Tak for din tolmodighed,
men når jeg synkroniser går den istå og giver følgende
Which entry do you want to use? [1-9] To select a side, [D]uplicate:
Og ligemeget hvad jeg taster kommer jeg ikke vidre
Klaus
HowTo synkronisere mellem Nokia telefon og Evolution.
-
- Indlæg: 34
- Tilmeldt: 1. maj 2010, 16:15
-
- Indlæg: 3105
- Tilmeldt: 16. jun 2007, 10:26
- Geografisk sted: Ikast-Herning
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
Hvad har du trykket? Jeg valgte at taste "D".fagerlund skrev:Tak for din tolmodighed,
men når jeg synkroniser går den istå og giver følgende
Which entry do you want to use? [1-9] To select a side, [D]uplicate:
Og ligemeget hvad jeg taster kommer jeg ikke vidre
Klaus
stra
stra
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
-
- Indlæg: 34
- Tilmeldt: 1. maj 2010, 16:15
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
ok så gik det
men den vil ikke afslutte
telefonen bliver ved med at køre, og der er kun overført fra telefonen og ikke omvent
klaus
men den vil ikke afslutte
telefonen bliver ved med at køre, og der er kun overført fra telefonen og ikke omvent
klaus
-
- Indlæg: 3105
- Tilmeldt: 16. jun 2007, 10:26
- Geografisk sted: Ikast-Herning
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
Prøv at give hele output fra terminal af min ser sådan udstra
Kode: Vælg alt
msynctool --sync nokia-evo
Kode: Vælg alt
strange@strange-kontor:~$ msynctool --sync nokia-evo
Synchronizing group "nokia-evo"
Member 1 of type evo2-sync just connected
received contact dsession
received event dsession
received note dsession
Member 2 of type syncml-obex-client just connected
All clients connected or error
Member 1 of type evo2-sync just sent all changes
Received an reply to our Alert
Received an reply to our Alert
Received an reply to our Alert
Going to receive 0 changes
Going to receive 0 changes
Going to receive 0 changes
Member 2 of type syncml-obex-client just sent all changes
All clients sent changes or error
Member 1 of type evo2-sync committed all changes.
Received an reply to our sync
Received an reply to our sync
Received an reply to our sync
Member 2 of type syncml-obex-client committed all changes.
All clients have written
Member 1 of type evo2-sync just disconnected
Member 2 of type syncml-obex-client just disconnected
All clients have disconnected
The sync was successful
stra
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
-
- Indlæg: 34
- Tilmeldt: 1. maj 2010, 16:15
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
</Priority>
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Ferie</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3615c40:
Entry 1:
UID: 44
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20100809T190000</Content>
</DateStarted>
<DateEnd>
<Content>20100809T200000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Telefon samling ( Lars )</Content>
</Summary>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-104@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20100809T190000</Content>
</DateStarted>
<DateEnd>
<Content>20100809T200000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Telefon samling ( Lars )</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3616750:
Entry 1:
UID: 56
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20100811T000000</Content>
</DateStarted>
<DateEnd>
<Content>20100812T000000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Børnes første skoledag</Content>
</Summary>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-105@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20100811T000000</Content>
</DateStarted>
<DateEnd>
<Content>20100812T000000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Børnes første skoledag</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3616e50:
Entry 1:
UID: 79
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20101002T000000</Content>
</DateStarted>
<DateEnd>
<Content>20101004T000000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Lave mad til Connie og Kurt, Guldbryllop</Content>
</Summary>
<Location>
<Content>Smedeby kro</Content>
</Location>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-108@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20101002T000000</Content>
</DateStarted>
<DateEnd>
<Content>20101004T000000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Lave mad til Connie og Kurt, Guldbryllop</Content>
</Summary>
<Location>
<Content>Smedeby kro</Content>
</Location>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3617550:
Entry 1:
UID: 34
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20101017T090000</Content>
