ingen grafik-drivere

[zob]

Måske også output af

Kode: Vælg alt

xrandr

Kode: Vælg alt

dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'

Kode: Vælg alt

cat /var/log/Xorg.0.log | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'

[Klaus Rasmussen]

dmesg

Kode: Vælg alt

[    0.311070] msgmni has been set to 1661
[    0.311809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.311865] io scheduler noop registered
[    0.311870] io scheduler deadline registered
[    0.311885] io scheduler cfq registered (default)
[    0.312265] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.312315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.312662] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.312677] ACPI: Sleep Button [SLPB]
[    0.312789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.312798] ACPI: Power Button [PWRF]
[    0.316133] ERST: Table is not found!
[    0.316138] GHES: HEST is not enabled!
[    0.316384] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.336747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.336845] isapnp: Scanning for PnP cards...
[    0.689888] Freeing initrd memory: 13872k freed
[    0.690985] isapnp: No Plug & Play device found
[    0.752533] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.764387] Linux agpgart interface v0.103
[    0.764654] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.767853] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    0.770496] brd: module loaded
[    0.771840] loop: module loaded
[    0.772150] ata_piix 0000:00:1f.1: version 2.13
[    0.772169] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.772180] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.772242] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.772785] scsi0 : ata_piix
[    0.772936] scsi1 : ata_piix
[    0.774124] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.774129] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.774171] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.774180] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.774259] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.774705] scsi2 : ata_piix
[    0.774839] scsi3 : ata_piix
[    0.775931] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.775936] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.776693] Fixed MDIO Bus: probed
[    0.776730] tun: Universal TUN/TAP device driver, 1.6
[    0.776733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.776841] PPP generic driver version 2.4.2
[    0.777051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.777081] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.777111] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.777117] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.777200] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.777241] ehci_hcd 0000:00:1d.7: debug port 1
[    0.781124] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.781148] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[    0.796025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.796272] hub 1-0:1.0: USB hub found
[    0.796280] hub 1-0:1.0: 8 ports detected
[    0.796417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.796441] uhci_hcd: USB Universal Host Controller Interface driver
[    0.796474] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.796486] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.796491] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.796579] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.796620] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[    0.796840] hub 2-0:1.0: USB hub found
[    0.796848] hub 2-0:1.0: 2 ports detected
[    0.796954] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.796964] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.796968] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.797047] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.797083] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    0.797300] hub 3-0:1.0: USB hub found
[    0.797306] hub 3-0:1.0: 2 ports detected
[    0.797416] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.797426] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.797431] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.797507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.797533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.797748] hub 4-0:1.0: USB hub found
[    0.797755] hub 4-0:1.0: 2 ports detected
[    0.797853] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.797867] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.797872] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.797956] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.797982] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[    0.798194] hub 5-0:1.0: USB hub found
[    0.798201] hub 5-0:1.0: 2 ports detected
[    0.798386] usbcore: registered new interface driver libusual
[    0.798466] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.801741] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.801753] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.801985] mousedev: PS/2 mouse device common for all mice
[    0.802258] rtc_cmos 00:02: RTC can wake from S4
[    0.802396] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.802423] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.802519] device-mapper: uevent: version 1.0.3
[    0.802648] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.802684] EISA: Probing bus 0 at eisa.0
[    0.802725] EISA: Detected 0 cards.
[    0.802741] cpufreq-nforce2: No nForce2 chipset.
[    0.802745] cpuidle: using governor ladder
[    0.802749] cpuidle: using governor menu
[    0.802752] EFI Variables Facility v0.08 2004-May-17
[    0.803176] TCP cubic registered
[    0.803364] NET: Registered protocol family 10
[    0.804338] NET: Registered protocol family 17
[    0.804346] Registering the dns_resolver key type
[    0.804379] Using IPI No-Shortcut mode
[    0.804573] PM: Hibernation image not present or could not be loaded.
[    0.804595] registered taskstats version 1
[    0.816036]   Magic number: 2:808:642
[    0.816155] rtc_cmos 00:02: setting system clock to 2014-02-06 17:38:46 UTC (1391708326)
[    0.816186] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.816189] EDD information not available.
[    0.943120] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33
[    0.948567] ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
[    0.948573] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.956239] ata2.00: configured for UDMA/33
[    0.956595] ata3.00: configured for UDMA/133
[    0.959244] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5
[    0.964398] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.964403] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.964622] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.964811] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    0.965053] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
[    0.965266] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    0.965331] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.965402] sd 2:0:0:0: [sda] Write Protect is off
[    0.965409] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.965476] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.979399]  sda: sda2 < sda5 sda6 >
[    0.979934] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.980031] Freeing unused kernel memory: 744k freed
