Min opstartstid til ubuntu er begyndt at blive længere for tiden. Efter jeg installerede 10.10 og 3 måneder frem var der bare knald på opstarten og det tog højest 20 sek efter Gnub menuen til Ubuntu var klar.
Men her i den sidste måned er det begyndt at tage et sted mellem 45 til et minut til den er klar.
Jeg har opdateret maskine, ryddet op og fjernet de programmer der ikke skal opsatarte automatisk ved opstart.
Ubuntu 10.10 er nok ved at blive gammel
-
Viborg
- Indlæg: 186
- Tilmeldt: 17. nov 2008, 14:30
- Geografisk sted: Aars
-
AJenbo
- Admin
- Indlæg: 20878
- Tilmeldt: 15. nov 2009, 15:04
- IRC nickname: AJenbo
- Geografisk sted: Vanløse, København
Re: Ubuntu 10.10 er nok ved at blive gammel
Gem output fra dmesg så kan vi prøve at se hva det er der tager tid under opstarten
-
Viborg
- Indlæg: 186
- Tilmeldt: 17. nov 2008, 14:30
- Geografisk sted: Aars
Re: Ubuntu 10.10 er nok ved at blive gammel
Kode: Vælg alt
[ 0.256725] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.256728] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.256731] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.256734] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.256737] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.256740] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.256742] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.256745] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.256748] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.256751] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.256754] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.256757] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.256760] pci_bus 0000:06: resource 1 [mem 0xc8000000-0xc9ffffff]
[ 0.256763] pci_bus 0000:06: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.256766] pci_bus 0000:08: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.256768] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.256771] pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.256814] NET: Registered protocol family 2
[ 0.256880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.257135] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.257683] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.258044] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.258048] TCP reno registered
[ 0.258051] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.258066] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.258202] NET: Registered protocol family 1
[ 0.258227] pci 0000:00:02.0: Boot video device
[ 0.258444] PCI: CLS 64 bytes, default 64
[ 0.258548] Simple Boot Flag at 0x36 set to 0x1
[ 0.258712] cpufreq-nforce2: No nForce2 chipset.
[ 0.258746] Scanning for low memory corruption every 60 seconds
[ 0.258912] audit: initializing netlink socket (disabled)
[ 0.258928] type=2000 audit(1303994414.252:1): initialized
[ 0.272085] Trying to unpack rootfs image as initramfs...
[ 0.288288] highmem bounce pool size: 64 pages
[ 0.288296] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.293822] VFS: Disk quotas dquot_6.5.2
[ 0.293897] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.300178] fuse init (API version 7.14)
[ 0.300311] msgmni has been set to 1612
[ 0.590148] Freeing initrd memory: 10496k freed
[ 0.600165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.600170] io scheduler noop registered
[ 0.600172] io scheduler deadline registered
[ 0.600191] io scheduler cfq registered (default)
[ 0.600329] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.600386] alloc irq_desc for 40 on node -1
[ 0.600389] alloc kstat_irqs on node -1
[ 0.600403] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.600525] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.600579] alloc irq_desc for 41 on node -1
[ 0.600581] alloc kstat_irqs on node -1
[ 0.600591] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.600705] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.600758] alloc irq_desc for 42 on node -1
[ 0.600760] alloc kstat_irqs on node -1
[ 0.600770] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.600886] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.600939] alloc irq_desc for 43 on node -1
[ 0.600941] alloc kstat_irqs on node -1
[ 0.600951] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.601082] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.601219] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.601489] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 960k, total 960k
[ 0.601493] vesafb: mode is 800x600x16, linelength=1600, pages=0
[ 0.601495] vesafb: scrolling: redraw
[ 0.601499] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.612746] Console: switching to colour frame buffer device 100x37
[ 0.623708] fb0: VESA VGA frame buffer device
[ 0.623730] intel_idle: MWAIT substates: 0x1110
[ 0.623732] intel_idle: does not run on family 6 model 22
[ 0.623883] ACPI: AC Adapter [ACAD] (on-line)
[ 0.623968] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.624026] ACPI: Lid Switch [LID0]
[ 0.624077] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.624082] ACPI: Power Button [PWRB]
[ 0.624140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.624144] ACPI: Power Button [PWRF]
[ 0.624440] ACPI: acpi_idle registered with cpuidle
[ 0.625147] Monitor-Mwait will be used to enter C-1 state
[ 0.625176] Monitor-Mwait will be used to enter C-2 state
[ 0.625198] Monitor-Mwait will be used to enter C-3 state
[ 0.625203] Marking TSC unstable due to TSC halts in idle
[ 0.627509] Switching to clocksource hpet
[ 0.648323] ERST: Table is not found!
[ 0.648607] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.650276] brd: module loaded
[ 0.650881] loop: module loaded
[ 0.651126] ata_piix 0000:00:1f.1: version 2.13
[ 0.651142] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.651184] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.651375] scsi0 : ata_piix
[ 0.651469] isapnp: Scanning for PnP cards...
[ 0.656996] scsi1 : ata_piix
[ 0.657767] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.657771] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.657797] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.657803] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.658355] ACPI: Battery Slot [BAT1] (battery present)
[ 0.833076] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.844975] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, ED01, max UDMA/33
[ 0.888894] scsi2 : ata_piix
[ 0.888966] scsi3 : ata_piix
[ 0.890355] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 0.890364] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 0.890757] Fixed MDIO Bus: probed
[ 0.890799] PPP generic driver version 2.4.2
[ 0.890859] tun: Universal TUN/TAP device driver, 1.6
[ 0.890862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.890960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.890985] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.891007] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.891012] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.891055] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.891096] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.894974] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.894994] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504000
[ 0.986172] isapnp: No Plug & Play device found
[ 0.986187] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.986329] hub 1-0:1.0: USB hub found
[ 0.986334] hub 1-0:1.0: 4 ports detected
[ 0.986410] alloc irq_desc for 23 on node -1
[ 0.986413] alloc kstat_irqs on node -1
[ 0.986421] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.986435] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.986439] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.986478] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.986513] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.990401] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.990422] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400
[ 0.994758] ata1.00: configured for UDMA/33
[ 1.004081] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.004294] hub 2-0:1.0: USB hub found
[ 1.004304] hub 2-0:1.0: 6 ports detected
[ 1.004447] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.004474] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004537] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.004549] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.004555] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.004616] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.004674] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.004889] hub 3-0:1.0: USB hub found
[ 1.004895] hub 3-0:1.0: 2 ports detected
[ 1.004993] alloc irq_desc for 21 on node -1
[ 1.004996] alloc kstat_irqs on node -1
[ 1.005003] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.005014] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.005020] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.005080] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.005137] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.005355] hub 4-0:1.0: USB hub found
[ 1.005361] hub 4-0:1.0: 2 ports detected
[ 1.005464] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.005475] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.005481] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.005547] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.005591] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.005874] hub 5-0:1.0: USB hub found
[ 1.005882] hub 5-0:1.0: 2 ports detected
[ 1.006013] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.006027] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.006034] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.006122] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.006179] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.006471] hub 6-0:1.0: USB hub found
[ 1.006479] hub 6-0:1.0: 2 ports detected
[ 1.006606] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.006620] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.006627] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.006710] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.006766] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.007070] hub 7-0:1.0: USB hub found
[ 1.007078] hub 7-0:1.0: 2 ports detected
[ 1.007390] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.032411] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N ED01 PQ: 0 ANSI: 5
[ 1.035454] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.035567] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.035853] mice: PS/2 mouse device common for all mice
[ 1.039210] rtc_cmos 00:07: RTC can wake from S4
[ 1.039315] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.039366] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.039635] device-mapper: uevent: version 1.0.3
[ 1.039914] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.040062] device-mapper: multipath: version 1.1.1 loaded
[ 1.040068] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.040386] EISA: Probing bus 0 at eisa.0
[ 1.040405] Cannot allocate resource for EISA slot 1
[ 1.040412] Cannot allocate resource for EISA slot 2
[ 1.040418] Cannot allocate resource for EISA slot 3
[ 1.040423] Cannot allocate resource for EISA slot 4
[ 1.040429] Cannot allocate resource for EISA slot 5
[ 1.040460] EISA: Detected 0 cards.
