eSATA harddisk virker ikke

[neglesaks]

Jeg har nogle Western Digital eksterne diske jeg prøver at koble til min linux-box, med bundkort ASUS P5B SE. Jeg kan ikke få Ubuntu til at acceptere diskene. Systemloggen viser følgende:


***

Dec 4 21:40:22 Titan6 kernel: [196148.607662] ata9: hard resetting link
Dec 4 21:40:29 Titan6 kernel: [196155.544510] ata9: link is slow to respond, please be patient (ready=0)
Dec 4 21:40:32 Titan6 kernel: [196158.632543] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 4 21:40:32 Titan6 kernel: [196158.632548] ata9: link online but device misclassified, retrying
Dec 4 21:40:32 Titan6 kernel: [196158.632550] ata9: hard resetting link
Dec 4 21:40:35 Titan6 kernel: [196162.096525] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 4 21:40:35 Titan6 kernel: [196162.235431] ata9.00: ATA-6: WD My Book, 01.01A01, max UDMA/133
Dec 4 21:40:35 Titan6 kernel: [196162.235436] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 1)
Dec 4 21:40:36 Titan6 kernel: [196162.407620] ata9.00: configured for UDMA/133
Dec 4 21:40:36 Titan6 kernel: [196162.407631] ata9: EH complete
Dec 4 21:40:36 Titan6 kernel: [196162.407710] scsi 8:0:0:0: Direct-Access ATA WD My Book 01.0 PQ: 0 ANSI: 5
Dec 4 21:40:36 Titan6 kernel: [196162.408986] sd 8:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Dec 4 21:40:36 Titan6 kernel: [196162.408999] sd 8:0:0:0: [sdd] Write Protect is off
Dec 4 21:40:36 Titan6 kernel: [196162.409020] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 4 21:40:36 Titan6 kernel: [196162.409077] sd 8:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Dec 4 21:40:36 Titan6 kernel: [196162.409087] sd 8:0:0:0: [sdd] Write Protect is off
Dec 4 21:40:36 Titan6 kernel: [196162.409108] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 4 21:40:36 Titan6 kernel: [196162.409111] sdd: [mac] sdd1 sdd2 sdd3 sdd4
Dec 4 21:40:36 Titan6 kernel: [196162.443859] sd 8:0:0:0: [sdd] Attached SCSI disk
Dec 4 21:40:36 Titan6 kernel: [196162.443964] sd 8:0:0:0: Attached scsi generic sg4 type 0
Dec 4 21:40:36 Titan6 kernel: [196162.722613] ata9: hard resetting link
Dec 4 21:40:36 Titan6 kernel: [196163.044528] ata9: SATA link down (SStatus 0 SControl 300)
Dec 4 21:40:41 Titan6 kernel: [196168.044013] ata9: hard resetting link
Dec 4 21:40:42 Titan6 kernel: [196168.364532] ata9: SATA link down (SStatus 0 SControl 300)
Dec 4 21:40:47 Titan6 kernel: [196173.364511] ata9: hard resetting link
Dec 4 21:40:47 Titan6 kernel: [196173.684527] ata9: SATA link down (SStatus 0 SControl 300)
Dec 4 21:40:47 Titan6 kernel: [196173.684537] ata9.00: disabled
Dec 4 21:40:47 Titan6 kernel: [196173.684552] sd 8:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Dec 4 21:40:47 Titan6 kernel: [196173.684555] sd 8:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor]
Dec 4 21:40:47 Titan6 kernel: [196173.684560] Descriptor sense data with sense descriptors (in hex):
Dec 4 21:40:47 Titan6 kernel: [196173.684562] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Dec 4 21:40:47 Titan6 kernel: [196173.684571] 74 70 6d 70
Dec 4 21:40:47 Titan6 kernel: [196173.684575] sd 8:0:0:0: [sdd] Add. Sense: No additional sense information
Dec 4 21:40:47 Titan6 kernel: [196173.684598] ata9: EH complete
Dec 4 21:40:47 Titan6 kernel: [196173.684617] ata9.00: detaching (SCSI 8:0:0:0)
Dec 4 21:40:47 Titan6 kernel: [196173.686649] sd 8:0:0:0: [sdd] Synchronizing SCSI cache
Dec 4 21:40:47 Titan6 kernel: [196173.686680] sd 8:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
Dec 4 21:40:47 Titan6 kernel: [196173.686683] sd 8:0:0:0: [sdd] Stopping disk
Dec 4 21:40:47 Titan6 kernel: [196173.686692] sd 8:0:0:0: [sdd] START_STOP FAILED
Dec 4 21:40:47 Titan6 kernel: [196173.686694] sd 8:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK


***

Min ubuntu er e 8.10 med seneste opdateringe, inkl. propåosed og backports.

Nogle forslag til hvor problemet kan ligge?

[Troels]

Kan du se den i gParted eller Parted?

[lath]

1)
Er du helt sikker på at at eSATA stikket inde i computeren er forbundet med et SATA stik?

2)
Hvis den er forbundet kan SMART monitoringsværktøjet snakke med harddiskens SMART elektronik, som kan oplyse om hvor godt harddisken har det.
Pakken installeres med:

Kode: Vælg alt

sudo apt-get install smartmontools

i en terminal, eller du kan installere

smartmontools

med for eksempel Synaptic, som du finder i System | Administration - menuen. (Brug Søg-knappen til hurtig at finde pakken)

3)
Du kan også installere smart-notifier pakken for grafiske meddelser, når din harddisk begynder at blive syg.

4)
Du skal bruge

Kode: Vælg alt

smartctl

terminal-programmet