[    0.980800] Write protecting the kernel text: 5844k
[    0.980833] Write protecting the kernel read-only data: 2388k
[    1.012567] udevd[93]: starting version 175
[    1.175389] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.175399] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.175480] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.175498] e1000 0000:02:01.0: setting latency timer to 64
[    1.201992] Floppy drive(s): fd0 is 1.44M
[    1.218032] FDC 0 is a National Semiconductor PC87306
[    1.223047] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.268099] Refined TSC clocksource calibration: 2992.499 MHz.
[    1.268112] Switching to clocksource tsc
[    1.276452] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.333216] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[    1.443978] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.468361] Initializing USB Mass Storage driver...
[    1.468543] scsi4 : usb-storage 1-4:1.0
[    1.468705] usbcore: registered new interface driver usb-storage
[    1.468710] USB Mass Storage support registered.
[    1.610631] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:13:20:3a:9d:9c
[    1.610643] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.704040] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.776182] firewire_core: created device fw0: GUID 00132000003a9d9c, S400
[    2.120030] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[    2.470950] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S224Q  TS02 PQ: 0 ANSI: 0
[    2.476048] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.476257] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    2.476392] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    2.536044] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.708869] hub 3-1:1.0: USB hub found
[    2.710812] hub 3-1:1.0: 4 ports detected
[    2.993775] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[    3.097758] usb 3-1.1: not running at top speed; connect to a high speed hub
[   15.810273] Adding 2618364k swap on /dev/sda5.  Priority:-1 extents:1 across:2618364k 
[   15.824902] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.857889] udevd[312]: starting version 175
[   15.908626] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   15.927053] lp: driver loaded but no devices found
[   15.935555] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.125719] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.446976] ppdev: user-space parallel port driver
[   16.451637] Bluetooth: Core ver 2.16
[   16.451711] NET: Registered protocol family 31
[   16.451718] Bluetooth: HCI device and connection manager initialized
[   16.451724] Bluetooth: HCI socket layer initialized
[   16.451730] Bluetooth: L2CAP socket layer initialized
[   16.451743] Bluetooth: SCO socket layer initialized
[   16.460484] parport_pc 00:07: reported by Plug and Play ACPI
[   16.460540] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.464820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.464829] Bluetooth: BNEP filters: protocol multicast
[   16.466053] Bluetooth: RFCOMM TTY layer initialized
[   16.466068] Bluetooth: RFCOMM socket layer initialized
[   16.466074] Bluetooth: RFCOMM ver 1.11
[   16.478845] type=1400 audit(1391708342.157:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=525 comm="apparmor_parser"
[   16.556667] lp0: using parport0 (interrupt-driven).
[   16.595155] type=1400 audit(1391708342.273:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=574 comm="apparmor_parser"
[   16.603410] type=1400 audit(1391708342.281:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=574 comm="apparmor_parser"
[   16.672188] type=1400 audit(1391708342.353:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=603 comm="apparmor_parser"
[   16.675861] type=1400 audit(1391708342.353:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser"
[   16.677917] intel_rng: FWH not detected
[   16.678347] type=1400 audit(1391708342.357:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser"
[   16.808595] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[   16.809046] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1/input0
[   16.835024] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[   16.836367] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-2/input0
[   16.842086] cfg80211: Calling CRDA to update world regulatory domain
[   16.863539] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.863588] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   16.900243] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[   16.902578] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
[   16.902629] usbcore: registered new interface driver usblp
[   16.902803] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-2/input1
[   16.902847] usbcore: registered new interface driver usbhid
[   16.902852] usbhid: USB HID core driver
[   17.002172] ath9k 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.236167] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.667680] intel8x0_measure_ac97_clock: measured 76111 usecs (3663 samples)
[   17.667686] intel8x0: clocking to 48000
[   17.680962] init: failsafe main process (684) killed by TERM signal
[   18.096667] type=1400 audit(1391708343.777:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=800 comm="apparmor_parser"
[   18.097465] type=1400 audit(1391708343.777:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=800 comm="apparmor_parser"
[   18.105011] type=1400 audit(1391708343.785:10): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=799 comm="apparmor_parser"
[   18.113637] type=1400 audit(1391708343.793:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[   18.184882] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   18.188448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[   18.330358] cfg80211: World regulatory domain updated:
[   18.330365] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.330372] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.330378] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.330383] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.330388] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.330394] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.567108] ath: EEPROM regdomain: 0x809c
[   18.567115] ath: EEPROM indicates we should expect a country code
[   18.567120] ath: doing EEPROM country->regdmn map search
[   18.567125] ath: country maps to regdmn code: 0x52
[   18.567130] ath: Country alpha2 being used: CN
[   18.567134] ath: Regpair used: 0x52