[ 1.040688] cpuidle: using governor ladder
[ 1.040832] cpuidle: using governor menu
[ 1.041478] TCP cubic registered
[ 1.041817] NET: Registered protocol family 10
[ 1.042613] lo: Disabled Privacy Extensions
[ 1.043198] NET: Registered protocol family 17
[ 1.043326] Using IPI No-Shortcut mode
[ 1.043582] PM: Resume from disk failed.
[ 1.043611] registered taskstats version 1
[ 1.044799] Magic number: 7:496:684
[ 1.044882] mem full: hash matches
[ 1.044995] rtc_cmos 00:07: setting system clock to 2011-04-28 12:40:15 UTC (1303994415)
[ 1.045002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.045007] EDD information not available.
[ 1.049104] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.049112] Uniform CD-ROM driver Revision: 3.20
[ 1.049389] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.049531] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.061187] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.408043] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.728175] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.728206] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.778416] ata3.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133
[ 1.778423] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.792671] ata3.00: configured for UDMA/133
[ 1.792902] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 11.0 PQ: 0 ANSI: 5
[ 1.793251] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.793426] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.793536] sd 2:0:0:0: [sda] Write Protect is off
[ 1.793543] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.793588] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.793966] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.840588] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.065046] irq 23: nobody cared (try booting with the "irqpoll" option)
[ 2.065050] Pid: 0, comm: swapper Not tainted 2.6.35-29-generic-pae #51-Ubuntu
[ 2.065053] Call Trace:
[ 2.065063] [<c05f03fd>] ? printk+0x2d/0x30
[ 2.065069] [<c01b27ec>] __report_bad_irq+0x2c/0x90
[ 2.065073] [<c01b0d04>] ? handle_IRQ_event+0x44/0x150
[ 2.065077] [<c01b29ad>] note_interrupt+0x15d/0x1a0
[ 2.065081] [<c017500d>] ? sched_clock_idle_wakeup_event+0x1d/0x30
[ 2.065086] [<c01b308c>] handle_fasteoi_irq+0xac/0xe0
[ 2.065089] [<c017eef5>] ? tick_check_idle+0x95/0xc0
[ 2.065094] [<c010b49d>] handle_irq+0x1d/0x30
[ 2.065097] [<c05f974c>] do_IRQ+0x4c/0xc0
[ 2.065101] [<c0109970>] common_interrupt+0x30/0x38
[ 2.065106] [<c03cba35>] ? acpi_idle_enter_c1+0x8f/0xad
[ 2.065112] [<c04f9e1a>] cpuidle_idle_call+0x6a/0x100
[ 2.065116] [<c010830c>] cpu_idle+0x8c/0xd0
[ 2.065120] [<c05da971>] rest_init+0x71/0x80
[ 2.065125] [<c085c826>] start_kernel+0x36e/0x374
[ 2.065128] [<c085c9e9>] ? pass_all_bootoptions+0x0/0xa
[ 2.065132] [<c085c0e8>] i386_start_kernel+0xd7/0xdf
[ 2.065134] handlers:
[ 2.065135] [<c0496250>] (usb_hcd_irq+0x0/0x80)
[ 2.065140] [<c0496250>] (usb_hcd_irq+0x0/0x80)
[ 2.065144] Disabling IRQ #23
[ 2.068024] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.324052] ata4.01: failed to resume link (SControl 0)
[ 2.335333] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 2.335355] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 2.335411] Freeing unused kernel memory: 708k freed
[ 2.335791] Write protecting the kernel text: 5100k
[ 2.335853] Write protecting the kernel read-only data: 2016k
[ 2.360220] udev[74]: starting version 163
[ 2.476123] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.631899] tg3.c:v3.110 (April 9, 2010)
[ 2.631938] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.631955] tg3 0000:06:00.0: setting latency timer to 64
[ 2.735483] sdhci: Secure Digital Host Controller Interface driver
[ 2.735487] sdhci: Copyright(c) Pierre Ossman
[ 2.753818] alloc irq_desc for 22 on node -1
[ 2.753822] alloc kstat_irqs on node -1
[ 2.753832] firewire_ohci 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.836687] tg3 0000:06:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:0c:ad:17
[ 2.836692] tg3 0000:06:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 2.836696] tg3 0000:06:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.836699] tg3 0000:06:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.900038] firewire_ohci: Added fw-ohci device 0000:08:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 2.900177] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 19)
[ 2.900199] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 2.901229] sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.902699] Registered led device: mmc0::
[ 2.903782] mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA
[ 3.176042] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 3.347330] usbcore: registered new interface driver hiddev
[ 3.360869] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input4
[ 3.361107] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.1-1/input0
[ 3.361299] usbcore: registered new interface driver usbhid
[ 3.361302] usbhid: USB HID core driver
[ 3.392129] firewire_core: created device fw0: GUID 00023f7bac406ea9, S400
[ 3.572037] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 3.580998] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.609135] mmc0: new SDHC card at address 1234
[ 18.467377] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k
[ 18.541162] udev[383]: starting version 163
[ 18.615205] lp: driver loaded but no devices found
[ 18.857877] Linux agpgart interface v0.103
[ 18.982119] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 18.982628] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 19.190293] Linux video capture interface: v2.00
[ 19.205360] cfg80211: Calling CRDA to update world regulatory domain
[ 19.345719] mmcblk0: mmc0:1234 SA04G 3.68 GiB
[ 19.345845] mmcblk0: p1
[ 19.370970] r852 0000:08:06.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 19.370981] r852 0000:08:06.3: setting latency timer to 64
[ 19.375244] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[ 19.421498] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 19.428159] r852: Non dma capable device detected, dma disabled
[ 19.428173] r852: driver loaded succesfully
[ 19.441485] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input5
[ 19.441559] usbcore: registered new interface driver uvcvideo
[ 19.441562] USB Video Class driver (v0.1.0)
[ 19.442216] Bluetooth: Core ver 2.15
[ 19.442239] NET: Registered protocol family 31
[ 19.442241] Bluetooth: HCI device and connection manager initialized
[ 19.442245] Bluetooth: HCI socket layer initialized
[ 19.446245] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 19.505938] usbcore: registered new interface driver btusb
[ 19.575461] usbcore: registered new interface driver usbserial
[ 19.575510] USB Serial support registered for generic
[ 19.579776] usbcore: registered new interface driver usbserial_generic
[ 19.579781] usbserial: USB Serial Driver core
[ 19.580757] [drm] Initialized drm 1.1.0 20060810
[ 19.609471] USB Serial support registered for cp210x
[ 19.609863] cp210x 5-1:1.0: cp210x converter detected
[ 19.623103] cfg80211: World regulatory domain updated:
[ 19.623107] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.623110] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.623114] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.623117] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.623120] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.623123] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.666499] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 19.720056] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 19.751097] type=1400 audit(1303987234.204:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=697 comm="apparmor_parser"
