Opstart af Windows i VirtualBox fejler jævnligt efter softwareopdatering

[marie@idiomatic]

Jeg har kørt en Windows 7 i VirtualBox siden maj. For det meste fungerer det fint, men en gang imellem vil den virtuelle maskine ikke starte. Det sker altid efter at jeg har ladet Ubuntu hente og installere opdateringer. Jeg får så følgende meddelelser:

VirtualBox - Error in suplibOsInit

Kode: Vælg alt

Kernel driver not installed (rc=-1908)

The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing

'/sbin/vboxconfig'

as root.

where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT. 

Og denne her:

VirtualBox - Fejl

Kode: Vælg alt

Kunne ikke åbne en session til den virtuelle maskine windows 7.

The virtual machine 'windows 7' has terminated unexpectedly during startup with exit code 1 (0x1).

Retur kode: NS_ERROR_FAILURE (0x80004005)
Komponent: MachineWrap
Kort: IMachine {b2547866-a0a1-4391-8b86-6952d82efaa0}

Når jeg kører

Kode: Vælg alt

sudo /sbin/vboxconfig

får jeg normalt at vide at der mangler en eller to pakker som jeg først skal installere (kan desværre ikke huske hvad de hedder). Når jeg har gjort dét, kan jeg så køre sbin/vboxconfig igen, og derefter virker tingene som de plejer, indtil næste gang. Sådan plejer det at være. Men i dag får jeg ikke besked om at jeg skal installere nogen pakker. I stedet får jeg følgende i terminalen:

Kode: Vælg alt

vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
vboxdrv.sh: failed: modprobe vboxdrv failed. Please use 'dmesg' to find out why.

There were problems setting up VirtualBox.  To re-start the set-up process, run
  /sbin/vboxconfig
as root.

Så denne gang ved jeg faktisk ikke hvordan jeg skal komme videre.

dmesg giver følgende voldsomt lange output, som jeg lige må dele op i to for at kunne poste det her:

