Kan ikke logge på trådløst netværk

[vargo]

Hej Forum

Kan i hjælpe mig med at logge min Compaq nx 7400 på mit trådløse netværk.
Den har været logget på før og Kan godt finde TDC-281A men vil ikke logge på.

Hilsen Michael

http://pastebin.com/GJU5gQpr

[AJenbo]

Det er ud til at teksten ikke er blevet lagt korrekt op på paistebin.

Åben din hjemmemappe og der efter filen netinfo, og kopier infoen der fra her ind.

[vargo]

Hjemme mappen kunne jeg godt finde men ikke net info lå der ikke
Fandt den da jeg søgte. er det denne:

Distributor ID: Ubuntu
Description: Ubuntu 10.04.1 LTS
Release: 10.04
Codename: lucid
Linux mub-laptop 2.6.32-26-generic #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 i686 GNU/Linux
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
10:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c52f Logitech, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
*-network
description: Wireless interface
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:10:00.0
logical name: eth1
version: 01
serial: 00:14:a5:aa:7a:01
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 latency=0 multicast=yes wireless=IEEE 802.11bg
resources: irq:17 memory:f4000000-f4003fff
*-network
description: Ethernet interface
product: BCM4401-B0 100Base-TX
vendor: Broadcom Corporation
physical id: e
bus info: pci@0000:02:0e.0
logical name: eth0
version: 02
serial: 00:15:60:c5:4a:1e
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=85.218.176.218 latency=64 link=yes multicast=yes port=twisted pair speed=100MB/s
resources: irq:16 memory:f4108000-f4109fff
eth0 Link encap:Ethernet HWaddr 00:15:60:c5:4a:1e
inet addr:85.218.176.218 Bcast:85.218.177.255 Mask:255.255.254.0
inet6 addr: fe80::215:60ff:fec5:4a1e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8017 errors:0 dropped:0 overruns:0 frame:0
TX packets:5281 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5841293 (5.8 MB) TX bytes:617750 (617.7 KB)
Interrupt:16

eth1 Link encap:Ethernet HWaddr 00:14:a5:aa:7a:01
inet6 addr: fe80::214:a5ff:feaa:7a01/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:29532
TX packets:20 errors:25 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2468 (2.4 KB) TX bytes:3023 (3.0 KB)
Interrupt:17

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

eth1 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:24 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm
Rx invalid nwid:0 Rx invalid crypt:2 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0


NetworkManager Tool

State: connected

- Device: eth1 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
State: disconnected
Default: no
HW Address: 00:14:A5:AA:7A:01

Capabilities:

Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes

Wireless Access Points
ZyXEL: Infra, 00:13:49:44:8A:BA, Freq 2437 MHz, Rate 0 Mb/s, Strength 80
4711: Infra, 00:1B:11:4D:26:AF, Freq 2432 MHz, Rate 0 Mb/s, Strength 80 WPA2
PEPSDK: Infra, 00:24:37:BE:69:F0, Freq 2412 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2
TDC-281A: Infra, 00:19:70:1D:3F:69, Freq 2457 MHz, Rate 54 Mb/s, Strength 100 WPA WPA2


- Device: eth0 [Automatisk ethernet] ------------------------------------------
Type: Wired
Driver: b44
State: connected
Default: yes
HW Address: 00:15:60:C5:4A:1E

Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s

Wired Properties
Carrier: on

IPv4 Settings:
Address: 85.218.176.218
Prefix: 23 (255.255.254.0)
Gateway: 85.218.176.1

DNS: 85.218.129.11
DNS: 85.218.128.141
DNS: 85.218.129.12


usb-modeswitch-data:
Installeret: (ingen)
Kandidat: 20100127-1
Versionstabel:
20100127-1 0
500 http://dk.archive.ubuntu.com/ubuntu/ lucid/universe Packages
500 http://archive.ubuntu.com/ubuntu/ lucid/universe Packages
Package: usb-modeswitch-data
Priority: extra
Section: universe/comm
Installed-Size: 456
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Didier Raboud <didier@raboud.com>
Architecture: all
Version: 20100127-1
Replaces: usb-modeswitch (<< 1.0.7-1)
Depends: udev (>= 0.140-1)
Recommends: usb-modeswitch (>= 1.1.0-1)
Conflicts: usb-modeswitch (<< 1.0.7-1)
Filename: pool/universe/u/usb-modeswitch-data/usb-modeswitch-data_20100127-1_all.deb
Size: 10228
MD5sum: a7be2d615f3114aab9c3e2135efc4a37
SHA1: 9cf8a07bd1abd6c5433e9b73df9bad1be54aaa83
SHA256: 642c0fe99849940b4846207dede25d4444646e0dc3ea4c7e0e1dc374b01377a4
Description: mode switching data for usb-modeswitch
Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the commands data needed for usb-modeswitch.
Homepage: http://www.draisberghof.de/usb_modeswitch/
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu

usb-modeswitch:
Installeret: (ingen)
Kandidat: 1.1.0-2
Versionstabel:
1.1.0-2 0
500 http://dk.archive.ubuntu.com/ubuntu/ lucid/universe Packages
500 http://archive.ubuntu.com/ubuntu/ lucid/universe Packages
Package: usb-modeswitch
Priority: extra
Section: universe/comm
Installed-Size: 136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Didier Raboud <didier@raboud.com>
Architecture: i386
Version: 1.1.0-2
Depends: libc6 (>= 2.4), libusb-0.1-4 (>= 2:0.1.12), tcl | tclsh, usb-modeswitch-data (>= 20100127-1)
Suggests: comgt, wvdial
Filename: pool/universe/u/usb-modeswitch/usb-modeswitch_1.1.0-2_i386.deb
Size: 33430
MD5sum: 74fc30cb4646b5650ea26f7c3e3bccda
SHA1: e051462fb59db639d82de0672d79717ac9aa2302
SHA256: b6823e7f18a29d3114c3220ed1f832f007dfcfc3b894b034fc4c601aa2ae46a4
Description: mode switching tool for controlling "flip flop" USB devices
Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the binaries and the brother scripts.
Homepage: http://www.draisberghof.de/usb_modeswitch/
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu

network-manager:
Installeret: 0.8-0ubuntu3
Kandidat: 0.8-0ubuntu3
Versionstabel:
*** 0.8-0ubuntu3 0
500 http://archive.ubuntu.com/ubuntu/ lucid/main Packages
100 /var/lib/dpkg/status
Package: network-manager
Priority: optional
Section: net
Installed-Size: 2236
Maintainer: Ubuntu Core Dev Team <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Riccardo Setti <giskard@debian.org>
Architecture: i386
Version: 0.8-0ubuntu3
Replaces: network-manager-pptp (<< 0.7~~)
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.23.5), libgudev-1.0-0 (>= 147), libnl1 (>= 1.1), libnm-glib2 (>= 0.8~a~git.20090826t185111.79489be), libnm-util1 (>= 0.8~a~git.20090930t162132.866d48b), libnspr4-0d (>= 4.7.0~1.9b1), libnss3-1d (>= 3.12.2~rc1), libpolkit-gobject-1-0 (>= 0.94), libudev0 (>= 147), libuuid1 (>= 2.16), upstart-job, iproute, iputils-arping, lsb-base (>= 3.2-14), wpasupplicant (>= 0.6.1~), dbus (>= 0.60), update-notifier-common, ppp
Recommends: network-manager-gnome | network-manager-kde | plasma-widget-networkmanagement, dnsmasq-base, modemmanager, iptables, network-manager-pptp
Conflicts: network-manager-pptp (<< 0.7~~)
Filename: pool/main/n/network-manager/network-manager_0.8-0ubuntu3_i386.deb
Size: 317208
MD5sum: 914cb2f4b55698dab0eabfcbbf096d36
SHA1: 94d7613f2ea0c667f2e86c7d76859c55dfb820da
SHA256: 9a0d762b2be3b1b9fe125842422b2e7e35728dbcab098aa204d3c9f7af0af5e1
Description: network management framework daemon
NetworkManager attempts to keep an active network connection available at all
times. It is intended only for the desktop use-case, and is not intended for
usage on servers. The point of NetworkManager is to make networking
configuration and setup as painless and automatic as possible. If using DHCP,
NetworkManager is _intended_ to replace default routes, obtain IP addresses
from a DHCP server, and change nameservers whenever it sees fit.
.
This package provides the userspace daemons.
.
Homepage: http://www.gnome.org/projects/NetworkManager/
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 3y
Task: ubuntu-desktop, kubuntu-desktop, kubuntu-netbook, edubuntu-desktop, edubuntu-desktop-kde, xubuntu-desktop, mythbuntu-backend-master, mythbuntu-backend-slave, mythbuntu-desktop, mythbuntu-frontend, ubuntu-netbook