[ 19.751946] type=1400 audit(1303987234.204:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser"
[ 19.752438] type=1400 audit(1303987234.204:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=697 comm="apparmor_parser"
[ 19.838707] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 19.838712] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 19.838796] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 19.838811] iwl3945 0000:04:00.0: setting latency timer to 64
[ 19.920053] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 19.920059] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 19.920181] alloc irq_desc for 44 on node -1
[ 19.920183] alloc kstat_irqs on node -1
[ 19.920219] iwl3945 0000:04:00.0: irq 44 for MSI/MSI-X
[ 19.944811] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.944818] i915 0000:00:02.0: setting latency timer to 64
[ 19.982574] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 19.982578] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 19.998599] alloc irq_desc for 45 on node -1
[ 19.998604] alloc kstat_irqs on node -1
[ 19.998615] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 19.998630] [drm] set up 7M of stolen space
[ 20.261257] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 20.342289] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 20.342631] [drm] initialized overlay support
[ 20.596804] usb 5-1: cp210x converter now attached to ttyUSB0
[ 20.596833] usbcore: registered new interface driver cp210x
[ 20.596836] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 20.633795] Skipping EDID probe due to cached edid
[ 20.669251] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 20.785692] checking generic (d0000000 f0000) vs hw (d0000000 10000000)
[ 20.785697] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 20.786023] Console: switching to colour dummy device 80x25
[ 21.001324] Console: switching to colour frame buffer device 160x50
[ 21.048025] fb0: inteldrmfb frame buffer device
[ 21.048027] drm: registered panic notifier
[ 21.048425] Slow work thread pool: Starting up
[ 21.048481] Slow work thread pool: Ready
[ 21.080686] acpi device:07: registered as cooling_device1
[ 21.080970] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 21.081037] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.081075] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.081853] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.081924] alloc irq_desc for 46 on node -1
[ 21.081926] alloc kstat_irqs on node -1
[ 21.081942] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 21.081978] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 21.197740] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000/0x0
[ 21.288537] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 25.562397] type=1400 audit(1303987240.012:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1064 comm="apparmor_parser"
[ 25.563434] type=1400 audit(1303987240.012:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1064 comm="apparmor_parser"
[ 25.680448] ppdev: user-space parallel port driver
[ 25.683371] type=1400 audit(1303987240.132:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1097 comm="apparmor_parser"
[ 25.712808] type=1400 audit(1303987240.164:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1104 comm="apparmor_parser"
[ 25.713661] type=1400 audit(1303987240.164:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1104 comm="apparmor_parser"
[ 25.714121] type=1400 audit(1303987240.164:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser"
[ 25.808985] type=1400 audit(1303987240.260:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1165 comm="apparmor_parser"
[ 25.857247] type=1400 audit(1303987240.308:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1165 comm="apparmor_parser"
[ 25.867423] type=1400 audit(1303987240.316:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1165 comm="apparmor_parser"
[ 25.885080] type=1400 audit(1303987240.336:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1183 comm="apparmor_parser"
[ 25.889137] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 26.009207] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.011460] alloc irq_desc for 47 on node -1
[ 26.011464] alloc kstat_irqs on node -1
[ 26.011497] tg3 0000:06:00.0: irq 47 for MSI/MSI-X
[ 26.043397] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.184188] Skipping EDID probe due to cached edid
[ 26.488178] Skipping EDID probe due to cached edid
[ 26.765285] Bluetooth: L2CAP ver 2.14
[ 26.765289] Bluetooth: L2CAP socket layer initialized
[ 26.775183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.775188] Bluetooth: BNEP filters: protocol multicast
[ 26.800168] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.800173] Bluetooth: SCO socket layer initialized
[ 26.945720] Bluetooth: RFCOMM TTY layer initialized
[ 26.945727] Bluetooth: RFCOMM socket layer initialized
[ 26.945730] Bluetooth: RFCOMM ver 1.11
[ 27.604083] Skipping EDID probe due to cached edid
[ 27.916085] Skipping EDID probe due to cached edid
[ 28.240068] Skipping EDID probe due to cached edid
[ 28.308163] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 28.314477] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 28.552052] Skipping EDID probe due to cached edid
[ 30.090765] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 30.101930] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 37.332066] Skipping EDID probe due to cached edid
[ 37.648058] Skipping EDID probe due to cached edid
[ 37.960052] Skipping EDID probe due to cached edid
[ 38.272051] Skipping EDID probe due to cached edid
[ 41.872106] Skipping EDID probe due to cached edid
[ 43.821083] wlan0: authenticate with 00:21:86:ec:d6:ec (try 1)
[ 43.823430] wlan0: authenticated
[ 43.823925] wlan0: associate with 00:21:86:ec:d6:ec (try 1)
[ 43.828050] wlan0: RX AssocResp from 00:21:86:ec:d6:ec (capab=0x431 status=0 aid=1)
[ 43.828056] wlan0: associated
[ 43.829998] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.830059] cfg80211: Calling CRDA for country: NA
[ 44.007230] padlock: VIA PadLock not detected.
[ 44.448098] Skipping EDID probe due to cached edid
[ 54.160035] wlan0: no IPv6 routers present
[ 55.444067] Skipping EDID probe due to cached edid
[ 55.756064] Skipping EDID probe due to cached edid
[ 57.536065] Skipping EDID probe due to cached edid
[ 59.378432] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 59.900062] Skipping EDID probe due to cached edid
[ 60.268062] Skipping EDID probe due to cached edid
[ 87.908058] Skipping EDID probe due to cached edid
[ 110.036066] Skipping EDID probe due to cached edid
[ 163.472075] Skipping EDID probe due to cached edid
[ 163.796093] Skipping EDID probe due to cached edid
[ 164.328177] Skipping EDID probe due to cached edid
[ 164.648075] Skipping EDID probe due to cached edid
[ 165.084137] Skipping EDID probe due to cached edid
[ 165.408075] Skipping EDID probe due to cached edid
-
AJenbo
- Admin
- Indlæg: 20878
- Tilmeldt: 15. nov 2009, 15:04
- IRC nickname: AJenbo
- Geografisk sted: Vanløse, København
Re: Ubuntu 10.10 er nok ved at blive gammel
Der mangler den første bid af loggen, du kan bruge denne kommando til at gemme det hele i en tekst fil.
