Hvordan slukkes maskinen ?

[vovsen]

Det generer lidt for meget, at maskinen ikke slukker ved afslutning af arbejdet.
Der står godt nok på skærmen, at alt er stoppet, men maskinen slukkes ikke som tidligere.
Har I en kommando "på lager", der kan afgives og som derved sikrer at spændingsforsyningen også slukkes, hver gang man software-slukker LINUX.

[AJenbo]

Prøv:

Kode: Vælg alt

sudo shutdown -h now

Virker det ikke giv os resultatet af denne:

Kode: Vælg alt

dmesg

[vovsen]

Virkede desværre kun som når jeg "slukker" maskinen.
Kan ikke vedhæfte "dmesg-report.txt" eller bare "dmesg-report" => ugyldig filtype
Derfor får du hele smøren i 'kopi'.

dmesg

Kode: Vælg alt

[    0.000000] microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-22-generic (buildd@lgw01-41) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 (Ubuntu 4.4.0-22.40-generic 4.4.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=cd9d56c2-9183-447a-811a-00efd1504e77 ro acpi=off noapic nodmraid quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbe000-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: MEDIONPC MS-7366/MS-7366, BIOS A7366MLN.407 10/14/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33b66000-0x35daafff]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048398
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782256 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: nVidia  
[    0.000000] MPTABLE: Product ID: MCP73       
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Processor #2
[    0.000000] Processor #3
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 4
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffbe000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfffe000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xbfffe000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031994
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=cd9d56c2-9183-447a-811a-00efd1504e77 ro acpi=off noapic nodmraid quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4007568K/4193592K available (8359K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 186024K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2499.846 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.69 BogoMIPS (lpj=9999384)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004048] Security Framework initialized
[    0.004051] Yama: becoming mindful.
[    0.004075] AppArmor: AppArmor initialized
[    0.004428] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009145] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010186] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010198] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010556] Initializing cgroup subsys io
[    0.010564] Initializing cgroup subsys memory
[    0.010575] Initializing cgroup subsys devices
[    0.010580] Initializing cgroup subsys freezer
[    0.010584] Initializing cgroup subsys net_cls
[    0.010587] Initializing cgroup subsys perf_event
[    0.010590] Initializing cgroup subsys net_prio
[    0.010594] Initializing cgroup subsys hugetlb
[    0.010598] Initializing cgroup subsys pids
[    0.010625] CPU: Physical Processor ID: 0
[    0.010627] CPU: Processor Core ID: 0
[    0.010629] mce: CPU supports 6 MCE banks
[    0.010638] CPU0: Thermal monitoring enabled (TM2)
[    0.010643] process: using mwait in idle threads
[    0.010649] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.010650] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.011025] Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000)
[    0.013194] ftrace: allocating 31906 entries in 125 pages
[    0.024140] smpboot: Max logical packages: 1
[    0.024145] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.132020] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q8300  @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.132039] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.132048] ... version:                2
[    0.132049] ... bit width:              40
[    0.132050] ... generic registers:      2
[    0.132051] ... value mask:             000000ffffffffff
[    0.132053] ... max period:             000000007fffffff
[    0.132054] ... fixed-purpose events:   3
[    0.132055] ... event mask:             0000000700000003
[    0.133141] x86: Booting SMP configuration:
[    0.133144] .... node  #0, CPUs:      #1
[    0.008000] microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.140118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.140237]  #2
[    0.008000] microcode: CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.148117]  #3
[    0.008000] microcode: CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.155637] x86: Booted up 1 node, 4 CPUs
[    0.155642] smpboot: Total of 4 processors activated (19998.76 BogoMIPS)
[    0.156195] devtmpfs: initialized
[    0.161560] evm: security.selinux
[    0.161562] evm: security.SMACK64
[    0.161563] evm: security.SMACK64EXEC
[    0.161565] evm: security.SMACK64TRANSMUTE
[    0.161566] evm: security.SMACK64MMAP
[    0.161567] evm: security.ima
[    0.161568] evm: security.capability
[    0.161590] PM: Registering ACPI NVS region [mem 0xbffbe000-0xbffeffff] (204800 bytes)
[    0.161590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.161590] pinctrl core: initialized pinctrl subsystem
[    0.161590] RTC time: 11:37:26, date: 05/18/16
[    0.161590] NET: Registered protocol family 16
[    0.172007] cpuidle: using governor ladder
[    0.184004] cpuidle: using governor menu
[    0.184199] PCI: Using configuration type 1 for base access
[    0.184464] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.184465] mtrr: probably your BIOS does not setup all CPUs.
[    0.184466] mtrr: corrected configuration.
[    0.196099] ACPI: Interpreter disabled.
[    0.196195] vgaarb: loaded
[    0.196357] SCSI subsystem initialized
[    0.196377] libata version 3.00 loaded.
[    0.196377] usbcore: registered new interface driver usbfs
[    0.196377] usbcore: registered new interface driver hub
[    0.196377] usbcore: registered new device driver usb
[    0.196377] PCI: Probing PCI hardware
[    0.196377] PCI: root bus 00: using default resources
[    0.196377] PCI: Probing PCI hardware (bus 00)
[    0.196377] PCI host bridge to bus 0000:00
[    0.196377] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.196377] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.196377] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.196377] pci 0000:00:00.0: [10de:07c7] type 00 class 0x060000
[    0.196377] pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000
[    0.196397] pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000
[    0.196538] pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000
[    0.196679] pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000
[    0.196819] pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000
[    0.196959] pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000
[    0.197101] pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000
[    0.197243] pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000
[    0.197384] pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000
[    0.197526] pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100
[    0.197536] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.197608] pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500
[    0.197625] pci 0000:00:03.1: reg 0x10: [io  0x4900-0x493f]
[    0.197644] pci 0000:00:03.1: reg 0x20: [io  0x4d00-0x4d3f]
[    0.197650] pci 0000:00:03.1: reg 0x24: [io  0x4e00-0x4e3f]
[    0.197672] pci 0000:00:03.1: PME# supported from D3hot D3cold
[    0.197726] pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000
[    0.197805] pci 0000:00:03.3: [10de:07da] type 00 class 0x0b4000
[    0.197827] pci 0000:00:03.3: reg 0x10: [mem 0xfce80000-0xfcefffff]
[    0.197975] pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000
[    0.198117] pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310
[    0.198131] pci 0000:00:04.0: reg 0x10: [mem 0xfce7f000-0xfce7ffff]
[    0.198169] pci 0000:00:04.0: supports D1 D2
[    0.198171] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.198221] pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320
[    0.198238] pci 0000:00:04.1: reg 0x10: [mem 0xfce7ec00-0xfce7ecff]
[    0.198290] pci 0000:00:04.1: supports D1 D2
[    0.198292] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.198357] pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300
[    0.198374] pci 0000:00:09.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[    0.198414] pci 0000:00:09.0: PME# supported from D3hot D3cold
[    0.198464] pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401
[    0.198531] pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400
[    0.198562] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.198614] pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400
[    0.198645] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200033] pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400
[    0.200063] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200118] pci 0000:00:0e.0: [10de:07f4] type 00 class 0x010601
[    0.200132] pci 0000:00:0e.0: reg 0x10: [io  0xd480-0xd487]
[    0.200138] pci 0000:00:0e.0: reg 0x14: [io  0xd400-0xd403]
[    0.200143] pci 0000:00:0e.0: reg 0x18: [io  0xd080-0xd087]
[    0.200148] pci 0000:00:0e.0: reg 0x1c: [io  0xd000-0xd003]
[    0.200153] pci 0000:00:0e.0: reg 0x20: [io  0xcc00-0xcc0f]
[    0.200158] pci 0000:00:0e.0: reg 0x24: [mem 0xfce7c000-0xfce7dfff]
[    0.200218] pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000
[    0.200234] pci 0000:00:0f.0: reg 0x10: [mem 0xfce77000-0xfce77fff]
[    0.200239] pci 0000:00:0f.0: reg 0x14: [io  0xc880-0xc887]
[    0.200245] pci 0000:00:0f.0: reg 0x18: [mem 0xfce7e800-0xfce7e8ff]
[    0.200250] pci 0000:00:0f.0: reg 0x1c: [mem 0xfce7e400-0xfce7e40f]
[    0.200276] pci 0000:00:0f.0: supports D1 D2
[    0.200278] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.200406] pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode)
[    0.200412] pci 0000:00:0a.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.200414] pci 0000:00:0a.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.200454] pci 0000:02:00.0: [10de:0ca3] type 00 class 0x030000
[    0.200472] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.200482] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.200491] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.200498] pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.200505] pci 0000:02:00.0: reg 0x30: [mem 0xfcf80000-0xfcffffff pref]
[    0.200560] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.200562] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.200578] pci 0000:02:00.1: [10de:0be4] type 00 class 0x040300
[    0.200594] pci 0000:02:00.1: reg 0x10: [mem 0xfcf7c000-0xfcf7ffff]
[    0.208016] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.208021] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.208024] pci 0000:00:0b.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.208029] pci 0000:00:0b.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.208086] pci 0000:03:00.0: [1131:7231] type 00 class 0x048000
[    0.208121] pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[    0.208139] pci 0000:03:00.0: reg 0x18: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.208214] pci 0000:03:00.0: supports D1 D2
[    0.208216] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.216014] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.216019] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe7fffff]
[    0.216082] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010
[    0.216119] pci 0000:04:00.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.216133] pci 0000:04:00.0: reg 0x14: [mem 0xfebff400-0xfebff47f]
[    0.216171] pci 0000:04:00.0: reg 0x20: [mem 0xfebff000-0xfebff07f]
[    0.216195] pci 0000:04:00.0: reg 0x24: [mem 0xfebfec00-0xfebfec7f]
[    0.224013] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.224019] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.224035] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[    0.224069] pci 0000:00:03.0: default IRQ router [10de:07d7]
[    0.224121] PCI: pci_cache_line_size set to 64 bytes
[    0.224218] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.224220] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff]
[    0.224351] NetLabel: Initializing
[    0.224352] NetLabel:  domain hash size = 128
[    0.224354] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.224370] NetLabel:  unlabeled traffic allowed by default
[    0.224398] clocksource: Switched to clocksource refined-jiffies
[    0.234046] AppArmor: AppArmor Filesystem Enabled
[    0.234127] pnp: PnP ACPI: disabled
[    0.236139] pci 0000:00:0a.0: PCI bridge to [bus 01]