Kode: Vælg alt

[    0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=2eedde28-6f6d-45a1-b477-58b6f208fba6 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000061c46fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000061c47000-0x0000000061c47fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000061c48000-0x0000000061c48fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000061c49000-0x0000000063177fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000063178000-0x0000000064277fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000064278000-0x000000007a48dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a48e000-0x000000007ae7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cefe000-0x000000007cefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ceff000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x617b4018-0x617dd057] usable ==> usable
[    0.000000] e820: update [mem 0x617a3018-0x617b3057] usable ==> usable
[    0.000000] e820: update [mem 0x61794018-0x617a2057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000061794017] usable
[    0.000000] reserve setup_data: [mem 0x0000000061794018-0x00000000617a2057] usable
[    0.000000] reserve setup_data: [mem 0x00000000617a2058-0x00000000617a3017] usable
[    0.000000] reserve setup_data: [mem 0x00000000617a3018-0x00000000617b3057] usable
[    0.000000] reserve setup_data: [mem 0x00000000617b3058-0x00000000617b4017] usable
[    0.000000] reserve setup_data: [mem 0x00000000617b4018-0x00000000617dd057] usable
[    0.000000] reserve setup_data: [mem 0x00000000617dd058-0x0000000061c46fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000061c47000-0x0000000061c47fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000061c48000-0x0000000061c48fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000061c49000-0x0000000063177fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000063178000-0x0000000064277fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000064278000-0x000000007a48dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000007a48e000-0x000000007ae7dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007cefe000-0x000000007cefefff] usable
[    0.000000] reserve setup_data: [mem 0x000000007ceff000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7cefd014  SMBIOS=0x7a702000  SMBIOS 3.0=0x7a700000  ESRT=0x7a6fedd8  PROP=0x61c43bb8 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 80WK/Provence-5R1, BIOS 4KCN24WW 02/17/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ceff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007a6fedd8 to 0x000000007a6fee88.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9e0200098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x475028000, 0x475028fff] PGTABLE
[    0.000000] BRK [0x475029000, 0x475029fff] PGTABLE
[    0.000000] BRK [0x47502a000, 0x47502afff] PGTABLE
[    0.000000] BRK [0x47502b000, 0x47502bfff] PGTABLE
[    0.000000] BRK [0x47502c000, 0x47502cfff] PGTABLE
[    0.000000] BRK [0x47502d000, 0x47502dfff] PGTABLE
[    0.000000] BRK [0x47502e000, 0x47502efff] PGTABLE
[    0.000000] BRK [0x47502f000, 0x47502ffff] PGTABLE
[    0.000000] BRK [0x475030000, 0x475030fff] PGTABLE
[    0.000000] BRK [0x475031000, 0x475031fff] PGTABLE
[    0.000000] BRK [0x475032000, 0x475032fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3d81d000-0x3fffafff]
[    0.000000] Secure boot enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007CEFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007CECC188 00010C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007CEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007CED5000 015BEC (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007CE5B000 000040
[    0.000000] ACPI: UEFI 0x000000007CEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007CEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000007CEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF9000 0004C8 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000007CEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF3000 0030A0 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000007CEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000007CEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000007CEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007CEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000007CEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007CEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007CEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000007CED4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000007CED3000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CED2000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CED1000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CECD000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CECB000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007CECA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000007CEC9000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC8000 0002AF (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC7000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC2000 00497E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000007CEC1000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007CEC0000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000007CEBF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47efd5000-0x47effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000061c46fff]
[    0.000000]   node   0: [mem 0x0000000061c49000-0x0000000063177fff]
[    0.000000]   node   0: [mem 0x0000000064278000-0x000000007a48dfff]
[    0.000000]   node   0: [mem 0x000000007cefe000-0x000000007cefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[    0.000000] On node 0 totalpages: 4162345
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7695 pages used for memmap
[    0.000000]   DMA32 zone: 492429 pages, LIFO batch:31
[    0.000000]   Normal zone: 57280 pages used for memmap
[    0.000000]   Normal zone: 3665920 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x61794000-0x61794fff]
[    0.000000] PM: Registered nosave memory: [mem 0x617a2000-0x617a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x617a3000-0x617a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x617b3000-0x617b3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x617b4000-0x617b4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x617dd000-0x617ddfff]
[    0.000000] PM: Registered nosave memory: [mem 0x61c47000-0x61c47fff]
[    0.000000] PM: Registered nosave memory: [mem 0x61c48000-0x61c48fff]
[    0.000000] PM: Registered nosave memory: [mem 0x63178000-0x64277fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a48e000-0x7ae7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae7e000-0x7ce7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ce7e000-0x7cefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ceff000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9e067ec00000 s107992 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4097285
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=2eedde28-6f6d-45a1-b477-58b6f208fba6 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16202936K/16649380K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 446444K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:524544 nr_irqs:2048 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=11232000)
[    0.000023] pid_max: default: 32768 minimum: 301
[    0.000031] ACPI: Core revision 20160930
[    0.023821] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.027045] Security Framework initialized
[    0.027046] Yama: becoming mindful.
[    0.027061] AppArmor: AppArmor initialized
[    0.027742] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.030285] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.031385] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.031396] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.031618] CPU: Physical Processor ID: 0
[    0.031618] CPU: Processor Core ID: 0
[    0.031623] mce: CPU supports 10 MCE banks
[    0.031631] CPU0: Thermal monitoring enabled (TM1)
[    0.031649] process: using mwait in idle threads
[    0.031651] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.031651] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.031740] Freeing SMP alternatives memory: 32K
[    0.037940] ftrace: allocating 34206 entries in 134 pages
[    0.051633] smpboot: Max logical packages: 2
[    0.051643] DMAR: Host address width 39
[    0.051644] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.051648] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.051648] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.051651] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.051652] DMAR: RMRR base: 0x0000007ad52000 end: 0x0000007ad71fff
[    0.051653] DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[    0.051654] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.051654] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.051655] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.053063] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.053064] x2apic enabled
[    0.053074] Switched APIC routing to cluster x2apic.
[    0.057084] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.096775] TSC deadline timer enabled
[    0.096780] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.096818] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.096842] ... version:                4
[    0.096842] ... bit width:              48
[    0.096843] ... generic registers:      4
[    0.096843] ... value mask:             0000ffffffffffff
[    0.096844] ... max period:             00007fffffffffff
[    0.096844] ... fixed-purpose events:   3
[    0.096844] ... event mask:             000000070000000f
[    0.097571] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.097581] smp: Bringing up secondary CPUs ...
[    0.097636] x86: Booting SMP configuration:
[    0.097637] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.100799] smp: Brought up 1 node, 8 CPUs