Kode: Vælg alt
dmesg > ~/dmesg.txt-
Viborg
- Indlæg: 186
- Tilmeldt: 17. nov 2008, 14:30
- Geografisk sted: Aars
Re: Ubuntu 10.10 er nok ved at blive gammel
Okay, jeg prøver igen
Kode: Vælg alt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-29-generic-pae (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #51-Ubuntu SMP Fri Apr 15 18:57:47 UTC 2011 (Ubuntu 2.6.35-29.51-generic-pae 2.6.35.12)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e4000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] modified: 00000000bf6d0000 - 00000000bf6e4000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6e4000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00e00000
[ 0.000000] found SMP MP-table at [c00f72c0] f72c0
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 15000-1a000
[ 0.000000] RAMDISK: 375b0000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00a08000 - 0144763d
[ 0.000000] Move RAMDISK from 00000000375b0000 - 0000000037fef63c to 00a08000 - 0144763c
[ 0.000000] ACPI: RSDP 000f7240 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bf6d9169 0009C (v01 LENOVO TP-68 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bf6e0be0 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT bf6dab78 05FF4 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS bf6e3fc0 00040
[ 0.000000] ACPI: APIC bf6e0cd4 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET bf6e0d3c 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG bf6e0d74 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA bf6e0db0 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR bf6e0de2 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: SLIC bf6e0e08 00176 (v01 LENOVO TP-68 06040000 TBD 00000001)
[ 0.000000] ACPI: APIC bf6e0f7e 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT bf6e0fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT bf6da529 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT bf6d9e97 00692 (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT bf6d9df4 000A3 (v01 BrtRef DD01BRT 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT bf6d994a 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.000000] ACPI: SSDT bf6d96eb 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT bf6d9205 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4228MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6d0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046112
[ 0.000000] free_area_init_node: node 0, pgdat c0842d00, node_mem_map c1449020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8457 pages used for memmap
[ 0.000000] HighMem zone: 809417 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3e00000 s39872 r0 d21568 u1048576
[ 0.000000] pcpu-alloc: s39872 r0 d21568 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1035871
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-29-generic-pae root=UUID=c511c096-e932-4d5e-8dad-a5475772dfba ro vga=788 quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 26214380 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (55 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009ff65c] TEXT DATA BSS
[ 0.000000] #3 [0000a00000 - 0000a07198] BRK
[ 0.000000] #4 [00000f72d0 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f72c0 - 00000f72d0] MP-table mpf
[ 0.000000] #6 [000009f800 - 000009fd71] BIOS reserved
[ 0.000000] #7 [000009ff09 - 00000f72c0] BIOS reserved
[ 0.000000] #8 [000009fd71 - 000009ff09] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [0000a08000 - 0001448000] NEW RAMDISK
[ 0.000000] #13 [0001448000 - 0001449000] BOOTMEM
[ 0.000000] #14 [0001449000 - 0003c49000] BOOTMEM
[ 0.000000] #15 [0003c49000 - 0003c49004] BOOTMEM
[ 0.000000] #16 [0003c49040 - 0003c49100] BOOTMEM
[ 0.000000] #17 [0003c49100 - 0003c491a8] BOOTMEM
[ 0.000000] #18 [0003c491c0 - 0003c4c1c0] BOOTMEM
[ 0.000000] #19 [0003c4c1c0 - 0003c4c4dc] BOOTMEM
[ 0.000000] #20 [0003c4c500 - 0003c58500] BOOTMEM
[ 0.000000] #21 [0003c58500 - 0003c5852d] BOOTMEM
[ 0.000000] #22 [0003c58540 - 0003c5856f] BOOTMEM
[ 0.000000] #23 [0003c58580 - 0003c58808] BOOTMEM
[ 0.000000] #24 [0003c58840 - 0003c58880] BOOTMEM
[ 0.000000] #25 [0003c58880 - 0003c588c0] BOOTMEM
[ 0.000000] #26 [0003c588c0 - 0003c58900] BOOTMEM
[ 0.000000] #27 [0003c58900 - 0003c58940] BOOTMEM
[ 0.000000] #28 [0003c58940 - 0003c58980] BOOTMEM
[ 0.000000] #29 [0003c58980 - 0003c589c0] BOOTMEM
[ 0.000000] #30 [0003c589c0 - 0003c58a00] BOOTMEM
[ 0.000000] #31 [0003c58a00 - 0003c58a40] BOOTMEM
[ 0.000000] #32 [0003c58a40 - 0003c58a80] BOOTMEM
[ 0.000000] #33 [0003c58a80 - 0003c58ac0] BOOTMEM
[ 0.000000] #34 [0003c58ac0 - 0003c58b00] BOOTMEM
[ 0.000000] #35 [0003c58b00 - 0003c58b40] BOOTMEM
[ 0.000000] #36 [0003c58b40 - 0003c58b80] BOOTMEM
[ 0.000000] #37 [0003c58b80 - 0003c58bc0] BOOTMEM
[ 0.000000] #38 [0003c58bc0 - 0003c58c00] BOOTMEM
[ 0.000000] #39 [0003c58c00 - 0003c58c10] BOOTMEM
[ 0.000000] #40 [0003c58c40 - 0003c58c50] BOOTMEM
[ 0.000000] #41 [0003c58c80 - 0003c58cf6] BOOTMEM
[ 0.000000] #42 [0003c58d00 - 0003c58d76] BOOTMEM
[ 0.000000] #43 [0003e00000 - 0003e0f000] BOOTMEM
[ 0.000000] #44 [0003f00000 - 0003f0f000] BOOTMEM
[ 0.000000] #45 [0003c5ad80 - 0003c5ad84] BOOTMEM
[ 0.000000] #46 [0003c5adc0 - 0003c5adc4] BOOTMEM
[ 0.000000] #47 [0003c5ae00 - 0003c5ae08] BOOTMEM
[ 0.000000] #48 [0003c5ae40 - 0003c5ae48] BOOTMEM
[ 0.000000] #49 [0003c5ae80 - 0003c5af20] BOOTMEM
[ 0.000000] #50 [0003c5af40 - 0003c5af88] BOOTMEM
[ 0.000000] #51 [0003c5afc0 - 0003c5efc0] BOOTMEM
[ 0.000000] #52 [0003c5efc0 - 0003cdefc0] BOOTMEM
[ 0.000000] #53 [0003cdefc0 - 0003d1efc0] BOOTMEM
[ 0.000000] #54 [0003f0f000 - 000580efec] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
[ 0.000000] Memory: 4097140k/5242880k available (5097k kernel code, 87308k reserved, 2437k data, 708k init, 3271496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc085c000 - 0xc090d000 ( 708 kB)
[ 0.000000] .data : 0xc05fa46a - 0xc085b948 (2437 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05fa46a (5097 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1728.878 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.75 BogoMIPS (lpj=6915512)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004034] Security Framework initialized
[ 0.004054] AppArmor: AppArmor initialized
[ 0.004056] Yama: becoming mindful.