[    0.236151] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.236154] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.236158] pci 0000:00:0b.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.236162] pci 0000:00:0b.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.236167] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.236171] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe7fffff]
[    0.236177] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.236181] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.236187] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.236190] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.236193] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.236195] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[    0.236198] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.236200] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfdffffff]
[    0.236203] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.236206] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe7fffff]
[    0.236208] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.236250] NET: Registered protocol family 2
[    0.236535] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.236698] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.236938] TCP: Hash tables configured (established 32768 bind 32768)
[    0.236985] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.237020] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.237095] NET: Registered protocol family 1
[    0.308077] pci 0000:02:00.0: Video device with shadowed ROM
[    0.308093] PCI: CLS 64 bytes, default 64
[    0.308168] Trying to unpack rootfs image as initramfs...
[    0.916969] Freeing initrd memory: 35092K (ffff880033b66000 - ffff880035dab000)
[    0.916995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.916995] software IO TLB [mem 0xbbfb0000-0xbffb0000] (64MB) mapped at [ffff8800bbfb0000-ffff8800bffaffff]
[    0.917064] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.917064] Scanning for low memory corruption every 60 seconds
[    0.917064] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.917064] audit: initializing netlink subsys (disabled)
[    0.917064] audit: type=2000 audit(1463571446.916:1): initialized
[    0.917064] Initialise system trusted keyring
[    0.917064] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.917064] zbud: loaded
[    0.920246] VFS: Disk quotas dquot_6.6.0
[    0.920292] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.920858] fuse init (API version 7.23)
[    0.920858] Key type big_key registered
[    0.920858] Allocating IMA MOK and blacklist keyrings.
[    0.920858] Key type asymmetric registered
[    0.920858] Asymmetric key parser 'x509' registered
[    0.920858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.920858] io scheduler noop registered
[    0.920858] io scheduler deadline registered (default)
[    0.920858] io scheduler cfq registered
[    0.920858] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    0.920858] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.920858] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.920858] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    0.920858] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    0.920858] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.920858] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    0.920858] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    0.920858] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.920858] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    0.920858] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.920858] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.920858] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[    0.920858] vesafb: scrolling: redraw
[    0.920858] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.920858] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90000800000, using 7552k, total 7552k
[    0.920858] Console: switching to colour frame buffer device 200x75
[    0.920858] fb0: VESA VGA frame buffer device
[    0.920858] intel_idle: does not run on family 6 model 23
[    0.920858] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.924144] Linux agpgart interface v0.103
[    0.928224] brd: module loaded
[    0.928224] loop: module loaded
[    0.928433] libphy: Fixed MDIO Bus: probed
[    0.928437] tun: Universal TUN/TAP device driver, 1.6
[    0.928438] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.928464] PPP generic driver version 2.4.2
[    0.928464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.928464] ehci-pci: EHCI PCI platform driver
[    0.928464] ehci-pci 0000:00:04.1: EHCI Host Controller
[    0.928464] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    0.928464] ehci-pci 0000:00:04.1: debug port 1
[    0.928464] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    0.928464] ehci-pci 0000:00:04.1: irq 11, io mem 0xfce7ec00
[    0.940053] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.940108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.940111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.940114] usb usb1: Product: EHCI Host Controller
[    0.940116] usb usb1: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
[    0.940119] usb usb1: SerialNumber: 0000:00:04.1
[    0.940191] hub 1-0:1.0: USB hub found
[    0.940191] hub 1-0:1.0: 10 ports detected
[    0.940350] ehci-platform: EHCI generic platform driver
[    0.940361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.940365] ohci-pci: OHCI PCI platform driver
[    0.940389] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    0.940395] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    0.940414] ohci-pci 0000:00:04.0: irq 10, io mem 0xfce7f000
[    0.998080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.998083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.998085] usb usb2: Product: OHCI PCI host controller
[    0.998087] usb usb2: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
[    0.998089] usb usb2: SerialNumber: 0000:00:04.0
[    0.998146] hub 2-0:1.0: USB hub found
[    0.998146] hub 2-0:1.0: 10 ports detected
[    0.998146] ohci-platform: OHCI generic platform driver
[    0.998146] uhci_hcd: USB Universal Host Controller Interface driver
[    0.998146] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.998146] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.998146] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.998146] mousedev: PS/2 mouse device common for all mice
[    0.998146] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.998146] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    0.998146] i2c /dev entries driver
[    0.998146] device-mapper: uevent: version 1.0.3
[    1.000063] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.000082] ledtrig-cpu: registered to indicate activity on CPUs
[    1.000351] NET: Registered protocol family 10
[    1.000482] NET: Registered protocol family 17
[    1.000482] Key type dns_resolver registered
[    1.000468] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.000482] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.000482] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.000482] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.000482] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.000482] registered taskstats version 1
[    1.000482] Loading compiled-in X.509 certificates
[    1.001168] Loaded X.509 cert 'Build time autogenerated kernel key: 10281ca0c0463cd0680138fff55319c9bd7d63b8'
[    1.001190] zswap: loaded using pool lzo/zbud
[    1.004073] Key type trusted registered
[    1.008059] Key type encrypted registered
[    1.008065] AppArmor: AppArmor sha1 policy hashing enabled
[    1.008070] ima: No TPM chip found, activating TPM-bypass!
[    1.008096] evm: HMAC attrs: 0x1
[    1.008374]   Magic number: 0:94:631
[    1.008374] rtc_cmos rtc_cmos: setting system clock to 2016-05-18 11:37:27 UTC (1463571447)
[    1.008374] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.008374] EDD information not available.
[    1.008374] PM: Hibernation image not present or could not be loaded.
[    1.009767] Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000)
[    1.009770] Write protecting the kernel read-only data: 14336k
[    1.010661] Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000)
[    1.010661] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[    1.024891] random: systemd-udevd urandom read with 2 bits of entropy available
[    1.057104] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.059996] [drm] Initialized drm 1.1.0 20060810
[    1.063258] firewire_ohci 0000:04:00.0: overriding IsoXmitIntMask
[    1.121169] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 40:61:86:34:f1:52
[    1.121174] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.121193] ahci 0000:00:0e.0: version 3.0
[    1.121193] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[    1.121193] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
[    1.121193] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.121193] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio 
[    1.121368] forcedeth 0000:00:0f.0 enp0s15: renamed from eth0
[    1.121388] scsi host0: ahci
[    1.121388] scsi host1: ahci
[    1.121388] scsi host2: ahci
[    1.121388] scsi host3: ahci
[    1.121388] ata1: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c100 irq 5
[    1.121388] ata2: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c180 irq 5
[    1.121388] ata3: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c200 irq 5
[    1.121388] ata4: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c280 irq 5
[    1.124104] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    1.308075] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    1.440082] ata4: SATA link down (SStatus 0 SControl 300)
[    1.440096] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.440118] ata3: SATA link down (SStatus 0 SControl 300)
[    1.440118] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.440118] usb 1-4: New USB device found, idVendor=0424, idProduct=2514
[    1.440118] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.440181] hub 1-4:1.0: USB hub found
[    1.440181] hub 1-4:1.0: 4 ports detected
[    1.440181] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[    1.440181] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.440181] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[    1.444090] ata1.00: configured for UDMA/133
[    1.444161] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[    1.444203] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.444203] sd 0:0:0:0: [sda] Write Protect is off
[    1.444203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.444203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.444294] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.444360] ata2.00: configured for UDMA/100
[    1.452135] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL01 PQ: 0 ANSI: 5
[    1.472087]  sda: sda1 sda2 < sda5 > sda3 sda4
[    1.472208] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.476101] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.476101] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.476163] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.476221] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.496095] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    1.552093] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    1.624162] firewire_core 0000:04:00.0: created device fw0: GUID 019c73640010dc00, S400
[    1.684104] usb 1-5: New USB device found, idVendor=0424, idProduct=2602
[    1.684104] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.684162] hub 1-5:1.0: USB hub found
[    1.684162] hub 1-5:1.0: 4 ports detected
[    1.716111] usb 2-3: New USB device found, idVendor=04f2, idProduct=0200
[    1.716115] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.716118] usb 2-3: Product: USB Wireless HID Receiver
[    1.716121] usb 2-3: Manufacturer: Chicony
[    1.723452] hidraw: raw HID events driver (C) Jiri Kosina
[    1.760302] usbcore: registered new interface driver usbhid
[    1.760307] usbhid: USB HID core driver
[    1.764883] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/0003:04F2:0200.0001/input/input3
[    1.796107] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    1.820158] hid-generic 0003:04F2:0200.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input0
[    1.824176] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/0003:04F2:0200.0002/input/input4
[    1.880164] hid-generic 0003:04F2:0200.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input1
[    1.880523] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.2/0003:04F2:0200.0003/input/input5
[    1.880554] hid-generic 0003:04F2:0200.0003: input,hidraw2: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input2