</DateStarted>
<DateEnd>
<Content>20101017T170000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Stevne</Content>
</Summary>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-111@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20101017T090000</Content>
</DateStarted>
<DateEnd>
<Content>20101017T170000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Stevne</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
All conflicts have been reported
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Ferie</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3615c40:
Entry 1:
UID: 44
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20100809T190000</Content>
</DateStarted>
<DateEnd>
<Content>20100809T200000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Telefon samling ( Lars )</Content>
</Summary>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-104@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20100809T190000</Content>
</DateStarted>
<DateEnd>
<Content>20100809T200000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Telefon samling ( Lars )</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3616750:
Entry 1:
UID: 56
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20100811T000000</Content>
</DateStarted>
<DateEnd>
<Content>20100812T000000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Børnes første skoledag</Content>
</Summary>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-105@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20100811T000000</Content>
</DateStarted>
<DateEnd>
<Content>20100812T000000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MISCELLANEOUS</Category>
</Categories>
<Summary>
<Content>Børnes første skoledag</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3616e50:
Entry 1:
UID: 79
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20101002T000000</Content>
</DateStarted>
<DateEnd>
<Content>20101004T000000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Lave mad til Connie og Kurt, Guldbryllop</Content>
</Summary>
<Location>
<Content>Smedeby kro</Content>
</Location>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-108@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20101002T000000</Content>
</DateStarted>
<DateEnd>
<Content>20101004T000000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Lave mad til Connie og Kurt, Guldbryllop</Content>
</Summary>
<Location>
<Content>Smedeby kro</Content>
</Location>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT18H</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
Conflict for Mapping 0xb3617550:
Entry 1:
UID: 34
<?xml version="1.0"?>
<vcal>
<Event>
<DateStarted>
<Content>20101017T090000</Content>
</DateStarted>
<DateEnd>
<Content>20101017T170000</Content>
</DateEnd>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Priority>
<Content>0</Content>
</Priority>
<Status>
<Content>NEEDS ACTION</Content>
</Status>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Stevne</Content>
</Summary>
<UnknownNode>
<NodeName>TZ</NodeName>
<Content>+0100</Content>
</UnknownNode>
</Event>
</vcal>
Entry 2:
UID: 20100524T133833Z-1830-1000-1-111@fagerlund-laptop
<?xml version="1.0"?>
<vcal>
<Method>
<Content>PUBLISH</Content>
</Method>
<Event>
<DateStarted>
<Content>20101017T090000</Content>
</DateStarted>
<DateEnd>
<Content>20101017T170000</Content>
</DateEnd>
<Priority>
<Content>0</Content>
</Priority>
<Categories>
<Category>MEETING</Category>
</Categories>
<Summary>
<Content>Stevne</Content>
</Summary>
<DateCalendarCreated>
<Content>20100524T133833Z</Content>
</DateCalendarCreated>
<DateCreated>
<Content>20100524T133833Z</Content>
</DateCreated>
<LastModified>
<Content>20100524T133833Z</Content>
</LastModified>
<Alarm>
<AlarmAction>DISPLAY</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
<Alarm>
<AlarmAction>AUDIO</AlarmAction>
<AlarmTrigger>
<Content>-PT15M</Content>
<Value>DURATION</Value>
<Related>START</Related>
</AlarmTrigger>
</Alarm>
</Event>
</vcal>
Which entry do you want to use? [1-9] To select a side, [D]uplicate: d
Mapping duplicated
All conflicts have been reported
-
- Indlæg: 3105
- Tilmeldt: 16. jun 2007, 10:26
- Geografisk sted: Ikast-Herning
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
For mig ser det ud som om, du ikke har fået tilknyttet de rigtige grupper til din synkronisering.
Prøv at starte igen med trin 5 i guiden.
stra
Prøv at starte igen med trin 5 i guiden.
stra
stra
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
-
- Indlæg: 34
- Tilmeldt: 1. maj 2010, 16:15
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
Efter at have kørt pungt 5.