[ 0.004124] Mount-cache hash table entries: 512
[ 0.004284] Initializing cgroup subsys ns
[ 0.004290] Initializing cgroup subsys cpuacct
[ 0.004296] Initializing cgroup subsys memory
[ 0.004307] Initializing cgroup subsys devices
[ 0.004309] Initializing cgroup subsys freezer
[ 0.004312] Initializing cgroup subsys net_cls
[ 0.004347] mce: CPU supports 6 MCE banks
[ 0.004356] CPU0: Thermal monitoring handled by SMI
[ 0.004361] using mwait in idle threads.
[ 0.004369] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.004380] ... version: 2
[ 0.004382] ... bit width: 40
[ 0.004384] ... generic registers: 2
[ 0.004386] ... value mask: 000000ffffffffff
[ 0.004389] ... max period: 000000007fffffff
[ 0.004391] ... fixed-purpose events: 3
[ 0.004393] ... event mask: 0000000700000003
[ 0.005532] SMP alternatives: switching to UP code
[ 0.017437] ACPI: Core revision 20100428
[ 0.032012] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032018] ftrace: allocating 22410 entries in 44 pages
[ 0.036063] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076918] CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01
[ 0.080000] Brought up 1 CPUs
[ 0.080000] Total of 1 processors activated (3457.75 BogoMIPS).
[ 0.080000] devtmpfs: initialized
[ 0.080000] regulator: core version 0.5
[ 0.080000] Time: 17:13:08 Date: 04/28/11
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] EISA bus registered
[ 0.080000] ACPI: bus type pci registered
[ 0.080000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.080000] PCI: Using MMCONFIG for extended config space
[ 0.080000] PCI: Using configuration type 1 for base access
[ 0.080000] bio: create slab <bio-0> at 0
[ 0.080609] ACPI: EC: Look up EC in DSDT
[ 0.088063] ACPI: BIOS _OSI(Linux) query ignored
[ 0.112169] ACPI: Interpreter enabled
[ 0.112174] ACPI: (supports S0 S3 S4 S5)
[ 0.112201] ACPI: Using IOAPIC for interrupt routing
[ 0.160954] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.161498] ACPI: No dock devices found.
[ 0.161502] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.162298] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.163829] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.163833] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.163836] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.163839] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.163842] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.163846] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
[ 0.163849] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[ 0.163932] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
[ 0.163942] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.163948] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.163996] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
[ 0.164129] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.164204] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.164276] pci 0000:00:1a.7: reg 10: [mem 0xfc504000-0xfc5043ff]
[ 0.164349] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.164355] pci 0000:00:1a.7: PME# disabled
[ 0.164408] pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
[ 0.164479] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.164485] pci 0000:00:1b.0: PME# disabled
[ 0.164599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.164605] pci 0000:00:1c.0: PME# disabled
[ 0.164722] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.164728] pci 0000:00:1c.1: PME# disabled
[ 0.164845] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.164851] pci 0000:00:1c.2: PME# disabled
[ 0.164968] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.164974] pci 0000:00:1c.3: PME# disabled
[ 0.165049] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.165124] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.165200] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.165271] pci 0000:00:1d.7: reg 10: [mem 0xfc504400-0xfc5047ff]
[ 0.165344] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.165350] pci 0000:00:1d.7: PME# disabled
[ 0.165531] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.165538] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.165544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.165549] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.165609] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.165618] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.165627] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.165636] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.165646] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.165705] pci 0000:00:1f.2: reg 10: [io 0x1c00-0x1c07]
[ 0.165714] pci 0000:00:1f.2: reg 14: [io 0x18f4-0x18f7]
[ 0.165723] pci 0000:00:1f.2: reg 18: [io 0x18f8-0x18ff]
[ 0.165732] pci 0000:00:1f.2: reg 1c: [io 0x18f0-0x18f3]
[ 0.165742] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ef]
[ 0.165751] pci 0000:00:1f.2: reg 24: [io 0x18d0-0x18df]
[ 0.165786] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.165792] pci 0000:00:1f.2: PME# disabled
[ 0.165822] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.165851] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
[ 0.165953] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.165959] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.165965] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.165975] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.166144] pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.166389] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.166402] pci 0000:04:00.0: PME# disabled
[ 0.166473] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.166503] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.166508] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.166514] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.166524] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.166595] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.166601] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.166607] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.166617] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.166811] pci 0000:06:00.0: reg 10: [mem 0xc8000000-0xc800ffff 64bit]
[ 0.167054] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.167066] pci 0000:06:00.0: PME# disabled
[ 0.167200] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.167206] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.167212] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.167222] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.167300] pci 0000:08:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.167302] pci 0000:08:06.0: MMC cards are now supported by standard SDHCI controller
[ 0.167315] pci 0000:08:06.0: reg 10: [mem 0xfc200000-0xfc2007ff]
[ 0.167380] pci 0000:08:06.0: supports D1 D2
[ 0.167383] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167389] pci 0000:08:06.0: PME# disabled
[ 0.167429] pci 0000:08:06.1: reg 10: [mem 0xfc200800-0xfc2008ff]
[ 0.167495] pci 0000:08:06.1: supports D1 D2
[ 0.167497] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167503] pci 0000:08:06.1: PME# disabled
[ 0.167542] pci 0000:08:06.2: reg 10: [mem 0xfc201000-0xfc2010ff]
[ 0.167608] pci 0000:08:06.2: supports D1 D2
[ 0.167610] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167616] pci 0000:08:06.2: PME# disabled
[ 0.167656] pci 0000:08:06.3: reg 10: [mem 0xfc201400-0xfc2014ff]
[ 0.167722] pci 0000:08:06.3: supports D1 D2
[ 0.167725] pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167730] pci 0000:08:06.3: PME# disabled
[ 0.167793] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.167800] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.167806] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.167815] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.167821] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.167824] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.167862] pci_bus 0000:00: on NUMA node 0
[ 0.167868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.168272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.168374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.168473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.168619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.182893] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.183018] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.183140] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.183262] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.183384] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.183506] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.183629] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.183751] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.183805] HEST: Table is not found!
[ 0.183886] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.183899] vgaarb: loaded
[ 0.184086] SCSI subsystem initialized
[ 0.184148] libata version 3.00 loaded.