[    1.916130] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2408a81d653, max_idle_ns: 440795202126 ns
[    1.916142] clocksource: Switched to clocksource tsc
[    1.929639] usb 1-7: New USB device found, idVendor=174c, idProduct=55aa
[    1.929643] usb 1-7: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.929645] usb 1-7: Product: MEDION HDDrive-n-GO
[    1.929648] usb 1-7: Manufacturer: MEDION
[    1.929650] usb 1-7: SerialNumber: 3170000000000000412C
[    1.933223] usb-storage 1-7:1.0: USB Mass Storage device detected
[    1.933310] usb-storage 1-7:1.0: Quirks match for vid 174c pid 55aa: 400000
[    1.933332] scsi host4: usb-storage 1-7:1.0
[    1.933431] usbcore: registered new interface driver usb-storage
[    1.935046] usbcore: registered new interface driver uas
[    2.000052] usb 1-5.1: new high-speed USB device number 6 using ehci-pci
[    2.186563] usb 1-5.1: New USB device found, idVendor=0424, idProduct=2228
[    2.186569] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.186572] usb 1-5.1: Product: Flash Card Reader USB2.0
[    2.186575] usb 1-5.1: Manufacturer: Generic
[    2.186577] usb 1-5.1: SerialNumber: 000026022601
[    2.186967] usb-storage 1-5.1:1.0: USB Mass Storage device detected
[    2.187083] scsi host5: usb-storage 1-5.1:1.0
[    2.260120] usb 1-5.2: new high-speed USB device number 8 using ehci-pci
[    2.337450] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.354539] usb 1-5.2: New USB device found, idVendor=13d3, idProduct=3306
[    2.354544] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.354547] usb 1-5.2: Product: RTL8191S WLAN Adapter 
[    2.354550] usb 1-5.2: Manufacturer: Manufacturer Realtek 
[    2.354552] usb 1-5.2: SerialNumber: 00e04c000001
[    2.419636] usb 2-8: new low-speed USB device number 3 using ohci-pci
[    2.428170] usb 1-5.3: new low-speed USB device number 9 using ehci-pci
[    2.540799] usb 1-5.3: New USB device found, idVendor=0bc7, idProduct=0006
[    2.540804] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.540806] usb 1-5.3: Product: RF receiver
[    2.540809] usb 1-5.3: Manufacturer: X10 WTI
[    2.630446] usb 2-8: New USB device found, idVendor=04d9, idProduct=0499
[    2.630451] usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.645857] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:04.0/usb2/2-8/2-8:1.0/0003:04D9:0499.0004/input/input6
[    2.645960] hid-generic 0003:04D9:0499.0004: input,hidraw3: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:04.0-8/input0
[    2.934100] scsi 4:0:0:0: Direct-Access     ASMT     2105             0    PQ: 0 ANSI: 6
[    2.934481] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.935078] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.935083] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    2.936949] sd 4:0:0:0: [sdb] Write Protect is off
[    2.936953] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    2.938950] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.944464]  sdb: sdb1
[    2.949959] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.103008] random: nonblocking pool is initialized
[    3.183375] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.183537] systemd[1]: Detected architecture x86-64.
[    3.190343] systemd[1]: Set hostname to <e-MS>.
[    3.194971] scsi 5:0:0:0: Direct-Access     Generic  Flash HS-CF      5.42 PQ: 0 ANSI: 0
[    3.198843] scsi 5:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   5.42 PQ: 0 ANSI: 0
[    3.202467] scsi 5:0:0:2: Direct-Access     Generic  Flash HS-SM      5.42 PQ: 0 ANSI: 0
[    3.202751] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    3.202929] sd 5:0:0:1: Attached scsi generic sg4 type 0
[    3.203091] sd 5:0:0:2: Attached scsi generic sg5 type 0
[    3.381610] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    3.388355] sd 5:0:0:2: [sde] Attached SCSI removable disk
[    3.396353] sd 5:0:0:1: [sdd] 3862528 512-byte logical blocks: (1.98 GB/1.84 GiB)
[    3.407978] sd 5:0:0:1: [sdd] Write Protect is off
[    3.407983] sd 5:0:0:1: [sdd] Mode Sense: 2f 00 00 00
[    3.414977] sd 5:0:0:1: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.459614]  sdd: sdd1
[    3.479990] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[    4.643049] systemd[1]: Listening on Journal Socket.
[    4.643244] systemd[1]: Created slice User and Session Slice.
[    4.643289] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.643315] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.643460] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.643569] systemd[1]: Created slice System Slice.
[    4.652228] systemd[1]: Mounting POSIX Message Queue File System...
[    4.652967] systemd[1]: Started Braille Device Support.
[    4.653898] systemd[1]: Started Read required files in advance.
[    4.654830] systemd[1]: Mounting Huge Pages File System...
[    4.655772] systemd[1]: Starting Uncomplicated firewall...
[    4.655951] systemd[1]: Listening on udev Control Socket.
[    4.656068] systemd[1]: Listening on Journal Audit Socket.
[    4.656105] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.656899] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.656940] systemd[1]: Reached target Encrypted Volumes.
[    4.705876] systemd[1]: Listening on udev Kernel Socket.
[    4.705907] systemd[1]: Reached target User and Group Name Lookups.
[    4.719759] systemd[1]: Mounting Debug File System...
[    4.719861] systemd[1]: Listening on Syslog Socket.
[    4.720627] systemd[1]: Starting Journal Service...
[    4.899318] systemd[1]: Starting Load Kernel Modules...
[    4.899348] systemd[1]: Reached target Remote File Systems (Pre).
[    4.899583] systemd[1]: Created slice system-getty.slice.
[    4.899637] systemd[1]: Reached target Slices.
[    4.899675] systemd[1]: Reached target Remote File Systems.
[    4.915269] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.928907] systemd[1]: Started Uncomplicated firewall.
[    4.929180] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.963681] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.091256] systemd[1]: Started Journal Service.
[    5.444294] lp: driver loaded but no devices found
[    5.510311] ppdev: user-space parallel port driver
[    8.346461] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.599131] systemd-journald[257]: Received request to flush runtime journal from PID 1
[    8.951320] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[    8.951398] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[    9.032028] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.751907] snd_hda_intel 0000:00:09.0: Disabling MSI
[    9.751996] snd_hda_intel 0000:02:00.1: Disabling MSI
[    9.752005] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[   10.570011] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   10.570017] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.570020] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.570022] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.570025] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   10.570027] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.570031] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   10.570034] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   10.570036] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   10.570039] snd_hda_codec_realtek hdaudioC0D0:      Aux=0x1c
[   10.591947] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input7
[   10.592054] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input8
[   10.592137] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input9
[   10.592214] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input10
[   10.788372] Adding 9764860k swap on /dev/sda5.  Priority:-1 extents:1 across:9764860k FS
[   11.259710] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[   11.260451] r8712u: register rtl8712_netdev_ops to netdev_ops
[   11.260456] usb 1-5.2: r8712u: USB_SPEED_HIGH with 4 endpoints
[   11.260900] usb 1-5.2: r8712u: Boot from EFUSE: Autoload OK
[   11.401728] Registered IR keymap rc-medion-x10-or2x
[   11.401884] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/rc/rc0/input11
[   11.401987] rc0: X10 WTI RF receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/rc/rc0
[   11.402050] input: X10 WTI RF receiver mouse as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/input/input12
[   11.402204] usbcore: registered new interface driver ati_remote
[   11.646551] usb 1-5.2: r8712u: CustomerID = 0x0000
[   11.646557] usb 1-5.2: r8712u: MAC Address from efuse = 1c:4b:d6:28:47:c8
[   11.646561] usb 1-5.2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[   11.646682] usbcore: registered new interface driver r8712u
[   11.856764] r8712u 1-5.2:1.0 wlx1c4bd62847c8: renamed from wlan0
[   12.379961] audit: type=1400 audit(1463571458.868:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=634 comm="apparmor_parser"
[   12.406451] audit: type=1400 audit(1463571458.896:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=630 comm="apparmor_parser"
[   12.406464] audit: type=1400 audit(1463571458.896:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=630 comm="apparmor_parser"
[   12.429087] audit: type=1400 audit(1463571458.916:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=631 comm="apparmor_parser"
[   12.429099] audit: type=1400 audit(1463571458.916:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=631 comm="apparmor_parser"
[   12.429105] audit: type=1400 audit(1463571458.916:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=631 comm="apparmor_parser"
[   12.429111] audit: type=1400 audit(1463571458.916:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=631 comm="apparmor_parser"
[   12.480869] audit: type=1400 audit(1463571458.968:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=635 comm="apparmor_parser"
[   12.480884] audit: type=1400 audit(1463571458.968:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=635 comm="apparmor_parser"
[   12.481141] audit: type=1400 audit(1463571458.968:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=637 comm="apparmor_parser"
[   12.571548] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input13
[   12.571644] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input14
[   12.571740] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input15
[   12.571817] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input16
[   12.571897] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input17
[   12.571985] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input18
[   12.572138] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input19
[   12.572209] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input20
[   15.216284] cgroup: new mount options do not match the existing superblock, will be ignored
[   19.501286] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   20.208271] r8712u 1-5.2:1.0 wlx1c4bd62847c8: 1 RCR=0x153f00e
[   20.209015] r8712u 1-5.2:1.0 wlx1c4bd62847c8: 2 RCR=0x553f00e
[   20.317074] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   20.320150] cfg80211: World regulatory domain updated:
[   20.320155] cfg80211:  DFS Master region: unset
[   20.320157] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.320160] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.320162] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.320164] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.320166] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.320169] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.320171] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.320173] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.320175] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.323036] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
[   20.323574] forcedeth 0000:00:0f.0 enp0s15: MSI enabled
[   21.897903] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   29.728238] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.748828] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   29.769281] Ebtables v2.0 registered
[   29.999561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   30.054755] device virbr0-nic entered promiscuous mode
[   30.250084] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   30.356784] virbr0: port 1(virbr0-nic) entered listening state
[   30.356809] virbr0: port 1(virbr0-nic) entered listening state
[   30.589926] virbr0: port 1(virbr0-nic) entered disabled state
[   30.592251] device virbr0-nic left promiscuous mode
[   30.592291] virbr0: port 1(virbr0-nic) entered disabled state
[   46.353987] snd_hda_intel 0000:02:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   47.506665] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  107.452931] perf interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

