Installere Ubuntu 14.04.1-desktop på 2 ens computere

[AJenbo]

Det du har givet os inkludere kun hvad der skete mellem 10 minutter 1 time og 20 minutter efter opstarten. Her er det eneste jeg kan se aktivitet fra dit WiFi, prøv i stedet at køre kommandoen lige efter opstarten af maskinen så der ikke er så mange beskeder.

[Helge8800]

Det du har givet os inkludere kun hvad der skete mellem 10 minutter 1 time og 20 minutter efter opstarten. Her er det eneste jeg kan se aktivitet fra dit WiFi, prøv i stedet at køre kommandoen lige efter opstarten af maskinen så der ikke er så mange beskeder.

Det blev den nu ikke mindre af:

Kode: Vælg alt

[    1.532057] usb usb6: Product: OHCI PCI host controller
[    1.532060] usb usb6: Manufacturer: Linux 3.13.0-45-generic ohci_hcd
[    1.532063] usb usb6: SerialNumber: 0000:00:13.4
[    1.532199] hub 6-0:1.0: USB hub found
[    1.532214] hub 6-0:1.0: 2 ports detected
[    1.532345] ohci-platform: OHCI generic platform driver
[    1.532362] uhci_hcd: USB Universal Host Controller Interface driver
[    1.532470] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.535464] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.535471] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.535654] mousedev: PS/2 mouse device common for all mice
[    1.535903] rtc_cmos 00:02: RTC can wake from S4
[    1.536104] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.536148] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.536246] device-mapper: uevent: version 1.0.3
[    1.536339] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.536364] platform eisa.0: Probing EISA bus 0
[    1.536368] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.536372] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.536375] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.536378] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.536382] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.536385] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.536389] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.536392] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.536395] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.536398] platform eisa.0: EISA: Detected 0 cards
[    1.536408] cpufreq-nforce2: No nForce2 chipset.
[    1.536412] ledtrig-cpu: registered to indicate activity on CPUs
[    1.536581] TCP: cubic registered
[    1.536710] NET: Registered protocol family 10
[    1.536956] NET: Registered protocol family 17
[    1.536975] Key type dns_resolver registered
[    1.537180] Using IPI No-Shortcut mode
[    1.537334] Loading compiled-in X.509 certificates
[    1.541668] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[    1.541686] registered taskstats version 1
[    1.542981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.545203] Key type trusted registered
[    1.548113] Key type encrypted registered
[    1.550875] AppArmor: AppArmor sha1 policy hashing enabled
[    1.550881] IMA: No TPM chip found, activating TPM-bypass!
[    1.551206] regulator-dummy: disabling
[    1.551268]   Magic number: 3:87:535
[    1.551292] bdi 1:13: hash matches
[    1.551304] tty ttyS15: hash matches
[    1.551405] rtc_cmos 00:02: setting system clock to 2015-02-02 14:31:28 UTC (1422887488)
[    1.552329] powernow-k8: fid 0xc (2000 MHz), vid 0x12
[    1.552332] powernow-k8: fid 0xa (1800 MHz), vid 0x13
[    1.552334] powernow-k8: fid 0x8 (1600 MHz), vid 0x14
[    1.552335] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[    1.552375] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[    1.552382] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.552383] EDD information not available.
[    1.552416] PM: Hibernation image not present or could not be loaded.
[    1.553033] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[    1.553088] Write protecting the kernel text: 6552k
[    1.553183] Write protecting the kernel read-only data: 2768k
[    1.553185] NX-protecting the kernel data: 5736k
[    1.572283] systemd-udevd[96]: starting version 204
[    1.612782] pps_core: LinuxPPS API ver. 1 registered
[    1.612787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.618065] PTP clock support registered
[    1.625057] ahci 0000:00:12.0: version 3.0
[    1.625227] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    1.625328] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.625333] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.626379] scsi0 : ahci
[    1.626499] scsi1 : ahci
[    1.626590] scsi2 : ahci
[    1.626668] scsi3 : ahci
[    1.626727] ata1: SATA max UDMA/133 abar m1024@0x84000000 port 0x84000100 irq 22
[    1.626731] ata2: SATA max UDMA/133 abar m1024@0x84000000 port 0x84000180 irq 22
[    1.626735] ata3: SATA max UDMA/133 abar m1024@0x84000000 port 0x84000200 irq 22
[    1.626738] ata4: SATA max UDMA/133 abar m1024@0x84000000 port 0x84000280 irq 22
[    1.628087] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[    1.628095] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[    1.628105] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[    1.628111] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[    1.628117] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[    1.651325] scsi4 : pata_atiixp
[    1.655301] scsi5 : pata_atiixp
[    1.655348] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    1.655351] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    1.661052] tg3.c:v3.134 (Sep 16, 2013)
[    1.695004] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[    1.697718] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:97:db:b4
[    1.697725] tg3 0000:09:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.697729] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.697732] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.740102] firewire_ohci 0000:03:01.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    1.816546] ata5.00: ATAPI: Optiarc DVD+/-RW AD-5560A, DD11, max UDMA/33
[    1.832452] ata5.00: configured for UDMA/33