[ 0.184208] usbcore: registered new interface driver usbfs
[ 0.184223] usbcore: registered new interface driver hub
[ 0.184250] usbcore: registered new device driver usb
[ 0.184464] ACPI: WMI: Mapper loaded
[ 0.184466] PCI: Using ACPI for IRQ routing
[ 0.184470] PCI: pci_cache_line_size set to 64 bytes
[ 0.184610] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.184614] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.184616] reserve RAM buffer: 00000000bf6d0000 - 00000000bfffffff
[ 0.184728] NetLabel: Initializing
[ 0.184730] NetLabel: domain hash size = 128
[ 0.184732] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184746] NetLabel: unlabeled traffic allowed by default
[ 0.184783] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.184791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.184797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188025] Switching to clocksource tsc
[ 0.199686] AppArmor: AppArmor Filesystem Enabled
[ 0.199711] pnp: PnP ACPI init
[ 0.199738] ACPI: bus type pnp registered
[ 0.220143] pnp: PnP ACPI: found 10 devices
[ 0.220146] ACPI: ACPI bus type pnp unregistered
[ 0.220150] PnPBIOS: Disabled by ACPI PNP
[ 0.220166] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.220170] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.220173] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.220177] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.220180] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.220183] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.220187] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.220190] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.220197] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.220205] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.220208] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.220212] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.220215] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.220218] system 00:06: [io 0xfe00] has been reserved
[ 0.220222] system 00:06: [io 0xff00-0xff7f] has been reserved
[ 0.256465] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
[ 0.256473] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff]
[ 0.256477] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.256482] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.256489] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.256496] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.256505] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.256509] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.256516] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.256522] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.256531] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.256536] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.256543] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.256549] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.256558] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.256563] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.256570] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.256576] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.256586] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.256588] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.256595] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.256600] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.256623] alloc irq_desc for 17 on node -1
[ 0.256625] alloc kstat_irqs on node -1
[ 0.256632] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.256639] pci 0000:00:1c.0: setting latency timer to 64
[ 0.256650] alloc irq_desc for 16 on node -1
[ 0.256652] alloc kstat_irqs on node -1
[ 0.256657] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.256663] pci 0000:00:1c.1: setting latency timer to 64
[ 0.256675] alloc irq_desc for 18 on node -1
[ 0.256677] alloc kstat_irqs on node -1
[ 0.256681] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.256687] pci 0000:00:1c.2: setting latency timer to 64
[ 0.256698] alloc irq_desc for 19 on node -1
[ 0.256700] alloc kstat_irqs on node -1
[ 0.256704] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.256710] pci 0000:00:1c.3: setting latency timer to 64
[ 0.256720] pci 0000:00:1e.0: setting latency timer to 64
[ 0.256726] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.256729] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.256732] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.256734] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.256737] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.256740] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.256743] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.256746] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.256749] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.256752] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.256755] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.256757] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.256760] pci_bus 0000:06: resource 1 [mem 0xc8000000-0xc9ffffff]
[ 0.256763] pci_bus 0000:06: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.256766] pci_bus 0000:08: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.256768] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.256771] pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.256814] NET: Registered protocol family 2
[ 0.256880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.257135] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.257676] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.258031] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.258035] TCP reno registered
[ 0.258038] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.258053] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.258190] NET: Registered protocol family 1
[ 0.258215] pci 0000:00:02.0: Boot video device
[ 0.258430] PCI: CLS 64 bytes, default 64
[ 0.258532] Simple Boot Flag at 0x36 set to 0x1
[ 0.258694] cpufreq-nforce2: No nForce2 chipset.
[ 0.258729] Scanning for low memory corruption every 60 seconds
[ 0.258894] audit: initializing netlink socket (disabled)
[ 0.258909] type=2000 audit(1304010787.252:1): initialized
[ 0.272068] Trying to unpack rootfs image as initramfs...
[ 0.288266] highmem bounce pool size: 64 pages
[ 0.288273] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.293801] VFS: Disk quotas dquot_6.5.2
[ 0.293875] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.300161] fuse init (API version 7.14)
[ 0.300293] msgmni has been set to 1612
[ 0.590109] Freeing initrd memory: 10496k freed
[ 0.600114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.600119] io scheduler noop registered
[ 0.600122] io scheduler deadline registered
[ 0.600140] io scheduler cfq registered (default)
[ 0.600279] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.600337] alloc irq_desc for 40 on node -1
[ 0.600339] alloc kstat_irqs on node -1
[ 0.600354] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.600476] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.600529] alloc irq_desc for 41 on node -1
[ 0.600531] alloc kstat_irqs on node -1
[ 0.600542] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.600656] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.600709] alloc irq_desc for 42 on node -1
[ 0.600711] alloc kstat_irqs on node -1
[ 0.600721] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.600836] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.600888] alloc irq_desc for 43 on node -1
[ 0.600890] alloc kstat_irqs on node -1
[ 0.600900] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.601030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.601167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.601438] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 960k, total 960k
[ 0.601442] vesafb: mode is 800x600x16, linelength=1600, pages=0
[ 0.601444] vesafb: scrolling: redraw
[ 0.601447] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.612652] Console: switching to colour frame buffer device 100x37
[ 0.623614] fb0: VESA VGA frame buffer device
[ 0.623633] intel_idle: MWAIT substates: 0x1110
[ 0.623635] intel_idle: does not run on family 6 model 22
[ 0.623788] ACPI: AC Adapter [ACAD] (on-line)
[ 0.623873] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.623919] ACPI: Lid Switch [LID0]
[ 0.623969] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.623974] ACPI: Power Button [PWRB]
[ 0.624091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.624095] ACPI: Power Button [PWRF]
[ 0.624393] ACPI: acpi_idle registered with cpuidle
[ 0.625097] Monitor-Mwait will be used to enter C-1 state
[ 0.625127] Monitor-Mwait will be used to enter C-2 state
[ 0.625148] Monitor-Mwait will be used to enter C-3 state
[ 0.625154] Marking TSC unstable due to TSC halts in idle
[ 0.627457] Switching to clocksource hpet
[ 0.648323] ERST: Table is not found!
[ 0.648607] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.650278] brd: module loaded
[ 0.650881] loop: module loaded
[ 0.651126] ata_piix 0000:00:1f.1: version 2.13
[ 0.651141] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.651184] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.651373] scsi0 : ata_piix
[ 0.651468] isapnp: Scanning for PnP cards...