[thj01]

Jeg har en lignende fejl på min 16.04 installation lige nu, men den plejer at forsvinden efter en eller flere opdateringer.

Jeg tror det skyldes at der er en driver på dit system der gør vrøvl og at den får nedlukningsprocessen til at gå i stå. Når det sker vælger jeg altid at holde tænd/sluk knappen inde i 5 sekunder, så dør computeren af sig selv

[AJenbo]

Derfor får du hele smøren i 'kopi'.

Det var også meningen, men husk at pakke det ind i kode tags når det kommer fra terminalen, på den måde er det lettere at læse og fylder ikke så meget.

Det giver god mening at du ikke kan slukke, du har jo deaktiveret strømstyringen, en dog 2 gangen:

[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=cd9d56c2-9183-447a-811a-00efd1504e77 ro acpi=off noapic nodmraid quiet splash vt.handoff=7

[vovsen]

Derfor får du hele smøren i 'kopi'.

Det var også meningen, men husk at pakke det ind i kode tags når det kommer fra terminalen, på den måde er det lettere at læse og fylder ikke så meget.

Det giver god mening at du ikke kan slukke, du har jo deaktiveret strømstyringen, en dog 2 gangen:

[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=cd9d56c2-9183-447a-811a-00efd1504e77 ro acpi=off noapic nodmraid quiet splash vt.handoff=7

Hvordan ? Er det ved at bruge dette ? [code][/code]
Hvorfor kunne jeg ikke vedhæfte tekstdokumentet ?

Ændringer blev indsat i installationsstartskærmen inden der blev 'startet'. Det har været nødvendigt for overhovedet at få installationen til at trille. Sådan var det også med 14.04 og frem.
Jeg kan genkende, hvad du skriver, men det er ikke noget der 'fjerner' problemet.
Jeg kan ikke ændre noget i Strømstyring.

Indirekte skriver du vel sagtens at jeg skal gå ind i Bootimage og fjerne nogle af parametrene hvis der står noget dér. Det gør der jo nok. Problemet er bare - Hvordan pokker gør man så dét ?

[AJenbo]

Du skal nok identificere præcis hvilken funktion er problemer med istedet for at deaktivere strømforsyningen helt.

Hvis du hade uploades det som en fil ville jeg først skulle hente den og jeg kan ikke se nogen fordel ved det, jeg skulle jo kun se det, ikke gemme det for tid og evighed.

Parametrene kan ændres midlertidigt ved at trykke "e" i GRUB under opstart.

[vovsen]

Du skal nok identificere præcis hvilken funktion er problemer med istedet for at deaktivere strømforsyningen helt.

Hvis du hade uploades det som en fil ville jeg først skulle hente den og jeg kan ikke se nogen fordel ved det, jeg skulle jo kun se det, ikke gemme det for tid og evighed.

Parametrene kan ændres midlertidigt ved at trykke "e" i GRUB under opstart.

Den karrusel kører for hurtigt - jeg er røget totalt af i svinget Jeg bruger bare platformens venlighed som en gammel novice. Kan godt finde ud af at indtaste nogle 'sudo .....' når jeg får at vide hvad der skal stå, men ellers har jeg ikke visum til programmeringslandet.
Kan godt få stoppet bootprocessen med "e" men derefter er det oldgræsk eller russisk for mig.
Aner ikke hvad der kan og skal gøres.
Den med 'nodmraid' mente jeg havde noget med en evt. raidcontroller at gøre og sådan en fætter findes ikke i min maskine. Undrer mig at det skulle slukke for styringen af strømforsyningen - det gjorde det ikke tidligere og heller ikke på min bærbare, der kører fint nok (bare med nogle andre problemer).

[AJenbo]

Det er ikke til en raid controller men et software raid, det er dog de 2 acpi kommandoer der har deaktiveret strømstyringen. Jeg kan ikke rigtig forklarer dig hvad du skal sætte istedet når ikke jeg ved hvorfor du har tilføjet dem

[vovsen]

OK Fint nok Anders. De blev sat med F6 lige inden installationen fordi skærmen gik i sort og alt låste = frøs.
Hvordan kan jeg ændre i GRUB eller Boot_image konfigurationen ???

Kan et nyt installationsforsøg "oven i det nuværende" = reparation eller ??? eventuelt gøre noget ved problemet.