Module Size Used by
michael_mic 1732 0
arc4 1153 0
binfmt_misc 6587 1
snd_hda_codec_si3054 3396 1
snd_hda_codec_analog 58598 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_intel 22005 2
snd_hda_codec 74201 3 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
pcmcia 30784 0
b44 25574 0
ssb 38902 1 b44
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
mii 4381 1 b44
i915 287426 3
lib80211_crypt_tkip 7596 0
yenta_socket 20408 1
drm_kms_helper 29329 1 i915
snd 54180 17 snd_hda_codec_si3054,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ppdev 5259 0
wl 1959598 0
rsrc_nonstatic 10015 1 yenta_socket
drm 162409 4 i915,drm_kms_helper
i2c_algo_bit 5028 1 i915
intel_agp 24375 2 i915
psmouse 63245 0
serio_raw 3978 0
joydev 8708 0
parport_pc 25962 1
pcmcia_core 32964 3 pcmcia,yenta_socket,rsrc_nonstatic
soundcore 6620 1 snd
video 17375 1 i915
agpgart 31724 2 drm,intel_agp
output 1871 1 video
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
lib80211 5046 2 lib80211_crypt_tkip,wl
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
ohci1394 26950 0
usbhid 36110 0
hid 67032 1 usbhid
ieee1394 81181 1 ohci1394
ahci 32200 2
eth1 Scan completed :
Cell 01 - Address: 00:19:70:1D:3F:69
ESSID:"TDC-281A"
Mode:Managed
Frequency:2.457 GHz (Channel 10)
Quality:4/5 Signal level:-60 dBm Noise level:-92 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD2C0050F204104A0001101044000102105700010010470010565AA94967C14C0EAA8FF349E6F59311103C000101
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Cell 02 - Address: 00:1B:11:4D:26:AF
ESSID:"4711"
Mode:Managed
Frequency:2.432 GHz (Channel 5)
Quality:4/5 Signal level:-63 dBm Noise level:-92 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Cell 03 - Address: 00:13:49:44:8A:BA
ESSID:"ZyXEL"
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality:4/5 Signal level:-60 dBm Noise level:-92 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s

[AJenbo]

Prøv følgende: højer klik på netværks ikonet og vælg håndter forbindelser, vælg trådløs, marker alle forbindelser og tryk på fjern, tryk på luk.
Prøv her efter at logge ind på dit netværk igen.

[vargo]

Intet resultat med at fjerne forbindelserne.
Når jeg klikker på mit trådløse netværk popper det op og beder om koden, og får den, står den og søger, og lidt efter beder om koden igen, det gentager sig en gang mere og den stopper med at søge.
Har også prøvet slukke og tænde for modem for at nulstille.

Glente at skrive i hjemme mappen under netværk, ligger der kun en mappe som hedder windows-netværk som ikke kan åbnes?

[zob]

Der skulle være flere metoder for at få Broadcom 4311-kortet til at fungere.

STA driver eller b43 driver - begge beskrevet her:
https://help.ubuntu.com/community/WifiD ... %20drivers

(Jeg tror jeg ville prøve b43 først, jeg synes jeg har hørt flere nævne at de havde problemer med STA).

Lidt mere omstændigt kan du alternativt bruge ndiswrapper (for at bruge windowsdrivers):
https://help.ubuntu.com/community/WifiD ... diswrapper

[vargo]

bruger pt. STA prøver b43

[zob]

Jeg ved ikke om du er nødt til at blackliste wl. Vi får se.

[vargo]

Når jeg prøver at skrive ~$ sudo apt-get install b43-fwcutter i terminal for at hente driver siger den
~$: command not found

Er det fejl 40 eller...

[zob]

Det er jeg næsten sikker på. Prøv at copy-paste kommandoen så du er sikker på at det bliver stavet korrekt. Ellers må du meget gerne komme med hele output fra terminalen også dit eget input (omtalte kommando).

[AJenbo]

Og du er sikker på det ikke bare er routeren der har ændret adgangs kode efter reset?

[vargo]

Så nu funger det, bare lidt langsomt.

driveren er skiftet til b43. STA er der stadig men ikke aktiveret.

var inde på denne side http://wireless.kernel.org/en/users/Drivers/b43#switch og fandt ud af jeg har dette net kort 14e4:4311 supported BCM4311 b/g G b43/wl

indlæste denne. sudo apt-get install b43-fwcutter samme som zob første link til bare uden ~$

kan det blive lidt hurtigere?

[AJenbo]

Så skal der nok bruge noget mere info om hvad dit netkort kan og hvad det gøre lige nu.
Kør det samme script som du gjorde før dit første indlæg og kom med de infoer som du så får denne gang.

Du kan eventuelt teste din internet forbindelse med http://speedtest.net

Har hørt om nogle netkort der går i strømspare tilstand og der kun kan køre med 1mbit, måske er det det du har.

[vargo]

http://pastebin.com/rnPDFRW2

Så fungede det.

[vargo]

Speed test:

Download 8.74 Mb/s

Upload 0.81 Mb/s

lsp Tele Danmark 3.3/5

SERVER Copenhagen distance <50 mi