[    0.100800] smpboot: Total of 8 processors activated (44928.00 BogoMIPS)
[    0.107915] devtmpfs: initialized
[    0.107959] x86/mm: Memory block size: 128MB
[    0.110295] evm: security.selinux
[    0.110295] evm: security.SMACK64
[    0.110295] evm: security.SMACK64EXEC
[    0.110296] evm: security.SMACK64TRANSMUTE
[    0.110296] evm: security.SMACK64MMAP
[    0.110296] evm: security.ima
[    0.110297] evm: security.capability
[    0.110344] PM: Registering ACPI NVS region [mem 0x61c47000-0x61c47fff] (4096 bytes)
[    0.110345] PM: Registering ACPI NVS region [mem 0x63178000-0x64277fff] (17825792 bytes)
[    0.110521] PM: Registering ACPI NVS region [mem 0x7ae7e000-0x7ce7dfff] (33554432 bytes)
[    0.110900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.110909] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.110953] pinctrl core: initialized pinctrl subsystem
[    0.111102] RTC time: 18:19:04, date: 08/01/17
[    0.111178] NET: Registered protocol family 16
[    0.123538] cpuidle: using governor ladder
[    0.139550] cpuidle: using governor menu
[    0.139553] PCCT header not found.
[    0.139688] Simple Boot Flag at 0x44 set to 0x1
[    0.139703] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.139704] ACPI: bus type PCI registered
[    0.139705] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.139754] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.139779] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.139787] PCI: Using configuration type 1 for base access
[    0.155736] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.155737] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.155939] ACPI: Added _OSI(Module Device)
[    0.155940] ACPI: Added _OSI(Processor Device)
[    0.155940] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.155941] ACPI: Added _OSI(Processor Aggregator Device)
[    0.156927] ACPI: Executed 27 blocks of module-level executable AML code
[    0.162654] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.167781] ACPI: Dynamic OEM Table Load:
[    0.167879] ACPI: SSDT 0xFFFF9E067C3A9000 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.167999] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168059] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.168785] ACPI: Dynamic OEM Table Load:
[    0.168793] ACPI: SSDT 0xFFFF9E067B8C2800 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.168888] ACPI: Executed 1 blocks of module-level executable AML code
[    0.169202] ACPI: Dynamic OEM Table Load:
[    0.169209] ACPI: SSDT 0xFFFF9E067BC7B000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.169471] ACPI: Executed 1 blocks of module-level executable AML code
[    0.169625] ACPI: Dynamic OEM Table Load:
[    0.169631] ACPI: SSDT 0xFFFF9E067B869600 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.169727] ACPI: Executed 1 blocks of module-level executable AML code
[    0.171634] ACPI : EC: EC started
[    0.171634] ACPI : EC: interrupt blocked
[    0.171835] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.171837] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.171838] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.171838] ACPI: Interpreter enabled
[    0.171878] ACPI: (supports S0 S3 S4 S5)
[    0.171878] ACPI: Using IOAPIC for interrupt routing
[    0.171909] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.172390] ACPI: Power Resource [PG00] (on)
[    0.185368] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.185372] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.187643] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.187643] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.189315] PCI host bridge to bus 0000:00
[    0.189316] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.189317] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.189318] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.189319] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.189319] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.189320] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.189321] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.189321] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.189322] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.189323] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.189324] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.189324] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.189325] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.189326] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.189332] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.190050] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.190084] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.190798] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.190806] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    0.190811] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.190814] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.191591] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.191608] pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit]
[    0.191667] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.192409] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.192440] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.192456] pci 0000:00:14.2: reg 0x10: [mem 0xa442a000-0xa442afff 64bit]
[    0.193214] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.193234] pci 0000:00:16.0: reg 0x10: [mem 0xa442b000-0xa442bfff 64bit]
[    0.193300] pci 0000:00:16.0: PME# supported from D3hot
[    0.194033] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.194046] pci 0000:00:17.0: reg 0x10: [mem 0xa4428000-0xa4429fff]
[    0.194052] pci 0000:00:17.0: reg 0x14: [mem 0xa442e000-0xa442e0ff]
[    0.194058] pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
[    0.194064] pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
[    0.194071] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.194077] pci 0000:00:17.0: reg 0x24: [mem 0xa442c000-0xa442c7ff]
[    0.194112] pci 0000:00:17.0: PME# supported from D3hot
[    0.194836] pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
[    0.194890] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.195606] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.195636] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.195690] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.196399] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.196426] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.196479] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.197184] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.197225] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.197279] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.197987] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.198041] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    0.198845] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.198856] pci 0000:00:1f.2: reg 0x10: [mem 0xa4424000-0xa4427fff]
[    0.199619] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.199640] pci 0000:00:1f.3: reg 0x10: [mem 0xa4420000-0xa4423fff 64bit]
[    0.199670] pci 0000:00:1f.3: reg 0x20: [mem 0xa4410000-0xa441ffff 64bit]
[    0.199716] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.200453] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.200486] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.200533] pci 0000:00:1f.4: reg 0x10: [mem 0xa442d000-0xa442d0ff 64bit]
[    0.200601] pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
[    0.201416] pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030200
[    0.201424] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    0.201431] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.201438] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.201443] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.201448] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.211612] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.211618] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.211623] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
[    0.211630] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.213407] pci 0000:02:00.0: [1217:8621] type 00 class 0x080501
[    0.213424] pci 0000:02:00.0: reg 0x10: [mem 0xa4301000-0xa4301fff]
[    0.213435] pci 0000:02:00.0: reg 0x14: [mem 0xa4300000-0xa43007ff]
[    0.213547] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.213596] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.225316] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.225320] pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
[    0.225649] pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
[    0.225683] pci 0000:03:00.0: reg 0x10: [mem 0xa4200000-0xa4201fff 64bit]
[    0.225902] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.226016] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.236186] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.236189] pci 0000:00:1c.2:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.236240] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.236257] pci 0000:04:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.236281] pci 0000:04:00.0: reg 0x18: [mem 0xa4104000-0xa4104fff 64bit]
[    0.236296] pci 0000:04:00.0: reg 0x20: [mem 0xa4100000-0xa4103fff 64bit]
[    0.236381] pci 0000:04:00.0: supports D1 D2
[    0.236381] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.236435] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.247647] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.247652] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.247658] pci 0000:00:1c.3:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.247745] pci 0000:05:00.0: [144d:a804] type 00 class 0x010802
[    0.247761] pci 0000:05:00.0: reg 0x10: [mem 0xa4000000-0xa4003fff 64bit]
[    0.247891] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.259657] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.259665] pci 0000:00:1d.0:   bridge window [mem 0xa4000000-0xa40fffff]