[AJenbo]

Mener du at skræmen for blev sort eller at at computeren låste?
Kan du se om der er nogen aktivitet under opstarten når skærmen er sort (kan du høre harddisken, er der nogle lys der blinker)?
Jeg vil også gerne vide hvilken computer du har.

Lad os først se på hvilket parameter der virker inden vi gøre det permanent i en configurationsfil.
For nu skal du blot have testet hvilken konfiguration der vil give den bedste funktionalitet, og til det er det mest praktisk at trykke e i GRUB (hvis GRUB ikke vises under opstart, så hold venstre shift nede når du tænder computeren) under opstart af computeren, så kan du nemmelig blot genstart for at komme tilbage til den nuværende tilstand hvis det parameter du prøver ikke fungere.

Ved hvert forsøg skal du fjerne følgende fra kommandoen: "acpi=off noapic" og så i stedet indsætte den du tester, for at køre kommandoen trykker du ctrl+x (genvejene står beskrevet på skærmen).

Til den første test syndes jeg blot du skal prøve at fjerne dem og se hvad der sker uden du tilføjer andet.

[AJenbo]

Så vidt jeg kan tyde er der tale om en Medion maskine med et MSI MS-7366 bundkort? I så fald tror jeg der er kommet en BIOS opdatering til maskinen, da det er BIOS som er ansvarlig for ACPI funktionaliteten vil jeg kraftig råde dig til at opdatere denne da dette kan løse problemet helt frem for at vi bruger en masse tid på at deaktivere dele af dit bundkort.

Du kan enten prøve at finde maskinen på Medions side og hente den helt officelle bios der fra.
http://www.medion.com/gb/service/start/

Eller prøve direkte fra bundkort fabrikanten:
https://www.msi.com/Motherboard/support ... #down-bios

[vovsen]

Har været på togt m.m. med Marinehjemmeværnet => godt bombet! ;-D

Fandt ud af at få opgraderet BIOS og derfor måtte en ny installation udføres. Dét blev det ikke meget bedre af.
Det lykkedes at gennemføre en OEM installation, hvor jeg har splittet /home ud på sin egen logiske partition.
Alle partitionerne er af typen ext4 og den primære er brugt som "/".

En spritny 'dmesg' giver følgende:

Kode: Vælg alt

 dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-22-generic (buildd@lgw01-41) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 (Ubuntu 4.4.0-22.40-generic 4.4.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=e3f01636-403d-4c24-8075-cea160f502e1 ro acpi=off plymouth:debug drm.debug=0xe
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbe000-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: MEDIONPC MS-7366/MS-7366, BIOS A7366MLN.40C 01/04/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3380c000-0x35bfdfff]
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048398
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782256 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: nVidia  
[    0.000000] MPTABLE: Product ID: MCP73       
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] Processor #2
[    0.000000] Processor #3
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 4
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffbe000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfffe000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xbfffe000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031994
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=e3f01636-403d-4c24-8075-cea160f502e1 ro acpi=off plymouth:debug drm.debug=0xe
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4005852K/4193592K available (8359K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 187740K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2499.913 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.82 BogoMIPS (lpj=9999652)
[    0.004140] pid_max: default: 32768 minimum: 301
[    0.004231] Security Framework initialized
[    0.004294] Yama: becoming mindful.
[    0.004377] AppArmor: AppArmor initialized
[    0.004791] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009485] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010597] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.010674] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.011092] Initializing cgroup subsys io
[    0.011161] Initializing cgroup subsys memory
[    0.011232] Initializing cgroup subsys devices
[    0.011296] Initializing cgroup subsys freezer
[    0.011360] Initializing cgroup subsys net_cls
[    0.011424] Initializing cgroup subsys perf_event
[    0.011487] Initializing cgroup subsys net_prio
[    0.011551] Initializing cgroup subsys hugetlb
[    0.011616] Initializing cgroup subsys pids
[    0.011702] CPU: Physical Processor ID: 0
[    0.011764] CPU: Processor Core ID: 0
[    0.011825] mce: CPU supports 6 MCE banks
[    0.011894] CPU0: Thermal monitoring enabled (TM2)
[    0.011959] process: using mwait in idle threads
[    0.012015] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.012078] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.012511] Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000)
[    0.014714] ftrace: allocating 31906 entries in 125 pages
[    0.024137] smpboot: Max logical packages: 1
[    0.024206] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.024345] ExtINT not setup in hardware but reported by MP table
[    0.024780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.172020] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q8300  @ 2.50GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.172255] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.172525] ... version:                2
[    0.172585] ... bit width:              40
[    0.172646] ... generic registers:      2
[    0.172707] ... value mask:             000000ffffffffff
[    0.172769] ... max period:             000000007fffffff
[    0.172831] ... fixed-purpose events:   3
[    0.172892] ... event mask:             0000000700000003
[    0.174037] x86: Booting SMP configuration:
[    0.174101] .... node  #0, CPUs:      #1
[    0.008000] microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.180118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.180441]  #2
[    0.008000] microcode: CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.188117]  #3
[    0.008000] microcode: CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.196021] x86: Booted up 1 node, 4 CPUs
[    0.196165] smpboot: Total of 4 processors activated (19999.30 BogoMIPS)
[    0.198501] devtmpfs: initialized
[    0.203304] evm: security.selinux
[    0.203365] evm: security.SMACK64
[    0.203425] evm: security.SMACK64EXEC
[    0.203485] evm: security.SMACK64TRANSMUTE
[    0.203546] evm: security.SMACK64MMAP
[    0.203606] evm: security.ima
[    0.203666] evm: security.capability
[    0.203746] PM: Registering ACPI NVS region [mem 0xbffbe000-0xbffeffff] (204800 bytes)
[    0.204060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.204190] pinctrl core: initialized pinctrl subsystem
[    0.204267] RTC time: 11:04:21, date: 05/23/16
[    0.204470] NET: Registered protocol family 16
[    0.216007] cpuidle: using governor ladder
[    0.228005] cpuidle: using governor menu
[    0.228232] PCI: Using configuration type 1 for base access
[    0.228552] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.228616] mtrr: probably your BIOS does not setup all CPUs.
[    0.228678] mtrr: corrected configuration.
[    0.240093] ACPI: Interpreter disabled.
[    0.240243] vgaarb: loaded
[    0.240417] SCSI subsystem initialized
[    0.240497] libata version 3.00 loaded.
[    0.240497] usbcore: registered new interface driver usbfs
[    0.240497] usbcore: registered new interface driver hub
[    0.240497] usbcore: registered new device driver usb
[    0.240497] PCI: Probing PCI hardware
[    0.240497] PCI: root bus 00: using default resources
[    0.240497] PCI: Probing PCI hardware (bus 00)
[    0.240497] PCI host bridge to bus 0000:00
[    0.240497] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.240497] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.240497] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.240497] pci 0000:00:00.0: [10de:07c7] type 00 class 0x060000
[    0.240573] pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000
[    0.240720] pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000
[    0.240860] pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000
[    0.241000] pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000
[    0.241142] pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000
[    0.241281] pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000
[    0.241423] pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000
[    0.241565] pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000
[    0.241706] pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000
[    0.241848] pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100
[    0.241858] pci 0000:00:03.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.241929] pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500
[    0.241946] pci 0000:00:03.1: reg 0x10: [io  0x4900-0x493f]
[    0.241965] pci 0000:00:03.1: reg 0x20: [io  0x4d00-0x4d3f]
[    0.241972] pci 0000:00:03.1: reg 0x24: [io  0x4e00-0x4e3f]
[    0.241994] pci 0000:00:03.1: PME# supported from D3hot D3cold
[    0.242047] pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000
[    0.242126] pci 0000:00:03.3: [10de:07da] type 00 class 0x0b4000
[    0.242148] pci 0000:00:03.3: reg 0x10: [mem 0xfce80000-0xfcefffff]
[    0.244026] pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000
[    0.244168] pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310
[    0.244182] pci 0000:00:04.0: reg 0x10: [mem 0xfce7f000-0xfce7ffff]
[    0.244220] pci 0000:00:04.0: supports D1 D2
[    0.244222] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244273] pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320
[    0.244290] pci 0000:00:04.1: reg 0x10: [mem 0xfce7ec00-0xfce7ecff]
[    0.244331] pci 0000:00:04.1: supports D1 D2
[    0.244333] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244397] pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300
[    0.244414] pci 0000:00:09.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[    0.244454] pci 0000:00:09.0: PME# supported from D3hot D3cold
[    0.244505] pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401
[    0.244572] pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400
[    0.244603] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244654] pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400
[    0.244685] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244739] pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400
[    0.244770] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244822] pci 0000:00:0e.0: [10de:07f4] type 00 class 0x010601
[    0.244837] pci 0000:00:0e.0: reg 0x10: [io  0xd480-0xd487]
[    0.244842] pci 0000:00:0e.0: reg 0x14: [io  0xd400-0xd403]
[    0.244847] pci 0000:00:0e.0: reg 0x18: [io  0xd080-0xd087]
[    0.244852] pci 0000:00:0e.0: reg 0x1c: [io  0xd000-0xd003]
[    0.244857] pci 0000:00:0e.0: reg 0x20: [io  0xcc00-0xcc0f]
[    0.244863] pci 0000:00:0e.0: reg 0x24: [mem 0xfce7c000-0xfce7dfff]
[    0.244920] pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000
[    0.244936] pci 0000:00:0f.0: reg 0x10: [mem 0xfce77000-0xfce77fff]
[    0.244942] pci 0000:00:0f.0: reg 0x14: [io  0xc880-0xc887]
[    0.244947] pci 0000:00:0f.0: reg 0x18: [mem 0xfce7e800-0xfce7e8ff]
[    0.244953] pci 0000:00:0f.0: reg 0x1c: [mem 0xfce7e400-0xfce7e40f]
[    0.244978] pci 0000:00:0f.0: supports D1 D2
[    0.244980] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.245116] pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode)
[    0.245185] pci 0000:00:0a.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.245187] pci 0000:00:0a.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.245228] pci 0000:02:00.0: [10de:0ca3] type 00 class 0x030000
[    0.245245] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.245255] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.245265] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.245272] pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.245279] pci 0000:02:00.0: reg 0x30: [mem 0xfcf80000-0xfcffffff pref]
[    0.245334] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.245402] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.248016] pci 0000:02:00.1: [10de:0be4] type 00 class 0x040300
[    0.248033] pci 0000:02:00.1: reg 0x10: [mem 0xfcf7c000-0xfcf7ffff]
[    0.256016] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.256083] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.256086] pci 0000:00:0b.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.256091] pci 0000:00:0b.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.256146] pci 0000:03:00.0: [1131:7231] type 00 class 0x048000
[    0.256187] pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[    0.256203] pci 0000:03:00.0: reg 0x18: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.256265] pci 0000:03:00.0: supports D1 D2
[    0.256267] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.264013] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.264081] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe7fffff]
[    0.264141] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010
[    0.264177] pci 0000:04:00.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.264196] pci 0000:04:00.0: reg 0x14: [mem 0xfebff400-0xfebff47f]
[    0.264232] pci 0000:04:00.0: reg 0x20: [mem 0xfebff000-0xfebff07f]
[    0.264246] pci 0000:04:00.0: reg 0x24: [mem 0xfebfec00-0xfebfec7f]
[    0.272013] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.272081] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.272097] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[    0.272128] pci 0000:00:03.0: default IRQ router [10de:07d7]
[    0.272203] PCI: pci_cache_line_size set to 64 bytes
[    0.272286] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.272288] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff]
[    0.272422] NetLabel: Initializing
[    0.272483] NetLabel:  domain hash size = 128
[    0.272544] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.272621] NetLabel:  unlabeled traffic allowed by default
[    0.272706] clocksource: Switched to clocksource refined-jiffies
[    0.282400] AppArmor: AppArmor Filesystem Enabled
[    0.282545] pnp: PnP ACPI: disabled
[    0.284139] pci 0000:00:0a.0: PCI bridge to [bus 01]
[    0.284213] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.284278] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.284349] pci 0000:00:0b.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.284415] pci 0000:00:0b.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.284491] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.284554] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe7fffff]
[    0.284622] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.284685] pci 0000:00:0d.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.284753] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.284755] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.284758] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.284759] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[    0.284761] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.284763] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfdffffff]