[   18.567469] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.567478] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567484] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.567489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567495] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.567502] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567508] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.567515] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567520] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.567526] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567531] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.567537] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567543] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.567549] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567555] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.567562] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567567] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.567573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567578] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.567583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567588] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.567594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567599] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.567604] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.567610] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.570952] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.570960] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570966] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.570973] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570978] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.570985] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570990] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.570996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571001] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.571007] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571012] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.571019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571024] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.571030] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571035] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.571041] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571046] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.571052] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571057] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.571063] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571069] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.571075] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571080] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.571087] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.571092] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.571098] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.571103] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.571109] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.583695] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.586573] cfg80211: Calling CRDA for country: CN
[   18.587947] Registered led device: ath9k-phy0
[   18.587965] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf87c0000, irq=17
[   18.634100] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.634111] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634117] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.634124] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634129] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.634136] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634142] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.634151] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634158] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.634165] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634172] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.634179] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634184] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.634192] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634198] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.634205] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634211] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.634218] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634225] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.634232] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634238] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.634244] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634250] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.634257] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634263] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.634269] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634274] cfg80211: Disabling freq 2484 MHz
[   18.634282] cfg80211: Regulatory domain changed to country: CN
[   18.634286] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.634293] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.634299] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   18.755933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.756755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.811085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.818776] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.933588] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   18.933594] vesafb: scrolling: redraw
[   18.933600] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   18.934798] vesafb: framebuffer at 0xe0000000, mapped to 0xf8a80000, using 1216k, total 1216k
[   18.942213] Console: switching to colour frame buffer device 80x30
[   18.942246] fb0: VESA VGA frame buffer device
[   19.480828] init: lightdm main process (1048) killed by TERM signal
[   19.792541] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   19.792551] Disabling lock debugging due to kernel taint
[   20.803115] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   20.804271] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[   20.804278] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[   21.518030] wlan0: authenticate with e0:69:95:1c:e8:85 (try 1)
[   21.520180] wlan0: authenticated
[   21.542625] wlan0: associate with e0:69:95:1c:e8:85 (try 1)
[   21.546582] wlan0: RX AssocResp from e0:69:95:1c:e8:85 (capab=0x411 status=0 aid=2)
[   21.546594] wlan0: associated
[   21.558883] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.947061] audit_printk_skb: 123 callbacks suppressed
[   26.947069] type=1400 audit(1391708352.625:53): apparmor="ALLOWED" operation="open" parent=869 profile="/usr/sbin/dnsmasq" name="/etc/NetworkManager/dnsmasq.d/" pid=1644 comm="dnsmasq" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   31.648023] wlan0: no IPv6 routers present
[ 2305.820732] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 2305.820742] Pid: 0, comm: swapper/0 Tainted: P           O 3.2.0-58-generic-pae #88-Ubuntu
[ 2305.820746] Call Trace:
[ 2305.820759]  [<c15961eb>] ? printk+0x2d/0x2f
[ 2305.820769]  [<c10c1679>] __report_bad_irq+0x29/0xd0
[ 2305.820774]  [<c10c1a34>] note_interrupt+0x104/0x150
[ 2305.820780]  [<c101901d>] ? mwait_idle+0x7d/0x1d0
[ 2305.820785]  [<c10bf8ee>] handle_irq_event_percpu+0x9e/0x1f0
[ 2305.820793]  [<c1036a38>] ? default_spin_lock_flags+0x8/0x10
[ 2305.820799]  [<c102dbc0>] ? unmask_ioapic+0x50/0x60
[ 2305.820803]  [<c10bfa7b>] handle_irq_event+0x3b/0x60
[ 2305.820808]  [<c10c2240>] ? unmask_irq+0x30/0x30
[ 2305.820813]  [<c10c228e>] handle_fasteoi_irq+0x4e/0xd0
[ 2305.820816]  <IRQ>  [<c15b3ad2>] ? do_IRQ+0x42/0xc0
[ 2305.820826]  [<c15b3930>] ? common_interrupt+0x30/0x38
[ 2305.820833]  [<c14800e0>] ? centrino_target+0xc0/0x300
[ 2305.820837]  [<c101901d>] ? mwait_idle+0x7d/0x1d0
[ 2305.820843]  [<c1010898>] ? cpu_idle+0xa8/0xd0
[ 2305.820848]  [<c1578d65>] ? rest_init+0x5d/0x68
[ 2305.820855]  [<c188077c>] ? start_kernel+0x352/0x358
[ 2305.820860]  [<c18803bb>] ? pass_bootoption.constprop.2+0xe2/0xe2
[ 2305.820865]  [<c18800ba>] ? i386_start_kernel+0xa9/0xaf
[ 2305.820868] handlers:
[ 2305.820872] [<c1413520>] usb_hcd_irq
[ 2305.820876] [<c1413520>]