(... fortsættes ...)

[marie@idiomatic]

Output af dmesg, fortsat:

Kode: Vælg alt

[    0.260743] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.260783] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.260822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.260861] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.260899] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.260937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.260975] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.261013] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.261241] platform MSFT0101:00: failed to claim resource 1
[    0.261245] acpi MSFT0101:00: platform device creation failed: -16
[    0.261351] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.261455] ACPI : EC: interrupt unblocked
[    0.261467] ACPI : EC: event unblocked
[    0.261478] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.261479] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.261729] SCSI subsystem initialized
[    0.261752] libata version 3.00 loaded.
[    0.261775] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.261776] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.261779] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.261779] vgaarb: loaded
[    0.261791] ACPI: bus type USB registered
[    0.261802] usbcore: registered new interface driver usbfs
[    0.261807] usbcore: registered new interface driver hub
[    0.261822] usbcore: registered new device driver usb
[    0.261880] Registered efivars operations
[    0.294415] PCI: Using ACPI for IRQ routing
[    0.322249] PCI: pci_cache_line_size set to 64 bytes
[    0.326210] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.326211] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.326211] e820: reserve RAM buffer [mem 0x61794018-0x63ffffff]
[    0.326212] e820: reserve RAM buffer [mem 0x617a3018-0x63ffffff]
[    0.326213] e820: reserve RAM buffer [mem 0x617b4018-0x63ffffff]
[    0.326214] e820: reserve RAM buffer [mem 0x61c47000-0x63ffffff]
[    0.326214] e820: reserve RAM buffer [mem 0x63178000-0x63ffffff]
[    0.326215] e820: reserve RAM buffer [mem 0x7a48e000-0x7bffffff]
[    0.326216] e820: reserve RAM buffer [mem 0x7ceff000-0x7fffffff]
[    0.326216] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[    0.326289] NetLabel: Initializing
[    0.326290] NetLabel:  domain hash size = 128
[    0.326290] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.326301] NetLabel:  unlabeled traffic allowed by default
[    0.326402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.326406] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.328449] clocksource: Switched to clocksource hpet
[    0.334025] VFS: Disk quotas dquot_6.6.0
[    0.334037] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.334106] AppArmor: AppArmor Filesystem Enabled
[    0.334136] pnp: PnP ACPI init
[    0.334243] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.334245] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.334246] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.334247] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.334248] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.334248] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.334249] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.334252] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334506] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.334508] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334659] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.334660] system 00:02: [io  0xffff] has been reserved
[    0.334661] system 00:02: [io  0xffff] has been reserved
[    0.334662] system 00:02: [io  0xffff] has been reserved
[    0.334663] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.334664] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.334665] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334742] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.334743] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.334764] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.334793] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.334794] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.334822] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.334840] pnp 00:07: Plug and Play ACPI device, IDs ETD067c PNP0f03 (active)
[    0.335663] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336073] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.336074] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.336075] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.336076] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.336077] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.336078] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.336079] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.336080] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.336081] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.336082] system 00:09: [mem 0x80000000-0x8001ffff] has been reserved
[    0.336083] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336302] pnp: PnP ACPI: found 10 devices
[    0.342953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.342956] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.342982] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.342983] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.342984] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.342985] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.342988] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
[    0.342989] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.342992] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.342995] pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
[    0.343000] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.343003] pci 0000:00:1c.2:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.343008] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.343009] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.343012] pci 0000:00:1c.3:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.343016] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.343019] pci 0000:00:1d.0:   bridge window [mem 0xa4000000-0xa40fffff]
[    0.343025] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.343026] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.343026] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.343027] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.343028] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.343029] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.343029] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.343030] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.343031] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.343032] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.343032] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.343033] pci_bus 0000:00: resource 15 [mem 0x80000000-0xdfffffff window]
[    0.343034] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.343035] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.343035] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa3ffffff]
[    0.343036] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.343037] pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
[    0.343038] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.343039] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.343039] pci_bus 0000:04: resource 1 [mem 0xa4100000-0xa41fffff]
[    0.343040] pci_bus 0000:05: resource 1 [mem 0xa4000000-0xa40fffff]
[    0.343147] NET: Registered protocol family 2
[    0.343282] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.343430] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.343511] TCP: Hash tables configured (established 131072 bind 65536)
[    0.343530] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.343564] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.343612] NET: Registered protocol family 1
[    0.343622] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.348995] PCI: CLS 64 bytes, default 64
[    0.349025] Unpacking initramfs...
[    0.876609] Freeing initrd memory: 40824K
[    0.876632] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.876634] software IO TLB [mem 0x75f23000-0x79f23000] (64MB) mapped at [ffff9e0275f23000-ffff9e0279f22fff]
[    0.876659] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.876832] Scanning for low memory corruption every 60 seconds
[    0.877137] audit: initializing netlink subsys (disabled)
[    0.877199] audit: type=2000 audit(1501611544.872:1): initialized
[    0.877468] Initialise system trusted keyrings
[    0.877570] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.878649] zbud: loaded
[    0.879000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.879169] fuse init (API version 7.26)
[    0.881726] Key type asymmetric registered
[    0.881726] Asymmetric key parser 'x509' registered
[    0.881758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.881804] io scheduler noop registered
[    0.881805] io scheduler deadline registered
[    0.881810] io scheduler cfq registered (default)
[    0.882840] pcieport 0000:00:1c.0: AER enabled with IRQ 123
[    0.882859] pcieport 0000:00:1d.0: AER enabled with IRQ 126
[    0.882872] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[    0.882880] pcieport 0000:00:1c.0: Signaling PME with IRQ 123
[    0.882891] pcieport 0000:00:1c.2: Signaling PME with IRQ 124
[    0.882903] pcieport 0000:00:1c.3: Signaling PME with IRQ 125
[    0.882912] pcieport 0000:00:1d.0: Signaling PME with IRQ 126
[    0.882946] efifb: probing for efifb
[    0.882956] efifb: framebuffer at 0xb0000000, using 8100k, total 8100k
[    0.882956] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.882957] efifb: scrolling: redraw
[    0.882958] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.883047] Console: switching to colour frame buffer device 240x67
[    0.883064] fb0: EFI VGA frame buffer device
[    0.883069] intel_idle: MWAIT substates: 0x11142120
[    0.883070] intel_idle: v0.4.1 model 0x9E
[    0.883484] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.883555] ACPI: AC Adapter [ADP0] (off-line)