Sker der følgende
msynctool --addgroup nokia-evo
fagerlund@fagerlund-laptop:~$ msynctool --addmember nokia-evo evo2-sync
fagerlund@fagerlund-laptop:~$ msynctool --addmember nokia-evo syncml-obex-clientfagerlund@fagerlund-laptop:~$ export EDITOR=gedit && msynctool --configure nokia-evo 2
fagerlund@fagerlund-laptop:~$ msynctool --showgroup nokia-evo
Groupname: nokia-evo
Member 8: syncml-obex-client
No Configuration found: Member has not been configured
Member 5: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 4: syncml-obex-client
No Configuration found: Member has not been configured
Member 2: syncml-obex-client
Configuration : <?xml version="1.0"?>
<config>
<!-- (Only for bluetooth) The bluetooth address if the bluetooth mode is selected -->
<bluetooth_address>00:26:69:9A:A7:1B</bluetooth_address>
<!-- (Only for bluetooth) The bluetooth channel to use. `sdptool browse $MAC` to search for the correct channel -->
<bluetooth_channel>11</bluetooth_channel>
<!-- (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (you will need access to the USB raw device) to find it. -->
<interface>PC Suite</interface>
<!-- The string that the plugin will use to identify itself. Some devices need a special string here. -->
<identifier>PC Suite</identifier>
<!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->
<version>1</version>
<!-- if the plugin should use wbxml -->
<wbxml>1</wbxml>
<!-- The username to use. Leave empty to not require a username -->
<username></username>
<!-- the password for the username -->
<password></password>
<!-- sets the connection type to use. 5 means obex over usb, 2 means obex over bluetooth -->
<type>2</type>
<!-- If wbxml is enabled, defines wether the wbxml should use string tables -->
<usestringtable>1</usestringtable>
<!-- Never send ADD command, but send REPLACE (not needed normally) -->
<onlyreplace>0</onlyreplace>
<!-- Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! -->
<onlyLocaltime>0</onlyLocaltime>
<!-- Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 -->
<recvLimit>0</recvLimit>
<maxObjSize>0</maxObjSize>
<!-- The name of the contacts db. Must be the same as the phones sends -->
<contact_db>Contacts</contact_db>
<!-- The name of the calendar db. Must be the same as the phones sends -->
<calendar_db>Calendar</calendar_db>
<!-- The name of the note db. Must be the same as the phones sends -->
<note_db>Notes</note_db>
</config>
Member 1: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 6: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 7: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 3: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
fagerlund@fagerlund-laptop:~$ msynctool --sync nokia-evo
Synchronizing group "nokia-evo"
Error while synchronizing: Member has not been configured
fagerlund@fagerlund-laptop:~$
Sker der følgende
msynctool --addgroup nokia-evo
fagerlund@fagerlund-laptop:~$ msynctool --addmember nokia-evo evo2-sync
fagerlund@fagerlund-laptop:~$ msynctool --addmember nokia-evo syncml-obex-clientfagerlund@fagerlund-laptop:~$ export EDITOR=gedit && msynctool --configure nokia-evo 2
fagerlund@fagerlund-laptop:~$ msynctool --showgroup nokia-evo
Groupname: nokia-evo
Member 8: syncml-obex-client
No Configuration found: Member has not been configured
Member 5: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 4: syncml-obex-client
No Configuration found: Member has not been configured
Member 2: syncml-obex-client
Configuration : <?xml version="1.0"?>
<config>
<!-- (Only for bluetooth) The bluetooth address if the bluetooth mode is selected -->
<bluetooth_address>00:26:69:9A:A7:1B</bluetooth_address>
<!-- (Only for bluetooth) The bluetooth channel to use. `sdptool browse $MAC` to search for the correct channel -->
<bluetooth_channel>11</bluetooth_channel>
<!-- (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (you will need access to the USB raw device) to find it. -->
<interface>PC Suite</interface>
<!-- The string that the plugin will use to identify itself. Some devices need a special string here. -->
<identifier>PC Suite</identifier>