[    0.284766] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.284768] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe7fffff]
[    0.284770] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.284806] NET: Registered protocol family 2
[    0.285145] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.285378] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.285680] TCP: Hash tables configured (established 32768 bind 32768)
[    0.285794] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.285890] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.286026] NET: Registered protocol family 1
[    0.286191] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 10
[    0.356028] pci 0000:00:04.1: PCI->APIC IRQ transform: INT B -> IRQ 11
[    0.356145] pci 0000:02:00.0: Video device with shadowed ROM
[    0.356160] PCI: CLS 64 bytes, default 64
[    0.356234] Trying to unpack rootfs image as initramfs...
[    0.997408] Freeing initrd memory: 36808K (ffff88003380c000 - ffff880035bfe000)
[    0.997575] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.997575] software IO TLB [mem 0xbbfb0000-0xbffb0000] (64MB) mapped at [ffff8800bbfb0000-ffff8800bffaffff]
[    0.997575] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.997575] Scanning for low memory corruption every 60 seconds
[    0.997575] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.997575] audit: initializing netlink subsys (disabled)
[    0.997575] audit: type=2000 audit(1464001461.996:1): initialized
[    0.997575] Initialise system trusted keyring
[    0.997634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.000242] zbud: loaded
[    1.000354] VFS: Disk quotas dquot_6.6.0
[    1.000354] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.000977] fuse init (API version 7.23)
[    1.000977] Key type big_key registered
[    1.000977] Allocating IMA MOK and blacklist keyrings.
[    1.000977] Key type asymmetric registered
[    1.000977] Asymmetric key parser 'x509' registered
[    1.000977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.000977] io scheduler noop registered
[    1.000977] io scheduler deadline registered (default)
[    1.000977] io scheduler cfq registered
[    1.000977] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.000977] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.000977] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    1.000977] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.000977] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.000977] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.000977] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.000977] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.001026] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.001091] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.001098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.001167] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.001273] intel_idle: does not run on family 6 model 23
[    1.004152] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.004152] Linux agpgart interface v0.103
[    1.008242] brd: module loaded
[    1.012106] loop: module loaded
[    1.012455] libphy: Fixed MDIO Bus: probed
[    1.012519] tun: Universal TUN/TAP device driver, 1.6
[    1.012581] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.012666] PPP generic driver version 2.4.2
[    1.012666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.012666] ehci-pci: EHCI PCI platform driver
[    1.012666] ehci-pci 0000:00:04.1: PCI->APIC IRQ transform: INT B -> IRQ 11
[    1.012666] ehci-pci 0000:00:04.1: EHCI Host Controller
[    1.012666] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    1.012666] ehci-pci 0000:00:04.1: debug port 1
[    1.012666] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    1.012666] ehci-pci 0000:00:04.1: irq 11, io mem 0xfce7ec00
[    1.024054] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    1.024167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.024232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.024314] usb usb1: Product: EHCI Host Controller
[    1.024376] usb usb1: Manufacturer: Linux 4.4.0-22-generic ehci_hcd
[    1.024440] usb usb1: SerialNumber: 0000:00:04.1
[    1.024557] hub 1-0:1.0: USB hub found
[    1.024557] hub 1-0:1.0: 10 ports detected
[    1.024557] ehci-platform: EHCI generic platform driver
[    1.024557] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.024598] ohci-pci: OHCI PCI platform driver
[    1.024675] ohci-pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 10
[    1.024751] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    1.024818] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.024914] ohci-pci 0000:00:04.0: irq 10, io mem 0xfce7f000
[    1.082080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.082146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.082219] usb usb2: Product: OHCI PCI host controller
[    1.082282] usb usb2: Manufacturer: Linux 4.4.0-22-generic ohci_hcd
[    1.082345] usb usb2: SerialNumber: 0000:00:04.0
[    1.082457] hub 2-0:1.0: USB hub found
[    1.082457] hub 2-0:1.0: 10 ports detected
[    1.082457] ohci-platform: OHCI generic platform driver
[    1.082457] uhci_hcd: USB Universal Host Controller Interface driver
[    1.082457] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.084150] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.084229] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.084399] mousedev: PS/2 mouse device common for all mice
[    1.084399] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.084399] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.084399] i2c /dev entries driver
[    1.084399] device-mapper: uevent: version 1.0.3
[    1.084471] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.084471] ledtrig-cpu: registered to indicate activity on CPUs
[    1.084471] NET: Registered protocol family 10
[    1.084667] NET: Registered protocol family 17
[    1.084667] Key type dns_resolver registered
[    1.084667] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.084667] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.084665] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.084667] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[    1.084667] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.084667] registered taskstats version 1
[    1.084667] Loading compiled-in X.509 certificates
[    1.089067] Loaded X.509 cert 'Build time autogenerated kernel key: 10281ca0c0463cd0680138fff55319c9bd7d63b8'
[    1.089173] zswap: loaded using pool lzo/zbud
[    1.089270] Key type trusted registered
[    1.092885] Key type encrypted registered
[    1.092885] AppArmor: AppArmor sha1 policy hashing enabled
[    1.092885] ima: No TPM chip found, activating TPM-bypass!
[    1.092885] evm: HMAC attrs: 0x1
[    1.092885]   Magic number: 0:401:75
[    1.092885] rtc_cmos rtc_cmos: setting system clock to 2016-05-23 11:04:22 UTC (1464001462)
[    1.096060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.096125] EDD information not available.
[    1.096258] PM: Hibernation image not present or could not be loaded.
[    1.097915] Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000)
[    1.097991] Write protecting the kernel read-only data: 14336k
[    1.098970] Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000)
[    1.099600] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[    1.112163] random: systemd-udevd urandom read with 2 bits of entropy available
[    1.147687] [drm] Initialized drm 1.1.0 20060810
[    1.150874] ahci 0000:00:0e.0: version 3.0
[    1.150892] ahci 0000:00:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 5
[    1.150993] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[    1.151063] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
[    1.151197] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.151276] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio 
[    1.152048] firewire_ohci 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 7
[    1.152048] firewire_ohci 0000:04:00.0: overriding IsoXmitIntMask
[    1.158991] scsi host0: ahci
[    1.159222] scsi host1: ahci
[    1.160177] scsi host2: ahci
[    1.165384] scsi host3: ahci
[    1.165384] ata1: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c100 irq 5
[    1.165384] ata2: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c180 irq 5
[    1.165384] ata3: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c200 irq 5
[    1.165384] ata4: SATA max UDMA/133 abar m8192@0xfce7c000 port 0xfce7c280 irq 5
[    1.165384] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.168521] forcedeth 0000:00:0f.0: PCI->APIC IRQ transform: INT A -> IRQ 7
[    1.216104] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    1.233161] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 40:61:86:34:f1:52
[    1.233238] forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.233391] forcedeth 0000:00:0f.0 enp0s15: renamed from eth0
[    1.336075] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.468085] usb 1-1: New USB device found, idVendor=174c, idProduct=55aa
[    1.468150] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.468217] usb 1-1: Product: MEDION HDDrive-n-GO
[    1.468285] usb 1-1: Manufacturer: MEDION
[    1.468346] usb 1-1: SerialNumber: 3170000000000000412C
[    1.473199] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.473286] usb-storage 1-1:1.0: Quirks match for vid 174c pid 55aa: 400000
[    1.473286] scsi host4: usb-storage 1-1:1.0
[    1.473286] usbcore: registered new interface driver usb-storage
[    1.473851] usbcore: registered new interface driver uas
[    1.484086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.484179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.484100] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100
[    1.488084] ata3: SATA link down (SStatus 0 SControl 300)
[    1.488086] ata4: SATA link down (SStatus 0 SControl 300)
[    1.488160] ata2.00: configured for UDMA/100
[    1.492083] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[    1.492155] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.492225] ata1.00: configured for UDMA/133
[    1.496151] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
[    1.496216] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.496303] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.496368] sd 0:0:0:0: [sda] Write Protect is off
[    1.496368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.496368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.496368] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL01 PQ: 0 ANSI: 5
[    1.520106] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.520161] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.524138] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.524203] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.528093]  sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[    1.528206] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.636103] usb 1-4: new high-speed USB device number 4 using ehci-pci
[    1.716181] firewire_core 0000:04:00.0: created device fw0: GUID 019c73640010dc00, S400
[    1.768129] usb 1-4: New USB device found, idVendor=0424, idProduct=2514
[    1.768180] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.768303] hub 1-4:1.0: USB hub found
[    1.768303] hub 1-4:1.0: 4 ports detected
[    1.824351] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    1.880114] usb 1-5: new high-speed USB device number 5 using ehci-pci
[    1.996116] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2408e784477, max_idle_ns: 440795228720 ns
[    1.996214] clocksource: Switched to clocksource tsc
[    2.008829] usb 1-5: New USB device found, idVendor=0424, idProduct=2602
[    2.008901] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.009242] hub 1-5:1.0: USB hub found
[    2.009450] hub 1-5:1.0: 4 ports detected
[    2.042398] usb 2-3: New USB device found, idVendor=04f2, idProduct=0200
[    2.042468] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.042535] usb 2-3: Product: USB Wireless HID Receiver
[    2.042599] usb 2-3: Manufacturer: Chicony
[    2.049317] hidraw: raw HID events driver (C) Jiri Kosina
[    2.089624] usbcore: registered new interface driver usbhid
[    2.089693] usbhid: USB HID core driver
[    2.091759] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/0003:04F2:0200.0001/input/input3
[    2.144645] hid-generic 0003:04F2:0200.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input0
[    2.150475] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/0003:04F2:0200.0002/input/input4
[    2.206288] hid-generic 0003:04F2:0200.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input1
[    2.206588] input: Chicony USB Wireless HID Receiver as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.2/0003:04F2:0200.0003/input/input5
[    2.206777] hid-generic 0003:04F2:0200.0003: input,hidraw2: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:04.0-3/input2
[    2.282204] usb 1-5.1: new high-speed USB device number 7 using ehci-pci
[    2.436566] usb 2-8: new low-speed USB device number 3 using ohci-pci
[    2.468564] raid6: sse2x1   gen()  4438 MB/s
[    2.472989] scsi 4:0:0:0: Direct-Access     ASMT     2105             0    PQ: 0 ANSI: 6
[    2.536565] raid6: sse2x1   xor()  4211 MB/s