[    0.883628] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.883637] ACPI: Lid Switch [LID0]
[    0.883660] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.883661] ACPI: Power Button [PWRB]
[    0.883684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.883685] ACPI: Power Button [PWRF]
[    0.884051] GHES: HEST is not enabled!
[    0.884106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.885514] Linux agpgart interface v0.103
[    0.887903] loop: module loaded
[    0.888012] libphy: Fixed MDIO Bus: probed
[    0.888013] tun: Universal TUN/TAP device driver, 1.6
[    0.888013] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.888076] PPP generic driver version 2.4.2
[    0.888148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.888149] ehci-pci: EHCI PCI platform driver
[    0.888156] ehci-platform: EHCI generic platform driver
[    0.888161] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.888162] ohci-pci: OHCI PCI platform driver
[    0.888167] ohci-platform: OHCI generic platform driver
[    0.888171] uhci_hcd: USB Universal Host Controller Interface driver
[    0.888289] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.888294] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.889374] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.889378] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.889445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.889446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.889447] usb usb1: Product: xHCI Host Controller
[    0.889448] usb usb1: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
[    0.889448] usb usb1: SerialNumber: 0000:00:14.0
[    0.889566] hub 1-0:1.0: USB hub found
[    0.889581] hub 1-0:1.0: 16 ports detected
[    0.899580] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.899582] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.899604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.899605] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.899606] usb usb2: Product: xHCI Host Controller
[    0.899606] usb usb2: Manufacturer: Linux 4.10.0-28-generic xhci-hcd
[    0.899607] usb usb2: SerialNumber: 0000:00:14.0
[    0.899714] hub 2-0:1.0: USB hub found
[    0.899723] hub 2-0:1.0: 8 ports detected
[    0.902834] usb: port power management may be unreliable
[    0.904871] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.909032] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.909035] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.909203] mousedev: PS/2 mouse device common for all mice
[    0.909501] rtc_cmos 00:04: RTC can wake from S4
[    0.909900] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.909982] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.909987] i2c /dev entries driver
[    0.910025] device-mapper: uevent: version 1.0.3
[    0.910110] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.910111] intel_pstate: Intel P-state driver initializing
[    0.910155] intel_pstate: Disabling energy efficiency optimization
[    0.910963] intel_pstate: HWP enabled
[    0.911274] ledtrig-cpu: registered to indicate activity on CPUs
[    0.911276] EFI Variables Facility v0.08 2004-May-17
[    0.913433] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.940018] NET: Registered protocol family 10
[    0.944025] Segment Routing with IPv6
[    0.944047] NET: Registered protocol family 17
[    0.944052] Key type dns_resolver registered
[    0.944806] microcode: sig=0x906e9, pf=0x20, revision=0x48
[    0.945097] microcode: Microcode Update Driver: v2.2.
[    0.946737] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[    0.946751] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[    0.946752] EFI: Problem loading in-kernel X.509 certificate (-65)
[    0.948643] EFI: Loaded cert 'MEDION Certificate: 8742f4c8e657b4a44f303df3728573a7' linked to '.builtin_trusted_keys'
[    0.949171] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[    0.950269] registered taskstats version 1
[    0.950275] Loading compiled-in X.509 certificates
[    0.952812] Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd'
[    0.952828] zswap: loaded using pool lzo/zbud
[    0.960421] Key type big_key registered
[    0.960423] Key type trusted registered
[    0.962288] Key type encrypted registered
[    0.962290] AppArmor: AppArmor sha1 policy hashing enabled
[    0.962291] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.962300] evm: HMAC attrs: 0x1
[    0.964873]   Magic number: 13:267:341
[    0.964880] usb usb1-port12: hash matches
[    0.965078] rtc_cmos 00:04: setting system clock to 2017-08-01 18:19:05 UTC (1501611545)
[    0.965272] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.965272] EDD information not available.
[    0.985247] ACPI: Battery Slot [BAT0] (battery present)
[    0.986431] Freeing unused kernel memory: 2228K
[    0.986432] Write protecting the kernel read-only data: 14336k
[    0.986761] Freeing unused kernel memory: 1164K
[    0.987133] Freeing unused kernel memory: 272K
[    0.991480] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.998703] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.998747] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.998754] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.998887] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.998902] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.999687] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.999715] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.999723] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.999871] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.999895] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.016146] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    1.018818] hidraw: raw HID events driver (C) Jiri Kosina
[    1.019698] wmi: Mapper loaded
[    1.032924] sdhci: Secure Digital Host Controller Interface driver
[    1.032925] sdhci: Copyright(c) Pierre Ossman
[    1.034222] sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8621] (rev 1)
[    1.036026] ahci 0000:00:17.0: version 3.0
[    1.036048] mmc0: Unknown controller version (3). You may experience problems.
[    1.036243] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.036247] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.038055] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[    1.038661] [drm] Initialized
[    1.039717] nvme nvme0: pci function 0000:05:00.0
[    1.046327] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x4 impl SATA mode
[    1.046329] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
[    1.046976] scsi host0: ahci
[    1.047103] scsi host1: ahci
[    1.047207] scsi host2: ahci
[    1.047249] ata1: DUMMY
[    1.047250] ata2: DUMMY
[    1.047252] ata3: SATA max UDMA/133 abar m2048@0xa442c000 port 0xa442c200 irq 320
[    1.053428] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffb8f041905000, c8:5b:76:df:89:d8, XID 10900800 IRQ 322
[    1.053430] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.056500] [drm] Memory usable by graphics device = 4096M
[    1.056502] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
[    1.056502] fb: switching to inteldrmfb from EFI VGA
[    1.056520] Console: switching to colour dummy device 80x25
[    1.056661] [drm] Replacing VGA console driver
[    1.059058] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[    1.059088] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[    1.059129] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[    1.059208] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[    1.059210] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.059210] nouveau: detected PR support, will not use DSM
[    1.059228] nouveau 0000:01:00.0: enabling device (0106 -> 0107)
[    1.059530] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
[    1.062149] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.062150] [drm] Driver supports precise vblank timestamp query.
[    1.065135] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    1.065136] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    1.066474] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.072192] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    1.075348] [drm] GuC firmware load skipped
[    1.097197] nouveau 0000:01:00.0: bios: version 86.07.3a.00.27
[    1.153889] nouveau 0000:01:00.0: priv: HUB0: 00d054 00000007 (1a408216)
[    1.153892] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
[    1.154016] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (19408227)
[    1.155496] vga_switcheroo: enabled
[    1.155658] [TTM] Zone  kernel: Available graphics memory: 8150772 kiB
[    1.155659] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.155659] [TTM] Initializing pool allocator
[    1.155662] [TTM] Initializing DMA pool allocator
[    1.155675] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[    1.155676] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.155677] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[    1.155678] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[    1.155678] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    1.155679] nouveau 0000:01:00.0: DRM: DCB version 4.1
[    1.155680] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    1.228508] usb 1-3: new low-speed USB device number 2 using xhci_hcd
[    1.276225]  nvme0n1: p1 p2 p3
[    1.338754] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.363504] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.373754] usb 1-3: New USB device found, idVendor=046d, idProduct=c03f
[    1.373755] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.373755] usb 1-3: Product: USB-PS/2 Optical Mouse
[    1.373756] usb 1-3: Manufacturer: Logitech
[    1.379451] usbcore: registered new interface driver usbhid
[    1.379451] usbhid: USB HID core driver
[    1.380491] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C03F.0001/input/input6
[    1.380585] hid-generic 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3/input0
[    1.401135] ata3.00: ATA-10: ST1000LM035-1RK172, LVM1, max UDMA/133