[    1.944054] ata4: SATA link down (SStatus 0 SControl 300)
[    1.948054] ata2: SATA link down (SStatus 0 SControl 300)
[    1.952056] ata3: SATA link down (SStatus 0 SControl 300)
[    2.124033] ata1: softreset failed (device not ready)
[    2.124038] ata1: applying PMP SRST workaround and retrying
[    2.240161] firewire_core 0000:03:01.4: created device fw0: GUID 434fc0003127c070, S400
[    2.296049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.297268] ata1.00: ATA-7: ST980813ASG, 3.ADD, max UDMA/133
[    2.297272] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 31/32)
[    2.297276] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.298705] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.298708] ata1.00: configured for UDMA/133
[    2.298917] scsi 0:0:0:0: Direct-Access     ATA      ST980813ASG      3.AD PQ: 0 ANSI: 5
[    2.299166] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.299231] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.299387] sd 0:0:0:0: [sda] Write Protect is off
[    2.299392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.299424] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.300442] scsi 4:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5560A DD11 PQ: 0 ANSI: 5
[    2.304102] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.304107] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.304247] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.304422] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.320046] usb 5-2: new full-speed USB device number 2 using ohci-pci
[    2.336301]  sda: sda1 sda2 < sda5 >
[    2.336807] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.578085] usb 5-2: New USB device found, idVendor=413c, idProduct=8140
[    2.578091] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.716044] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.885069] usb 3-1: New USB device found, idVendor=046d, idProduct=c03e
[    2.885072] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.885075] usb 3-1: Product: USB-PS/2 Optical Mouse
[    2.885078] usb 3-1: Manufacturer: Logitech
[    2.897435] hidraw: raw HID events driver (C) Jiri Kosina
[    2.910569] usbcore: registered new interface driver usbhid
[    2.910574] usbhid: USB HID core driver
[    2.916268] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7
[    2.916428] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1/input0
[    2.931793] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
[    2.950134] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input5
[    3.144719] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.742639] random: nonblocking pool is initialized
[    7.614059] Adding 1963004k swap on /dev/sda5.  Priority:-1 extents:1 across:1963004k FS
[    7.717851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.871202] systemd-udevd[274]: starting version 204
[    8.057517] lp: driver loaded but no devices found
[    8.079639] ppdev: user-space parallel port driver
[    8.123296] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    8.123691] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input8
[    8.124654] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.207586] wmi: Mapper loaded
[    8.252749] [drm] Initialized drm 1.1.0 20060810
[    8.388227] [drm] radeon kernel modesetting enabled.
[    8.388341] checking generic (e0000000 3d0000) vs hw (e0000000 10000000)
[    8.388343] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    8.388378] Console: switching to colour dummy device 80x25
[    8.388947] [drm] initializing kernel modesetting (RS690 0x1002:0x791F 0x1028:0x0206).
[    8.388965] [drm] register mmio base: 0xFE9F0000
[    8.388967] [drm] register mmio size: 65536
[    8.389122] ATOM BIOS: ATI
[    8.389155] radeon 0000:01:05.0: VRAM: 160M 0x0000000076000000 - 0x000000007FFFFFFF (160M used)
[    8.389159] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    8.389184] [drm] Detected VRAM RAM=160M, BAR=256M
[    8.389186] [drm] RAM width 128bits DDR
[    8.391539] Bluetooth: Core ver 2.17
[    8.391569] NET: Registered protocol family 31
[    8.391571] Bluetooth: HCI device and connection manager initialized
[    8.391582] Bluetooth: HCI socket layer initialized
[    8.391586] Bluetooth: L2CAP socket layer initialized
[    8.391592] Bluetooth: SCO socket layer initialized
[    8.393321] [TTM] Zone  kernel: Available graphics memory: 440906 kiB
[    8.393324] [TTM] Zone highmem: Available graphics memory: 966586 kiB
[    8.393326] [TTM] Initializing pool allocator
[    8.393332] [TTM] Initializing DMA pool allocator
[    8.393362] [drm] radeon: 160M of VRAM memory ready
[    8.393365] [drm] radeon: 512M of GTT memory ready.
[    8.393383] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.405261] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    8.414732] [drm] PCIE GART of 512M enabled (table at 0x0000000033580000).
[    8.415571] radeon 0000:01:05.0: WB enabled
[    8.415580] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf36c0000
[    8.415583] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.415585] [drm] Driver supports precise vblank timestamp query.
[    8.415588] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[    8.415615] radeon 0000:01:05.0: irq 42 for MSI/MSI-X
[    8.415634] radeon 0000:01:05.0: radeon: using MSI.
[    8.415663] [drm] radeon: irq initialized.
[    8.415679] [drm] Loading RS690/RS740 Microcode
[    8.420689] cfg80211: Calling CRDA to update world regulatory domain
[    8.422153] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x10c0, revision 0
[    8.422295] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x10d0
[    8.442171] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    8.442328] sp5100_tco: PCI Revision ID: 0x14
[    8.442352] sp5100_tco: failed to find MMIO address, giving up.
[    8.446726] usbcore: registered new interface driver btusb
[    8.477010] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    8.497598] yenta_cardbus 0000:03:01.0: enabling device (0000 -> 0003)