[ 0.656994] scsi1 : ata_piix
[ 0.657763] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.657767] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.657792] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.657799] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.658352] ACPI: Battery Slot [BAT1] (battery present)
[ 0.833156] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.845055] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, ED01, max UDMA/33
[ 0.888969] scsi2 : ata_piix
[ 0.889040] scsi3 : ata_piix
[ 0.890427] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 0.890436] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 0.890828] Fixed MDIO Bus: probed
[ 0.890871] PPP generic driver version 2.4.2
[ 0.890932] tun: Universal TUN/TAP device driver, 1.6
[ 0.890934] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.891031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.891056] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.891078] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.891083] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.891125] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.891166] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.895063] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.895082] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504000
[ 0.986298] isapnp: No Plug & Play device found
[ 0.986314] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.986455] hub 1-0:1.0: USB hub found
[ 0.986461] hub 1-0:1.0: 4 ports detected
[ 0.986537] alloc irq_desc for 23 on node -1
[ 0.986540] alloc kstat_irqs on node -1
[ 0.986547] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.986562] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.986566] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.986605] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.986639] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.990519] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.990537] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400
[ 0.994727] ata1.00: configured for UDMA/33
[ 1.004057] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.004196] hub 2-0:1.0: USB hub found
[ 1.004202] hub 2-0:1.0: 6 ports detected
[ 1.004287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.004303] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004343] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.004351] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.004356] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.004393] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.004436] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.004565] hub 3-0:1.0: USB hub found
[ 1.004570] hub 3-0:1.0: 2 ports detected
[ 1.004633] alloc irq_desc for 21 on node -1
[ 1.004635] alloc kstat_irqs on node -1
[ 1.004641] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.004649] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.004653] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.004688] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.004729] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.004860] hub 4-0:1.0: USB hub found
[ 1.004865] hub 4-0:1.0: 2 ports detected
[ 1.004928] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.004936] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.004940] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.004979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.005010] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.005138] hub 5-0:1.0: USB hub found
[ 1.005143] hub 5-0:1.0: 2 ports detected
[ 1.005204] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.005212] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.005216] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.005254] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.005285] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.005413] hub 6-0:1.0: USB hub found
[ 1.005418] hub 6-0:1.0: 2 ports detected
[ 1.005479] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.005487] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.005491] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.005526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.005558] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.005687] hub 7-0:1.0: USB hub found
[ 1.005692] hub 7-0:1.0: 2 ports detected
[ 1.005830] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.032159] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N ED01 PQ: 0 ANSI: 5
[ 1.034707] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.034800] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.034923] mice: PS/2 mouse device common for all mice
[ 1.035850] rtc_cmos 00:07: RTC can wake from S4
[ 1.035897] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.035932] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.036064] device-mapper: uevent: version 1.0.3
[ 1.036190] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.036245] device-mapper: multipath: version 1.1.1 loaded
[ 1.036248] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.036383] EISA: Probing bus 0 at eisa.0
[ 1.036392] Cannot allocate resource for EISA slot 1
[ 1.036396] Cannot allocate resource for EISA slot 2
[ 1.036398] Cannot allocate resource for EISA slot 3
[ 1.036400] Cannot allocate resource for EISA slot 4
[ 1.036403] Cannot allocate resource for EISA slot 5
[ 1.036419] EISA: Detected 0 cards.
[ 1.036635] cpuidle: using governor ladder
[ 1.036696] cpuidle: using governor menu
[ 1.036976] TCP cubic registered
[ 1.037124] NET: Registered protocol family 10
[ 1.037463] lo: Disabled Privacy Extensions
[ 1.037662] NET: Registered protocol family 17
[ 1.037717] Using IPI No-Shortcut mode
[ 1.037811] PM: Resume from disk failed.
[ 1.037822] registered taskstats version 1
[ 1.038438] Magic number: 7:64:240
[ 1.038539] rtc_cmos 00:07: setting system clock to 2011-04-28 17:13:09 UTC (1304010789)
[ 1.038543] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.038545] EDD information not available.
[ 1.044431] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.044435] Uniform CD-ROM driver Revision: 3.20
[ 1.044551] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.044615] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.059834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.408037] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.728115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.728135] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.780430] ata3.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133
[ 1.780434] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.796701] ata3.00: configured for UDMA/133
[ 1.796814] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 11.0 PQ: 0 ANSI: 5
[ 1.796966] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.797045] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.797099] sd 2:0:0:0: [sda] Write Protect is off
[ 1.797102] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.797127] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.797294] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.853202] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.956035] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.324052] ata4.01: failed to resume link (SControl 0)
[ 2.335330] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 2.335352] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 2.335401] Freeing unused kernel memory: 708k freed
[ 2.335782] Write protecting the kernel text: 5100k
[ 2.335844] Write protecting the kernel read-only data: 2016k
[ 2.360077] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 2.360252] udev[74]: starting version 163
[ 2.662595] sdhci: Secure Digital Host Controller Interface driver
[ 2.662598] sdhci: Copyright(c) Pierre Ossman
[ 2.710135] tg3.c:v3.110 (April 9, 2010)
[ 2.710172] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.710189] tg3 0000:06:00.0: setting latency timer to 64
[ 2.722696] alloc irq_desc for 22 on node -1
[ 2.722700] alloc kstat_irqs on node -1
[ 2.722709] firewire_ohci 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.756059] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 2.790818] usbcore: registered new interface driver hiddev
[ 2.803950] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input4
[ 2.804104] generic-usb 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.1-1/input0
[ 2.804125] usbcore: registered new interface driver usbhid
[ 2.804127] usbhid: USB HID core driver
[ 2.852785] tg3 0000:06:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:0c:ad:17
[ 2.852791] tg3 0000:06:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 2.852795] tg3 0000:06:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.852798] tg3 0000:06:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.884035] firewire_ohci: Added fw-ohci device 0000:08:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 2.884181] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 19)
[ 2.884203] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 2.885235] sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.886269] Registered led device: mmc0::
[ 2.887695] mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA
[ 3.376159] firewire_core: created device fw0: GUID 00023f7bac406ea9, S400
[ 3.505356] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 19.303307] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k
[ 19.371397] udev[379]: starting version 163
[ 19.450285] lp: driver loaded but no devices found
[ 19.812070] Linux agpgart interface v0.103
[ 19.815944] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 20.042772] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 20.215631] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 20.267232] r852 0000:08:06.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 20.267242] r852 0000:08:06.3: setting latency timer to 64
[ 20.301593] r852: Non dma capable device detected, dma disabled
[ 20.301609] r852: driver loaded succesfully
[ 20.311535] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 20.314734] cfg80211: Calling CRDA to update world regulatory domain
[ 20.348447] [drm] Initialized drm 1.1.0 20060810
[ 20.394475] cfg80211: World regulatory domain updated:
[ 20.394479] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 20.394483] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.394486] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.394490] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 20.394493] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.394496] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.481386] type=1400 audit(1304003608.937:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=726 comm="apparmor_parser"
[ 20.482236] type=1400 audit(1304003608.937:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
[ 20.482694] type=1400 audit(1304003608.937:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
[ 20.585385] Linux video capture interface: v2.00
[ 20.641785] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[ 20.647918] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input5
[ 20.648658] usbcore: registered new interface driver uvcvideo
[ 20.648662] USB Video Class driver (v0.1.0)
[ 20.706082] Bluetooth: Core ver 2.15
[ 20.706113] NET: Registered protocol family 31
[ 20.706116] Bluetooth: HCI device and connection manager initialized
[ 20.706119] Bluetooth: HCI socket layer initialized
[ 20.710231] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 20.731941] usbcore: registered new interface driver btusb
[ 20.761701] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.761708] i915 0000:00:02.0: setting latency timer to 64
[ 20.865759] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 20.865764] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 20.865843] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.865858] iwl3945 0000:04:00.0: setting latency timer to 64
[ 21.000102] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 21.000107] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 21.000228] alloc irq_desc for 44 on node -1
[ 21.000231] alloc kstat_irqs on node -1
[ 21.000266] iwl3945 0000:04:00.0: irq 44 for MSI/MSI-X
[ 21.002614] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 21.002619] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 21.008421] alloc irq_desc for 45 on node -1
[ 21.008425] alloc kstat_irqs on node -1
[ 21.008437] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 21.008451] [drm] set up 7M of stolen space
[ 21.137790] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 21.138132] [drm] initialized overlay support
[ 21.410690] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 21.428037] Skipping EDID probe due to cached edid
[ 21.538516] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 21.584928] checking generic (d0000000 f0000) vs hw (d0000000 10000000)
[ 21.584933] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 21.585259] Console: switching to colour dummy device 80x25
[ 21.778790] Console: switching to colour frame buffer device 160x50
[ 21.825484] fb0: inteldrmfb frame buffer device
[ 21.825487] drm: registered panic notifier
[ 21.826648] Slow work thread pool: Starting up
[ 21.833027] Slow work thread pool: Ready
[ 21.862001] acpi device:07: registered as cooling_device1
[ 21.862287] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 21.862360] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.862397] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.863190] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.863259] alloc irq_desc for 46 on node -1
[ 21.863262] alloc kstat_irqs on node -1
[ 21.863278] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 21.863314] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.156405] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000/0x0
[ 22.247516] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 25.521336] type=1400 audit(1304003613.977:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1108 comm="apparmor_parser"
[ 25.522369] type=1400 audit(1304003613.977:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1108 comm="apparmor_parser"
[ 25.629592] ppdev: user-space parallel port driver
[ 25.649698] type=1400 audit(1304003614.105:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1142 comm="apparmor_parser"
[ 25.670594] type=1400 audit(1304003614.125:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1145 comm="apparmor_parser"
[ 25.671446] type=1400 audit(1304003614.125:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1145 comm="apparmor_parser"
[ 25.671906] type=1400 audit(1304003614.125:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1145 comm="apparmor_parser"
[ 25.752437] type=1400 audit(1304003614.209:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1215 comm="apparmor_parser"
[ 25.824069] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 25.844357] type=1400 audit(1304003614.301:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1215 comm="apparmor_parser"
[ 25.857084] type=1400 audit(1304003614.313:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1215 comm="apparmor_parser"
[ 25.896588] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.898832] alloc irq_desc for 47 on node -1
[ 25.898836] alloc kstat_irqs on node -1
[ 25.898870] tg3 0000:06:00.0: irq 47 for MSI/MSI-X
[ 25.931055] type=1400 audit(1304003614.385:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1227 comm="apparmor_parser"
[ 25.932580] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.124181] Skipping EDID probe due to cached edid
[ 26.432102] Skipping EDID probe due to cached edid
[ 26.727419] vboxdrv: Found 1 processor cores.