[    1.401137] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.450602] ata3.00: configured for UDMA/133
[    1.451030] scsi 2:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 LVM1 PQ: 0 ANSI: 5
[    1.490640] nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
[    1.492533] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.520787] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    1.521611] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.521628] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.521848] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
[    1.523038] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.523136] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    1.523186] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    1.548939] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.549209] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.549210] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.549291] sd 2:0:0:0: [sda] Write Protect is off
[    1.549292] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.549379] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.620178]  sda: sda1
[    1.621123] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.640772] random: fast init done
[    1.655360] fbcon: inteldrmfb (fb0) is primary device
[    1.655405] Console: switching to colour frame buffer device 240x67
[    1.655420] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.671705] usb 1-6: New USB device found, idVendor=5986, idProduct=06b0
[    1.671706] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.671706] usb 1-6: Product: EasyCamera
[    1.671707] usb 1-6: Manufacturer: Bison
[    1.671707] usb 1-6: SerialNumber: 151027
[    1.672726] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x6d4f00)
[    1.690898] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0c.
[    1.706201] psmouse serio1: elantech: Elan sample query result 02, 2d, a8
[    1.792987] usb 1-11: new full-speed USB device number 4 using xhci_hcd
[    1.797059] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    1.888708] clocksource: Switched to clocksource tsc
[    1.908529] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.934216] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b
[    1.934217] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.019229] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.019345] systemd[1]: Detected architecture x86-64.
[    2.019452] systemd[1]: Set hostname to <prutmajs>.
[    2.058118] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    2.058190] systemd[1]: Created slice User and Session Slice.
[    2.058209] systemd[1]: Listening on Syslog Socket.
[    2.058224] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.058237] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.058241] systemd[1]: Reached target Remote File Systems (Pre).
[    2.058245] systemd[1]: Reached target Remote File Systems.
[    2.066720] lp: driver loaded but no devices found
[    2.068885] ppdev: user-space parallel port driver
[    2.103047] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    2.113515] systemd-journald[295]: Received request to flush runtime journal from PID 1
[    2.259595] Bluetooth: Core ver 2.22
[    2.259603] NET: Registered protocol family 31
[    2.259604] Bluetooth: HCI device and connection manager initialized
[    2.259605] Bluetooth: HCI socket layer initialized
[    2.259606] Bluetooth: L2CAP socket layer initialized
[    2.259608] Bluetooth: SCO socket layer initialized
[    2.269831] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.271812] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.275975] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.278946] Bluetooth: HCI UART driver ver 2.3
[    2.278947] Bluetooth: HCI UART protocol H4 registered
[    2.278947] Bluetooth: HCI UART protocol BCSP registered
[    2.278948] Bluetooth: HCI UART protocol LL registered
[    2.278948] Bluetooth: HCI UART protocol ATH3K registered
[    2.278948] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.278967] Bluetooth: HCI UART protocol Intel registered
[    2.278981] Bluetooth: HCI UART protocol Broadcom registered
[    2.278981] Bluetooth: HCI UART protocol QCA registered
[    2.278981] Bluetooth: HCI UART protocol AG6XX registered
[    2.278982] Bluetooth: HCI UART protocol Marvell registered
[    2.295457] random: crng init done
[    2.298866] usbcore: registered new interface driver btusb
[    2.301270] Bluetooth: hci0: Firmware revision 0.1 build 103 week 50 2016
[    2.305131] AVX2 version of gcm_enc/dec engaged.
[    2.305131] AES CTR mode by8 optimization enabled
[    2.311605] Intel(R) Wireless WiFi driver for Linux
[    2.311605] Copyright(c) 2003- 2015 Intel Corporation
[    2.316134] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
[    2.316673] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
[    2.317486] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
[    2.318133] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
[    2.322174] iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
[    2.332690] media: Linux media interface: v0.10
[    2.338843] Linux video capture interface: v2.00
[    2.340711] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    2.343127] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    2.344060] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    2.350158] uvcvideo: Found UVC 1.00 device EasyCamera (5986:06b0)
[    2.353094] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    2.353096] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    2.353097] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    2.353097] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    2.353138] input: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
[    2.353167] usbcore: registered new interface driver uvcvideo
[    2.353167] USB Video Class driver (1.1.1)
[    2.377314] intel_rapl: Found RAPL domain package
[    2.377315] intel_rapl: Found RAPL domain core
[    2.377316] intel_rapl: Found RAPL domain uncore
[    2.377317] intel_rapl: Found RAPL domain dram
[    2.407941] Adding 16648188k swap on /dev/nvme0n1p3.  Priority:-1 extents:1 across:16648188k SSFS
[    2.463272] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.463467] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.463483] thermal thermal_zone2: failed to read out thermal zone (-5)
[    2.464064] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    2.849899] [drm] RC6 on
[    2.941448] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    3.476823] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.499158] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.499159] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.499160] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.499160] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.499161] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.499161] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.499162] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.511259] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    3.511292] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.511322] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.511350] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.511377] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    3.732144] audit: type=1400 audit(1501611548.259:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=849 comm="apparmor_parser"
[    3.732215] audit: type=1400 audit(1501611548.259:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=846 comm="apparmor_parser"
[    3.732216] audit: type=1400 audit(1501611548.259:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=846 comm="apparmor_parser"
[    3.733195] audit: type=1400 audit(1501611548.263:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
[    3.733197] audit: type=1400 audit(1501611548.263:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
[    3.733197] audit: type=1400 audit(1501611548.263:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=842 comm="apparmor_parser"
[    3.733198] audit: type=1400 audit(1501611548.263:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
[    3.733315] audit: type=1400 audit(1501611548.263:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=851 comm="apparmor_parser"
[    3.733691] audit: type=1400 audit(1501611548.263:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=847 comm="apparmor_parser"
[    3.771878] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.771879] Bluetooth: BNEP filters: protocol multicast
[    3.771882] Bluetooth: BNEP socket layer initialized
[    3.870764] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    3.872764] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    3.873406] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    3.990925] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    3.991273] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[    4.053141] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.056122] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    4.078677] r8169 0000:04:00.0 enp4s0: link down
[    4.078730] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[    4.151440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.745653] Bluetooth: RFCOMM TTY layer initialized
[    5.745658] Bluetooth: RFCOMM socket layer initialized
[    5.745662] Bluetooth: RFCOMM ver 1.11
[    8.495056] wlp3s0: authenticate with b2:b2:dc:cc:fe:44
[    8.505720] wlp3s0: send auth to b2:b2:dc:cc:fe:44 (try 1/3)
[    8.512542] wlp3s0: authenticated
[    8.516533] wlp3s0: associate with b2:b2:dc:cc:fe:44 (try 1/3)
[    8.524125] wlp3s0: RX AssocResp from b2:b2:dc:cc:fe:44 (capab=0x411 status=0 aid=2)
[    8.539731] wlp3s0: associated
[    8.539799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[    9.760507] nouveau 0000:01:00.0: DRM: evicting buffers...
[   10.000616] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   10.000617] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   10.000619] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
[  856.405014] systemd: 36 output lines suppressed due to ratelimiting