[    8.497717] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0206]
[    8.497745] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[    8.600838] type=1400 audit(1422887495.546:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=329 comm="apparmor_parser"
[    8.600849] type=1400 audit(1422887495.546:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=329 comm="apparmor_parser"
[    8.600856] type=1400 audit(1422887495.546:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser"
[    8.601534] type=1400 audit(1422887495.546:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=329 comm="apparmor_parser"
[    8.601542] type=1400 audit(1422887495.546:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser"
[    8.601880] type=1400 audit(1422887495.546:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser"
[    8.641397] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 23
[    8.641405] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[    8.641409] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
[    8.641420] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[    8.641424] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
[    8.644202]  excluding 0x2000-0x20ff 0x2400-0x24ff
[    8.650487] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0xfe600000-0xfe6fffff]
[    8.650493] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfe600000-0xfe6fffff:
[    8.650503]  excluding 0xfe6f0000-0xfe6fffff
[    8.650507] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[    8.650511] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[    8.650521]  excluding 0x80000000-0x83ffffff
[    8.657948] hda-intel 0000:00:14.2: Using LPIB position fix
[    8.659675] kvm: Nested Virtualization enabled
[    8.693627] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    8.716032] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    8.716038]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.716041]    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[    8.716043]    mono: mono_out=0x0
[    8.716044]    dig-out=0x21/0x0
[    8.716046]    inputs:
[    8.716048]      Internal Mic=0xc
[    8.716050]      Mic=0xb
[    8.721922] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    8.721928]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.721931]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.721932]    mono: mono_out=0x0
[    8.721934]    inputs:
[    8.755919] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    8.756142] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    8.808151] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.974089] input: Dell WMI hotkeys as /devices/virtual/input/input11
[    9.049483] [drm] radeon: ring at 0x0000000080001000
[    9.049509] [drm] ring test succeeded in 1 usecs
[    9.049682] [drm] Enabling audio 0 support
[    9.049704] [drm] ib test succeeded in 0 usecs
[    9.051676] [drm] radeon atom DIG backlight initialized
[    9.051682] [drm] Radeon Display Connectors
[    9.051684] [drm] Connector 0:
[    9.051687] [drm]   VGA-1
[    9.051690] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[    9.051691] [drm]   Encoders:
[    9.051693] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.051695] [drm] Connector 1:
[    9.051697] [drm]   LVDS-1
[    9.051699] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[    9.051700] [drm]   Encoders:
[    9.051702] [drm]     LCD1: INTERNAL_LVTM1
[    9.051704] [drm] Connector 2:
[    9.051706] [drm]   SVIDEO-1
[    9.051707] [drm]   Encoders:
[    9.051708] [drm]     TV1: INTERNAL_KLDSCP_DAC1
[    9.051710] [drm] Connector 3:
[    9.051712] [drm]   DVI-D-1
[    9.051713] [drm]   HPD2
[    9.051716] [drm]   DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c
[    9.051717] [drm]   Encoders:
[    9.051719] [drm]     DFP2: INTERNAL_DDI
[    9.051747] [drm] radeon: power management initialized
[    9.063234] systemd-udevd[297]: Error calling EVIOCSKEYCODE: Invalid argument
[    9.127860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[    9.129232]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[    9.130096] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[    9.130513]  excluding 0x3f0-0x3ff 0x408-0x40f 0x4d0-0x4d7
[    9.130898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[    9.131554]  clean.
[    9.131571] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[    9.131783]  excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xc80-0xcbf 0xcd0-0xcdf
[    9.132035] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    9.132042]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    9.132072] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    9.132088]  clean.
[    9.132105] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    9.132119]  excluding 0x60000000-0x60ffffff
[    9.132137] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[    9.132152]  excluding nothing: probe failed.
[    9.330264] cfg80211: World regulatory domain updated:
[    9.330271] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.330274] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.330277] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.330279] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.330281] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.330284] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.340865] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[    9.392049] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[    9.416276] Broadcom 43xx driver loaded [ Features: PNL ]
[    9.692387] [drm] fb mappable at 0xE0040000
[    9.692392] [drm] vram apper at 0xE0000000
[    9.692394] [drm] size 5300224
[    9.692396] [drm] fb depth is 24
[    9.692398] [drm]    pitch is 5888
[    9.692611] fbcon: radeondrmfb (fb0) is primary device
[    9.738736] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.960181] Console: switching to colour frame buffer device 180x56
[    9.972409] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    9.972412] radeon 0000:01:05.0: registered panic notifier