[    2.604572] raid6: sse2x2   gen()  5938 MB/s
[    2.647413] usb 2-8: New USB device found, idVendor=04d9, idProduct=0499
[    2.647479] usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.662824] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:04.0/usb2/2-8/2-8:1.0/0003:04D9:0499.0004/input/input6
[    2.663029] hid-generic 0003:04D9:0499.0004: input,hidraw3: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:04.0-8/input0
[    2.672579] raid6: sse2x2   xor()  5131 MB/s
[    2.740584] raid6: sse2x4   gen()  7344 MB/s
[    2.808589] raid6: sse2x4   xor()  5705 MB/s
[    2.808652] raid6: using algorithm sse2x4 gen() 7344 MB/s
[    2.808714] raid6: .... xor() 5705 MB/s, rmw enabled
[    2.808776] raid6: using ssse3x2 recovery algorithm
[    2.809193] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.810450] xor: measuring software checksum speed
[    2.811233] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.811309] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    2.813853] sd 4:0:0:0: [sdb] Write Protect is off
[    2.813917] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    2.815854] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.821364]  sdb: sdb1
[    2.827855] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.848598]    prefetch64-sse: 10307.000 MB/sec
[    2.862350] usb 1-5.1: New USB device found, idVendor=0424, idProduct=2228
[    2.862424] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.862498] usb 1-5.1: Product: Flash Card Reader USB2.0
[    2.862561] usb 1-5.1: Manufacturer: Generic
[    2.862623] usb 1-5.1: SerialNumber: 000026022601
[    2.862882] usb-storage 1-5.1:1.0: USB Mass Storage device detected
[    2.863174] scsi host5: usb-storage 1-5.1:1.0
[    2.888606]    generic_sse:  9131.000 MB/sec
[    2.888669] xor: using function: prefetch64-sse (10307.000 MB/sec)
[    2.905705] Btrfs loaded
[    2.950259] usb 1-5.2: new high-speed USB device number 8 using ehci-pci
[    3.061103] usb 1-5.2: New USB device found, idVendor=13d3, idProduct=3306
[    3.061175] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.061250] usb 1-5.2: Product: RTL8191S WLAN Adapter 
[    3.061319] usb 1-5.2: Manufacturer: Manufacturer Realtek 
[    3.061382] usb 1-5.2: SerialNumber: 00e04c000001
[    3.134287] usb 1-5.3: new low-speed USB device number 9 using ehci-pci
[    3.247110] usb 1-5.3: New USB device found, idVendor=0bc7, idProduct=0006
[    3.247181] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.247256] usb 1-5.3: Product: RF receiver
[    3.247324] usb 1-5.3: Manufacturer: X10 WTI
[    3.270995] random: nonblocking pool is initialized
[    3.634975] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.873176] scsi 5:0:0:0: Direct-Access     Generic  Flash HS-CF      5.42 PQ: 0 ANSI: 0
[    3.877780] scsi 5:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   5.42 PQ: 0 ANSI: 0
[    3.881765] scsi 5:0:0:2: Direct-Access     Generic  Flash HS-SM      5.42 PQ: 0 ANSI: 0
[    3.882232] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    3.882495] sd 5:0:0:1: Attached scsi generic sg4 type 0
[    3.882768] sd 5:0:0:2: Attached scsi generic sg5 type 0
[    3.899013] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    3.903631] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[    3.907887] sd 5:0:0:2: [sde] Attached SCSI removable disk
[    4.419902] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.420154] systemd[1]: Detected architecture x86-64.
[    4.442999] systemd[1]: Set hostname to <em>.
[    5.960212] systemd[1]: Reached target Remote File Systems (Pre).
[    5.960723] systemd[1]: Reached target Remote File Systems.
[    5.961158] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.961590] systemd[1]: Listening on udev Kernel Socket.
[    5.962021] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.966011] systemd[1]: Listening on Journal Socket.
[    5.966432] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.966969] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.967534] systemd[1]: Created slice System Slice.
[    5.980405] systemd[1]: Starting Uncomplicated firewall...
[    6.055870] systemd[1]: Created slice system-getty.slice.
[    6.056426] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.068188] systemd[1]: Started Read required files in advance.
[    6.069591] systemd[1]: Mounting POSIX Message Queue File System...
[    6.070720] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.071169] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.072379] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.072916] systemd[1]: Created slice User and Session Slice.
[    6.073374] systemd[1]: Reached target Slices.
[    6.073868] systemd[1]: Listening on Syslog Socket.
[    6.074314] systemd[1]: Listening on udev Control Socket.
[    6.074733] systemd[1]: Reached target User and Group Name Lookups.
[    6.075194] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.127767] systemd[1]: Starting Load Kernel Modules...
[    6.128297] systemd[1]: Listening on Journal Audit Socket.
[    6.129400] systemd[1]: Mounting Debug File System...
[    6.129843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.130314] systemd[1]: Reached target Encrypted Volumes.
[    6.131498] systemd[1]: Mounting Huge Pages File System...
[    6.132865] systemd[1]: Started Braille Device Support.
[    6.134188] systemd[1]: Starting Journal Service...
[    6.134728] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.137559] systemd[1]: Started Uncomplicated firewall.
[    6.182360] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.192045] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.436099] systemd[1]: Started Journal Service.
[    6.743342] lp: driver loaded but no devices found
[    6.779838] ppdev: user-space parallel port driver
[    7.689080] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.730526] systemd-journald[284]: Received request to flush runtime journal from PID 1
[    8.183781] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[    8.183848] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[    8.391830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.615288] snd_hda_intel 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 7
[    8.615297] snd_hda_intel 0000:00:09.0: Disabling MSI
[    8.615384] snd_hda_intel 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 10
[    8.615389] snd_hda_intel 0000:02:00.1: Disabling MSI
[    8.615398] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[    9.457670] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input7
[    9.457938] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input8
[    9.458160] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input9
[    9.458347] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:02:00.1/sound/card1/input10
[    9.515081] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.515086] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.515088] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.515090] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.515092] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    9.515094] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.515097] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    9.515100] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    9.515102] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    9.515104] snd_hda_codec_realtek hdaudioC0D0:      Aux=0x1c
[   10.185019] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[   10.185807] r8712u: register rtl8712_netdev_ops to netdev_ops
[   10.185813] usb 1-5.2: r8712u: USB_SPEED_HIGH with 4 endpoints
[   10.186305] usb 1-5.2: r8712u: Boot from EFUSE: Autoload OK
[   10.465445] Registered IR keymap rc-medion-x10-or2x
[   10.465579] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/rc/rc0/input11
[   10.465667] rc0: X10 WTI RF receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/rc/rc0
[   10.465727] input: X10 WTI RF receiver mouse as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5.3/1-5.3:1.0/input/input12
[   10.465845] usbcore: registered new interface driver ati_remote
[   10.467621] Adding 9764860k swap on /dev/sda5.  Priority:-1 extents:1 across:9764860k FS
[   10.574943] usb 1-5.2: r8712u: CustomerID = 0x0000
[   10.574949] usb 1-5.2: r8712u: MAC Address from efuse = 1c:4b:d6:28:47:c8
[   10.574953] usb 1-5.2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[   10.575007] usbcore: registered new interface driver r8712u
[   10.951832] r8712u 1-5.2:1.0 wlx1c4bd62847c8: renamed from wlan0
[   11.515748] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input13
[   11.515833] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input14
[   11.515912] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input15
[   11.515987] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input16
[   11.516060] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input17
[   11.516133] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input18
[   11.516203] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input19
[   11.516275] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input20
[   11.871000] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   14.198605] audit: type=1400 audit(1464001475.600:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=655 comm="apparmor_parser"
[   14.198619] audit: type=1400 audit(1464001475.600:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=655 comm="apparmor_parser"
[   14.198627] audit: type=1400 audit(1464001475.600:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=655 comm="apparmor_parser"
[   14.198633] audit: type=1400 audit(1464001475.600:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=655 comm="apparmor_parser"
[   14.203348] audit: type=1400 audit(1464001475.608:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=658 comm="apparmor_parser"
[   14.208716] audit: type=1400 audit(1464001475.612:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=654 comm="apparmor_parser"
[   14.208731] audit: type=1400 audit(1464001475.612:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=654 comm="apparmor_parser"
[   14.213343] audit: type=1400 audit(1464001475.616:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=661 comm="apparmor_parser"
[   14.213357] audit: type=1400 audit(1464001475.616:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=661 comm="apparmor_parser"
[   14.213364] audit: type=1400 audit(1464001475.616:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=661 comm="apparmor_parser"
[   20.531031] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   21.250875] r8712u 1-5.2:1.0 wlx1c4bd62847c8: 1 RCR=0x153f00e
[   21.251613] r8712u 1-5.2:1.0 wlx1c4bd62847c8: 2 RCR=0x553f00e
[   21.359538] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   21.361860] cfg80211: World regulatory domain updated:
[   21.361863] cfg80211:  DFS Master region: unset
[   21.361865] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.361867] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.361869] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.361871] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.361874] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   21.361876] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   21.361878] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.361880] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.361882] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   22.484038] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
[   22.484592] forcedeth 0000:00:0f.0 enp0s15: MSI enabled
[   24.394170] IPv6: ADDRCONF(NETDEV_UP): wlx1c4bd62847c8: link is not ready
[   47.289893] snd_hda_intel 0000:02:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   47.912085] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  103.753609] perf interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  169.973507] perf interrupt took too long (5033 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[  397.881627] perf interrupt took too long (10002 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
[ 1345.382405] usb 1-5.3: Weird key 14 9f ff f0
[ 1345.686407] usb 1-5.3: Weird key 14 3f ff f0
[ 2864.673925] usb 1-5.3: Weird key 14 92 43 60
[ 3205.387368] usb 1-5.3: Weird key 14 f9 ff f0
[ 4662.976468] usb 1-5.3: Weird key 14 ff ff f0
[ 5065.694844] usb 1-5.3: Weird data, len=5 20 ff fe 54 bf 00 ...
[ 5530.668598] usb 1-5.3: Weird key 14 ff f7 f0
[ 6150.249176] usb 1-5.3: Weird key 14 52 7f b0
[ 6305.925026] usb 1-5.3: Weird key 14 a2 11 30
[ 6615.337147] usb 1-5.3: Weird key 14 ff fb f0
[ 8134.633615] usb 1-5.3: Weird key 14 ff fb f0
[ 9265.680517] usb 1-5.3: Weird key 14 e1 2a 20

Under 'opstarten' viser skærmen samtlige kommandoer m.m. Det kan jeg ikke nå at bruge til noget.
Ved afslutning kan jeg, som foreslået, trykke tre sekunder på 'knappen', men det er nemmere blot at slukke for strømmen.

Skærmen er nu holdt op med at lave 'sjove mærkværdigheder', og musen blafrer ikke så meget rundt i fri dressur.

[vovsen]

Blev MEGET træt af alt bøvlet med den nye version, hvorfor jeg er gået tilbage til 15.10, der virker.

[AJenbo]

15.10 udløber i løbet af måneden. Måske bedre at hoppe tilbage til 14.04 i stedet hvis ikke du kan forenes med 16.04. Hvad er det for nogle problemer du oplever?