[ 26.729904] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 26.729909] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
[ 27.108897] Bluetooth: L2CAP ver 2.14
[ 27.108902] Bluetooth: L2CAP socket layer initialized
[ 27.128477] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.128483] Bluetooth: BNEP filters: protocol multicast
[ 27.146666] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.146671] Bluetooth: SCO socket layer initialized
[ 27.300089] Bluetooth: RFCOMM TTY layer initialized
[ 27.300098] Bluetooth: RFCOMM socket layer initialized
[ 27.300101] Bluetooth: RFCOMM ver 1.11
[ 27.380070] Skipping EDID probe due to cached edid
[ 27.692056] Skipping EDID probe due to cached edid
[ 28.096041] Skipping EDID probe due to cached edid
[ 28.327223] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 28.331716] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 28.408070] Skipping EDID probe due to cached edid
[ 29.934223] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 29.943960] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 35.300068] Skipping EDID probe due to cached edid
[ 35.616100] Skipping EDID probe due to cached edid
[ 35.928070] Skipping EDID probe due to cached edid
[ 36.240067] Skipping EDID probe due to cached edid
[ 40.016094] Skipping EDID probe due to cached edid
[ 41.944131] wlan0: authenticate with 00:21:86:ec:d6:ec (try 1)
[ 41.946483] wlan0: authenticated
[ 41.946959] wlan0: associate with 00:21:86:ec:d6:ec (try 1)
[ 41.950607] wlan0: RX AssocResp from 00:21:86:ec:d6:ec (capab=0x431 status=0 aid=1)
[ 41.950612] wlan0: associated
[ 41.954895] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.954955] cfg80211: Calling CRDA for country: NA
[ 42.044071] Skipping EDID probe due to cached edid
[ 42.616097] Skipping EDID probe due to cached edid
[ 42.928084] Skipping EDID probe due to cached edid
[ 43.063421] padlock: VIA PadLock not detected.
[ 44.676062] Skipping EDID probe due to cached edid
[ 46.104056] Skipping EDID probe due to cached edid
[ 48.840100] Skipping EDID probe due to cached edid
[ 51.544970] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 52.784029] wlan0: no IPv6 routers present
[ 74.160493] mmc0: new SDHC card at address 1234
[ 74.187492] mmcblk0: mmc0:1234 SA04G 3.68 GiB
[ 74.189006] mmcblk0: p1-
AJenbo
- Admin
- Indlæg: 20878
- Tilmeldt: 15. nov 2009, 15:04
- IRC nickname: AJenbo
- Geografisk sted: Vanløse, København
Re: Ubuntu 10.10 er nok ved at blive gammel
Ok, jeg kan se du køre med -proposed og PAE, det gør det lidt svære for mig at lave en direkte sammenligning med min egen maskine. Jeg kan dog ikke se noget tydelig langsommere ved din, den bruger lidt ekstra tid på bluetooth og opsætning af skærment, selv har jeg dog ikke bluetooth.
Filsystemet er helt på plads efter 30sec, på min dual core 3Ghz med støre cache tager det 22sec at nå der til. Jeg tror ikke der er selve kernen der tager langtid om at starte op.
Du kan prøve at installere bootchart og pybootchartgui se om de kan kaste noget mere lys over hvad det er der tager tid, har du mulighed for at lave en ren test installation af 10.10 kunne det være godt til at sammenligne.
Filsystemet er helt på plads efter 30sec, på min dual core 3Ghz med støre cache tager det 22sec at nå der til. Jeg tror ikke der er selve kernen der tager langtid om at starte op.
Du kan prøve at installere bootchart og pybootchartgui se om de kan kaste noget mere lys over hvad det er der tager tid, har du mulighed for at lave en ren test installation af 10.10 kunne det være godt til at sammenligne.
-
Viborg
- Indlæg: 186
- Tilmeldt: 17. nov 2008, 14:30
- Geografisk sted: Aars
Re: Ubuntu 10.10 er nok ved at blive gammel
-proposed og PAE?
-
NickyThomassen
- Admin
- Indlæg: 3652
- Tilmeldt: 5. mar 2010, 19:58
- IRC nickname: nicky
- Geografisk sted: 192.168.20.42
Re: Ubuntu 10.10 er nok ved at blive gammel
PAE giver din kernel mulighed for at allokere mere end 2.7gb systemhukommelse (RAM) selvom du køre et 32bit-system og så vidt jeg kan se er en proposed kernel en som understøtter eksperimentelle funktioner (men det sidste må du ikke holde mig op på 
)
Hilsen Nicky
)Hilsen Nicky
-
AJenbo
- Admin
- Indlæg: 20878
- Tilmeldt: 15. nov 2009, 15:04
- IRC nickname: AJenbo
- Geografisk sted: Vanløse, København
Re: Ubuntu 10.10 er nok ved at blive gammel
For det mest er der tale om eksperimentelle rettelser, men er det helt rigtigt.
Du kan slå proposed fra under programmer-Ubuntu Softwarecenter-rediger-softwarekilder.
Du kan slå proposed fra under programmer-Ubuntu Softwarecenter-rediger-softwarekilder.