Alt dét forstår jeg ikke rigtig noget af. Er der mon nogen der kan hjælpe mig videre?

[AJenbo]

viewtopic.php?f=13&t=21581

[marie@idiomatic]

Har googlet lidt på må og få og bl.a. fundet denne tråd:
https://askubuntu.com/questions/852590/failed-installation-of-virtualbox-5-1-on-ubuntu-16-04
hvor der allernederst står:

With Ubuntu hosts the following is all you need to do. When you boot after kernel upgrade and you get the kernel module failed to load DBUS message issue the following from a terminal window of your choosing:

All you need to do is issue:

sudo dpkg-reconfigure virtualbox-5.1

Once you do you will get the setup message that it needs to create a system users group. Just hit enter and it will drop back to terminal and you will see a one liner stating the group already exists and a blank line below that. The module rebuild process is hidden behind this blank line. Wait until an interactive prompt returns (only takes a minute or 2). Then you will be good to go.

Men jeg ved jo ikke om det er den løsning der vil hjælpe mig. Risikerer jeg at beskadige min installation (eller endnu værre: min virtuelle maskine) hvis jeg prøver?

For øvrigt står der i min VirtualBox under "Hjælp" > "Om VirtualBox" følgende:
Version 5.1.22 r115126 (Qt5.5.1)
Og da jeg startede VirtualBox nu i aften, fik jeg som det allerførste besked om at der er en ny version tilgængelig. Skulle jeg mon kaste mig ud i en opgradering og se om det bringer mig videre i forhold til opstartsproblemet? Eller kan det tværtimod tænkes at gøre problemerne større?

