VPN til Ubuntu 14.04

[cali1]

Er der nogen der har en VPN opsætning til 14.04, har ledt meget på nettet, men uden held. Mange oplyser at de ikke kan benytte VPN på 14.04, omend det har kørt upåklageligt på tidligere versioner.

På forhånd tak.

[AJenbo]

Skal du logget ind på et VPN, hvilket? Eller skal du have Ubuntu til at fungere som en VPN server?

[Claus Henriksen]

Ellers kan jeg meddele at de meget anvendte Cisco løsninger er understøttet af pakkerne network-manager-vpnc-gnome og network-manager-openconnect-gnome.
Når disse er installeret kan du konfigure dem ved netværks ikonet i notifikationspanelet.

[cali1]

Privateinternetaccess hedder den - opskriften til 12.04 er her:

Ubuntu Linux 12.04: OpenVPN via Network Manager Setup
Open a Terminal, and run: sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome. This will prompt for both your password, and a Y/n answer, please provide it with your password, and Y
Once installed, open System Settings, then Network
Press the + symbol to add a new connection, and select the VPN Interface, then press Create
Choose OpenVPN as your VPN Connection Type, and press Create
The following will walk you though all configuration steps needed for the PIA VPN.
Gateway: Select one of the Hostnames provided on the NETWORK PAGE
Authentication
Type: Password
Username: The username provided with the PIA account
Password: The password provided with the PIA account
CA Certificate: Downloaded this ZIP FILE and extract the ca.crt file to somewhere it won't be deleted. We suggest your Home folder. If you extract this to your home folder, when searching for it, please click on your username on the left side, which will take you right to the home folder, then select the ca.crt file from the options on the right.
Advanced: Under the general tab, check the Use LZO data compression
IPv4 Settings:
Method: Automatic (VPN) Addresses Only
Press Save. If you chose to have your password saved it may ask for you to verify your password to open your keyring.


Synes det gik godt med opsætningen indtil: Advanced: Under the general tab, check the Use LZO data compression - den kunne jeg ikke finde.

Håber i kan hjælpe mig lidt - på forhånd tak.

[AJenbo]

LZO er kun for at det går hurtigere så det punkt kan du springe over