[    9.972434] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
[   12.727113] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.373738] init: failsafe main process (580) killed by TERM signal
[   14.504929] type=1400 audit(1422887501.450:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=697 comm="apparmor_parser"
[   14.504942] type=1400 audit(1422887501.450:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=697 comm="apparmor_parser"
[   14.505598] type=1400 audit(1422887501.450:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=697 comm="apparmor_parser"
[   14.859280] init: cups main process (709) killed by HUP signal
[   14.859302] init: cups main process ended, respawning
[   15.269428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.269434] Bluetooth: BNEP filters: protocol multicast
[   15.269445] Bluetooth: BNEP socket layer initialized
[   15.333972] Bluetooth: RFCOMM TTY layer initialized
[   15.333988] Bluetooth: RFCOMM socket layer initialized
[   15.334002] Bluetooth: RFCOMM ver 1.11
[   17.116053] type=1400 audit(1422887504.058:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=787 comm="apparmor_parser"
[   17.116070] type=1400 audit(1422887504.062:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[   17.116077] type=1400 audit(1422887504.062:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   17.116736] type=1400 audit(1422887504.062:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[   17.116743] type=1400 audit(1422887504.062:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   17.117079] type=1400 audit(1422887504.062:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   17.172946] type=1400 audit(1422887504.118:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=786 comm="apparmor_parser"
[   17.296060] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   17.376895] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.377292] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.403084] tg3 0000:09:00.0: irq 43 for MSI/MSI-X
[   17.438194] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.438609] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.000820] wlan0: authenticate with c4:04:15:a4:b0:be
[   20.012406] wlan0: send auth to c4:04:15:a4:b0:be (try 1/3)
[   20.216043] wlan0: send auth to c4:04:15:a4:b0:be (try 2/3)
[   20.217469] wlan0: authenticated
[   20.220055] wlan0: associate with c4:04:15:a4:b0:be (try 1/3)
[   20.222521] wlan0: RX AssocResp from c4:04:15:a4:b0:be (capab=0x431 status=0 aid=2)
[   20.222961] wlan0: associated
[   20.222990] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.223064] cfg80211: Calling CRDA for country: DK
[   20.226977] cfg80211: Regulatory domain changed to country: DK
[   20.226984] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.226987] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.226989] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.226991] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.226994] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.226996] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   20.285209] wlan0: deauthenticating from c4:04:15:a4:b0:be by local choice (reason=2)
[   20.292397] wlan0: authenticate with c4:04:15:a4:b0:be
[   20.292634] wlan0: send auth to c4:04:15:a4:b0:be (try 1/3)
[   20.293281] cfg80211: Calling CRDA to update world regulatory domain
[   20.294374] wlan0: authenticated
[   20.296127] wlan0: associate with c4:04:15:a4:b0:be (try 1/3)
[   20.297455] cfg80211: World regulatory domain updated:
[   20.297461] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.297464] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.297466] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.297469] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.297471] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.297473] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.298842] wlan0: RX AssocResp from c4:04:15:a4:b0:be (capab=0x431 status=0 aid=2)
[   20.312067] wlan0: associated
[   20.312123] cfg80211: Calling CRDA for country: DK
[   20.316168] cfg80211: Regulatory domain changed to country: DK
[   20.316174] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.316176] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.316179] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.316181] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.316183] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.316186] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   26.242896] init: plymouth-upstart-bridge main process ended, respawning
[   26.259620] init: plymouth-upstart-bridge main process ended, respawning
[   44.884484] audit_printk_skb: 132 callbacks suppressed
[   44.884490] type=1400 audit(1422887531.831:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1914 comm="apparmor_parser"
[   44.884501] type=1400 audit(1422887531.831:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1914 comm="apparmor_parser"
[   44.885164] type=1400 audit(1422887531.831:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1914 comm="apparmor_parser"
[   45.348113] wlan0: authenticate with 28:c6:8e:6e:37:41
[   45.376185] wlan0: send auth to 28:c6:8e:6e:37:41 (try 1/3)
[   45.376394] cfg80211: Calling CRDA to update world regulatory domain
[   45.380069] wlan0: authenticated
[   45.382606] cfg80211: World regulatory domain updated:
[   45.382612] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   45.382615] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   45.382618] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   45.382620] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   45.382623] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   45.382625] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   45.384063] wlan0: associate with 28:c6:8e:6e:37:41 (try 1/3)
[   45.386869] wlan0: RX AssocResp from 28:c6:8e:6e:37:41 (capab=0x411 status=0 aid=1)
[   45.387295] wlan0: associated
felippa@felippa-Latitude-D531:~$