[marie@idiomatic]

https://ubuntudanmark.dk/forum/viewtopic.php?f=13&t=21581

Hov, Anders, dit svar nåede jeg ikke at se før jeg postede min næste kommentar ...
Altså, jeg har ikke så meget mod på at skifte til en anden VM lige nu hvis det kan undgås. Men måske kan jeg bruge det sidste svar i tråden du linker til - dét fra thj01. Tror du det kan funke? Jeg har ikke hjerne til det i aften, men kunne prøve i morgen formiddag. Hans ord om at det handler om "at have de fejlrettelser der er nødvendige for at køre med nyere kerner" lyder som om det meget vel kunne være netop dét der er mit problem.

Men altså - at afinstallere VirtualBox for derefter at installere det på ny, er det fuldstændig risikofrit i forhold til selve den virtuelle maskine? Altså min Windows 7-installation - den risikerer jeg vel ikke at miste eller beskadige eller på nogen måde ændre bare fordi jeg afinstallerer VirtualBox, vel?

[marie@idiomatic]

Kan jeg tillade mig at blande mig i Klaus' tråd for at spørge ind til detaljerne (for at få fremgangsmåden skåret ud i pap)?

[AJenbo]

Ubuntu opgradere ikke kernen udgaven vedmindre man selv tilføje et ppa eller køre en beta. Så jeg tror ikke udmildbart det er det der er problemet. Men det ser da ud til at være et problem for flere.

Jeg kan ikke garantere om løsningerne ikke kan give problemer, men det virker rimelig standard og lyder som det du også har gjort tidligere.

Dine virtuelle maskiner er en del af din bruger data så det bliver ikke påvirket af hvad du gør ved dit system.

[marie@idiomatic]

Tak, Jens. Jeg kom i mellemtiden i tanker om lige at tage backup af systemet først - under "Fil" i VirtualBox er der nemlig et menupunkt som giver mulighed for at eksportere systemet til en .ova-fil. Skulle der mod forventning ske noget med mit disk image når jeg af- og reinstallerer - eller hvis den nye VirtualBox af en eller anden grund ikke kan finde det - burde jeg simpelthen kunne importere maskinen forfra i den nye VirtualBox.

[marie@idiomatic]

Ubuntu opgradere ikke kernen udgaven vedmindre man selv tilføje et ppa eller køre en beta. Så jeg tror ikke udmildbart det er det der er problemet. Men det ser da ud til at være et problem for flere.

Jeg kan ikke garantere om løsningerne ikke kan give problemer, men det virker rimelig standard og lyder som det du også har gjort tidligere.

OK, jeg må hellere bare prøve det og se om det hjælper, selv om problemet måske er et andet. Men jeg er ikke sikker på hvordan jeg skal gå frem. Fx er jeg ikke sikker om om vejledningen på https://www.virtualbox.org/wiki/Linux_Downloads og thj01's installationsscript gør det samme - altså om jeg bare kan bruge scriptet i stedet for at prøve at forstå vejledningen? Jeg ved heller ikke hvad PPA er.

Og jeg ved faktisk heller ikke hvordan man afinstallerer den gamle version af VirtualBox, hvilket jeg kan forstå at man skal gøre først?

Det er rigtigt at jeg selv installerede VirtualBox i april eller maj og sikkert gjorde noget lignende. Men jeg kan faktisk ikke huske hvordan jeg gjorde. Vejledningen thj01 linker til, virker bekendt, så jeg har formodentlig forsøgt at følge den. Men jeg kan jo sagtens have gjort noget forkert selv om jeg prøvede at følge vejledningen.

For øvrigt tilbyder min VirtualBox mig selv at downloade den nye version og åbne den med "Softwareinstallation". Ville det være en korrekt måde at gøre det på? Filen hedder "virtualbox-5.1_5.1.26-117224~Ubuntu~xenial_amd64.deb".

[AJenbo]

Et PPA er en software kanal man kan abonere på for at få opdateringer og programmer ud over det der er med i Ubuntus standard kanaler.

Når du får tilbud om manuelle opdateringer har du også installeret det manuelt ved at hente en .deb. Det er nok i virkeligheden det der er problemet for så har du ikke en version der løbende opdateres sammen med resten af systemet.

[marie@idiomatic]

Nå, på den måde. Ja, så er det nok dér problemet ligger. Jeg må vist hellere lige få læst på dét med PPA'er, så.

thj01 har også været så venlig at sende mig links til et par vejledninger han har lavet, og den ene handler vist om netop dét. Her er linkene, så andre også kan have glæde af dem:

http://www.vidas.dk/guides/Term_05_Programadministration.html
http://www.vidas.dk/guides/virtualbox.html

[marie@idiomatic]

Hm, jeg har problemer med at afinstallere VirtualBox. Med

Kode: Vælg alt

sudo apt remove virtualbox

får jeg

Kode: Vælg alt

Indlæser pakkelisterne... Færdig
Opbygger afhængighedstræ       
Læser tilstandsoplysninger... Færdig
Pakke »virtualbox« er ikke installeret, så blev ikke fjernet

Kan det være fordi jeg oprindelig ikke installerede VirtualBox med apt?

[AJenbo]

Du har installeret det manuelt via en deb du har hentet, så apt kan ikke fjerne det. Prøv med Synaptic.

[marie@idiomatic]

Nu har jeg installeret Synaptic, startet det og fundet VirtualBox deri. Skal jeg vælge "Markér til fjernelse" eller "Markér til fuldstændig fjernelse"?

[marie@idiomatic]

I hjælpemenuen står der:

Debian only: To remove all files related to the package choose Mark for Complete Removal instead of Mark for Removal.

Men hvilken slags "relaterede filer" kan det handle om? Forhåbentlig ikke fx mit disk image? Måske er det sikrest at nøjes med "Markér til fjernelse".