Den er så lang at starten ikke er med.

xrandr:

Kode: Vælg alt

klaus@klaus-desktop:~$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
   1280x1024       0.0* 
   1152x864        0.0  
   1024x768        0.0  
   800x600         0.0  
   640x480         0.0  
   720x400         0.0  
klaus@klaus-desktop:~$ 

dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)':

Kode: Vælg alt

klaus@klaus-desktop:~$     dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.764654] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.767853] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   15.908626] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   16.677917] intel_rng: FWH not detected
[   16.863539] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.863588] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   17.236167] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.667680] intel8x0_measure_ac97_clock: measured 76111 usecs (3663 samples)
[   17.667686] intel8x0: clocking to 48000
[   17.680962] init: failsafe main process (684) killed by TERM signal
[   18.942246] fb0: VESA VGA frame buffer device
[   19.792541] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   20.803115] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   20.804271] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[   20.804278] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 9351.367528] [<f877aa00>] snd_intel8x0_interrupt
klaus@klaus-desktop:~$ 

[AJenbo]

Det ser ud til at du har fglrx installeret selv om du ikke har et kort der er undersøttet, prøv at fjern den med følgende kommando:

Kode: Vælg alt

sudo apt-get purge fglrx*

[AJenbo]

dmesg
...
Den er så lang at starten ikke er med.

Det er bedst at køre den i starten så du ikke får beskeder fra alle mulige events der sker efter systemet er starte, jeg kan se du har kørt den mindt 38min efter at maskinen blev tætn.

[Klaus Rasmussen]

Kørte denne:

Kode: Vælg alt

sudo apt-get purge fglrx*

Rebootede og så var problemet løst-------tror jeg. Opløsningen er nu 1680x1050

[Klaus Rasmussen]

Problemet er efter en reboot genopstået.