvad jeg skal stille op..
Hilsen Ole
Så hvad gør jeg nu?