<!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->
<version>1</version>
<!-- if the plugin should use wbxml -->
<wbxml>1</wbxml>
<!-- The username to use. Leave empty to not require a username -->
<username></username>
<!-- the password for the username -->
<password></password>
<!-- sets the connection type to use. 5 means obex over usb, 2 means obex over bluetooth -->
<type>2</type>
<!-- If wbxml is enabled, defines wether the wbxml should use string tables -->
<usestringtable>1</usestringtable>
<!-- Never send ADD command, but send REPLACE (not needed normally) -->
<onlyreplace>0</onlyreplace>
<!-- Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! -->
<onlyLocaltime>0</onlyLocaltime>
<!-- Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 -->
<recvLimit>0</recvLimit>
<maxObjSize>0</maxObjSize>
<!-- The name of the contacts db. Must be the same as the phones sends -->
<contact_db>Contacts</contact_db>
<!-- The name of the calendar db. Must be the same as the phones sends -->
<calendar_db>Calendar</calendar_db>
<!-- The name of the note db. Must be the same as the phones sends -->
<note_db>Notes</note_db>
</config>
Member 1: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 6: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 7: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
Member 3: evo2-sync
Configuration : <config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
fagerlund@fagerlund-laptop:~$ msynctool --sync nokia-evo
Synchronizing group "nokia-evo"
Error while synchronizing: Member has not been configured
fagerlund@fagerlund-laptop:~$
-
- Indlæg: 3105
- Tilmeldt: 16. jun 2007, 10:26
- Geografisk sted: Ikast-Herning
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
JA, ja vi nærmer os. Du har temmelig mange medlemmer af gruppen, og 2 af dem er ikke konfigureret, og den vil derfor ikke køre.
Medlem 1,3,5,7 og 6 er evolution. Medlem 2 er rigtig konfigureret og medlem 4 og 8 er ikke konfigureret.
Altså skal vi have de overflødige væk.
Åbn terminal og installer multisync-guiDu finder den bagefter under Programmer/tilbehør og du skulle nu kunne fjerne alle medlemmer på nær 1 og 2.
stra
Virker det ikke, kan du fjerne hele gruppen via terminalog derefter starte med trin 5 igen og følge den slavisk.
Medlem 1,3,5,7 og 6 er evolution. Medlem 2 er rigtig konfigureret og medlem 4 og 8 er ikke konfigureret.
Altså skal vi have de overflødige væk.
Åbn terminal og installer multisync-gui
Kode: Vælg alt
sudo aptitude install multisync0.90
stra
Virker det ikke, kan du fjerne hele gruppen via terminal
Kode: Vælg alt
msynctool --delgroup nokia-evo
stra
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
-
- Indlæg: 34
- Tilmeldt: 1. maj 2010, 16:15
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
Stra skrev:
Virker det ikke, kan du fjerne hele gruppen via terminalog derefter starte med trin 5 igen og følge den slavisk.Kode: Vælg alt
msynctool --delgroup nokia-evo
Har slettet og kørt pungt 5 slavisk
og fik dette resultat
fagerlund@fagerlund-laptop:~$ msynctool --sync nokia-evo
Synchronizing group "nokia-evo"
Member 2 of type syncml-obex-client had an error while connecting: Bluetooth connect error
Member 1 of type evo2-sync just connected
Member 1 of type evo2-sync just disconnected
All clients have disconnected
The sync failed: Unable to connect one of the members
Error while synchronizing: Unable to connect one of the members
fagerlund@fagerlund-laptop:~$
Klaus
-
- Indlæg: 3105
- Tilmeldt: 16. jun 2007, 10:26
- Geografisk sted: Ikast-Herning
Re: HowTo synkronisere mellem Nokia telefon og Evolution.
Dette kan skyldes 2 tingfagerlund skrev:Member 2 of type syncml-obex-client had an error while connecting: Bluetooth connect error
Klaus
1. din bluetooth forbindelse er ikke aktiv (PC eller Telefon)
2. den Bluetooth adresse, du fik med denne kommando
Kode: Vælg alt
sudo hcitool scan
Kode: Vælg alt
export EDITOR=gedit && msynctool --configure nokia-evo 2
stra
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10
Bruger Ubuntu 22.04 og 22.10 + lubuntu 22.10