Ubunter skifter skærmopløsning når jeg slukker computeren

Jacoo · Indlæg af **Jacoo** » 31. jan 2008, 08:13

Hej

Jeg sidder med Ubuntu 7.10 og det har virkede 100% det sidste stykke tid, men for noget tid siden satte jeg min bærbare til fladskærmen i stuen (tv) for, at se film. Det virkede fint, men efter det starter min computer op i 640*480. Det kan jeg så bare ændre, men problemer er min tegneplade (Wacom) Den virker ikke rigtig når jeg piller ved skærm opløsningen.

Jeg håber der er nogen der kan hjælpe

Artificial Intelligence

computer specs.

og xorg.conf output.

Kode: Vælg alt

cat /etc/X11/xorg.conf

Jacoo · Indlæg af **Jacoo** » 31. jan 2008, 23:58

Det er en HP DV6000 1.73GHZ laptop med 2gb ram.

xorg.conf output siger:

Kode: Vælg alt

jacoo@RedQueen:~$ cat /etc/X11/xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"        "/dev/psaux"
        Option          "Protocol"      "auto-dev"
        Option          "HorizEdgeScroll"       "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "nVidia Corporation G72M [GeForce Go 7400]"
        Boardname       "nv"
        Busid           "PCI:1:0:0"
        Driver          "nvidia"
        Screen  0
EndSection

Section "Monitor"
        Identifier      "Standard Skærm"
        Vendorname      "Hewlett-Packard"
        Modelname       "HP D6433A Pavilion M90 Monitor"
        Horizsync       31.468-98.0
        Vertrefresh     56.0-85.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
  modeline  "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@75" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
  modeline  "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
  modeline  "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
  modeline  "2048x1536@60" 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
        Gamma   1.0
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "nVidia Corporation G72M [GeForce Go 7400]"
        Monitor         "Standard Skærm"
        Defaultdepth    24
        SubSection "Display"
                Depth   24
                Virtual 2048    1536
                Modes           "1280x960@60"   "1280x960@85"   "1280x1024@75" "1280x1024@85"   "1152x864@75"   "1280x1024@60"  "1024x768@60"   "1280x960@75"  "1024x768@70"    "1400x1050@60"  "1024x768@75"   "1400x1050@75"  "1024x768@85"  "1600x1200@65"   "832x624@75"    "1600x1200@60"  "800x600@60"    "1600x1200@75" "800x600@85"     "1600x1200@70"  "800x600@75"    "1792x1344@60"  "800x600@72"   "1856x1392@60"   "800x600@56"    "1920x1440@60"  "640x480@85"    "2048x1536@60" "640x480@75"     "640x480@72"    "640x480@60"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
  screen 0 "Default Screen" 0 0
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"

        # Uncomment if you have a wacom tablet
        #       InputDevice     "stylus"        "SendCoreEvents"
        #       InputDevice     "cursor"        "SendCoreEvents"
        #       InputDevice     "eraser"        "SendCoreEvents"
        Inputdevice     "Synaptics Touchpad"
EndSection
Section "Module"
        Load            "glx"
        Load            "v4l"
EndSection
Section "device" #                                
        Identifier      "device1"
        Boardname       "nv"
        Busid           "PCI:1:0:0"
        Driver          "nvidia"
        Screen  1
EndSection
Section "screen" #                                
        Identifier      "screen1"
        Device          "device1"
        Defaultdepth    24
        Monitor         "monitor1"
        SubSection "Display"
                Depth   24
                Modes           "640x480@60"
        EndSubSection
EndSection
Section "monitor" #                                
        Identifier      "monitor1"
        Vendorname      "Plug 'n' Play"
        Modelname       "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
        Gamma   1.0
EndSection
Section "ServerFlags"
EndSection

Jeg har garanteret pillet ved et eller andet jeg ikke skulle pille ved

Artificial Intelligence

God....what a mess. :lol:

Har du manuelt opsat din xorg fil?

thj01 · Indlæg af **thj01** » 1. feb 2008, 07:44

Der er sket et eller andet MEGET voldsomt med din xorg.conf

Angående wacom tegnepladen er problemet at følgende sektion er forkert.

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection

0'erne omkring screen 0 "Default Screen" 0 0 er ikke i min opsætning. Og du skal fjerne hash tegnene (#) før input devices.

dvs

# Uncomment if you have a wacom tablet
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"

Måske ligger lidt af problemet også i at du har to "monitor" og "screen" opsætninger

spørgsmål!

Gjorde du noget før du satte den til fjernsynet - ændrede noget - kørte et program - lod dine niece skrive et kærlighedsdigt i xorg.conf???

(PS den sidste er en joke - man skal selvfølgelig lade sin nevø skrive digtet det fordi man ved at piger og computere de ikke har det godt sammen)

thj01 · Indlæg af **thj01** » 1. feb 2008, 07:49

Her er forresten min xorg.conf fil. Det kan være du kan få ideer derfra til at løse problemet.

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "dk"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Modes "1280x800"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Artificial Intelligence

Hvis der går fuldstændig ged i den, lave en backup på din xorg.conf og kør kommandoen;

Kode: Vælg alt

sudo dpkg-reconfigure xserver-xorg

Jacoo · Indlæg af **Jacoo** » 4. feb 2008, 21:43

Sådan det hjalp med en manuel opsætning af xorg.conf

Ser det ikke rigtig (Eller mindre rodet) ud nu?

Kode: Vælg alt

Section "Files"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "dk"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizEdgeScroll"       "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "stylus"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "eraser"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "cursor"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "nVidia Corporation G72M [GeForce Go 7400]"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
        VideoRam        2000
        Option          "UseFBDev"              "true"
EndSection

Section "Monitor"
        Identifier      "Standard Skærm"
        Option          "DPMS"
        HorizSync       30-70
        VertRefresh     50-160
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "nVidia Corporation G72M [GeForce Go 7400]"
        Monitor         "Standard Skærm"
        DefaultDepth    24
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"

# Uncomment if you have a wacom tablet
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
        InputDevice     "Synaptics Touchpad"
EndSection

Jeg satte bare fjernsynet til computeren uden nogen former for programmer og lignende. Det var direkte forbindelse med en normal skærm ledning.

Jeg har nu opsat xorg.conf manuelt og slettet # tegnende ved wacom

Rigtig mange tak for hjælpen det virker igen