[Helge8800]

Nu er der gået en prås op for min gamle hjerne:
Problemet med nedlukningen, som jeg startede tråden med, blev rettet med den seneste software opdatering, til gengæld fik jeg så fejlen med keyboardet.

[AJenbo]

Jo den er betydelig kortere men stadig længere end du kan se Denne gang går den dog helt til bage til 1.5 sek sefter du tænder maskinen så jeg går ud fra det er langt nok tilbage.

[Klaus Rasmussen]

Mon ikke det er denne del der er interessant:

[ 9.051747] [drm] radeon: power management initialized
[ 9.063234] systemd-udevd[297]: Error calling EVIOCSKEYCODE: Invalid argument
[ 9.127860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 9.129232] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 9.130096] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 9.130513] excluding 0x3f0-0x3ff 0x408-0x40f 0x4d0-0x4d7
[ 9.130898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 9.131554] clean.
[ 9.131571] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 9.131783] excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xc80-0xcbf 0xcd0-0xcdf
[ 9.132035] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 9.132042] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 9.132072] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 9.132088] clean.
[ 9.132105] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 9.132119] excluding 0x60000000-0x60ffffff
[ 9.132137] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 9.132152] excluding nothing: probe failed.

[AJenbo]

Her hvad jeg kan se den tager tid under opstarten:

4 sek går med at klargøre swap.
3 sek med at montere fil systemet.
1 sek med at tjekke at systemet er startet korrekt.
1 sek med at starte printer systemet.
10 sek med at få netværket op at køre.

Systemet hænger bestemt ikke på det tidspunkt du får beskeden for blot 0.06 sek senere er den igang med at søge efter PCMCIA udstyr, og 0,01 sek forinden blev strømstyring for dit grafikkort sat op.

Der er der med nok blot tale om at du får en mindre fejl at se og da det er den eneste fejl der sker mens computeren starter resten af hardware op føles det som om at maskinen hænger.

Hvis dit tastatur ellers fungere som det skal kan du ignorere fejlen, at løse den vil ikke få maskinen til at køre hurtigere.

[Helge8800]

Der er der med nok blot tale om at du får en mindre fejl at se og da det er den eneste fejl der sker mens computeren starter resten af hardware op føles det som om at maskinen hænger.

Hvis dit tastatur ellers fungere som det skal kan du ignorere fejlen, at løse den vil ikke få maskinen til at køre hurtigere.

I har været en stor hjælp med at sætte disse to computere op. Jeg lukker for nu og håber at den lille fejl bliver løst med den næste opdatering. Tak for nu!